DSPPA DSP5211C 10W 100V Coaxial Frameless Ceiling Speaker
102.20ر.س
Product description
The DSPPA DSP5211C is a 6.5-inch frameless coaxial ceiling speaker that runs on 100V lines with 3W, 6W and 10W taps. It is made for PA and background music systems that hang many speakers on one amplifier, in schools, offices and hospitals.
====
The DSPPA DSP5211C is a 6.5-inch coaxial ceiling speaker rated at 10W, with a built-in transformer for 100V lines. That lets you build a full PA system around it: dozens of speakers in classrooms, corridors and offices, all running from a single output on a PA amplifier. The frameless white grille suits the gypsum ceilings found in most modern buildings.
DSPPA DSP5211C specifications
From DSPPA's official product page and the DSP5211/DSP5211C datasheet:
- 6.5-inch woofer with a 0.75-inch coaxial tweeter.
- 10W RMS on a 100V line.
- Taps at 3W, 6W or 10W.
- Sensitivity 93±2dB, maximum SPL 103±2dB.
- Frequency response 90Hz to 18kHz.
- Size Φ190 x 105mm, weight 1.1kg.
Three taps and sizing the amplifier
Each speaker draws whatever power its tap is set to. A classroom or quiet office needs only 3W; a corridor or waiting area may need 6W or 10W. Take a school with 30 classrooms at 3W each plus 10 corridor speakers at 6W. That totals 150W, so a 250W PA amplifier covers it with room to expand.
Why coaxial?
In a coaxial driver, the tweeter sits at the center of the woofer, so highs and lows leave the same point. With 93dB sensitivity, speech stays clear even on a low tap. DSPPA reports that the speaker passed IEC 268-5 power handling tests over 100 hours of continuous operation and can briefly take twice its rated power.
Installation
Spring clips hold the speaker in a round cutout in the suspended ceiling. The body is 105mm deep, so check the void above the tiles. The grille is carbon-alloy aluminum with a RAL white coating.
Splitting a building into zones
In schools and hospitals, you rarely want every area hearing the same thing. Wire each floor or wing on its own line from a zoned amplifier, then page one wing, play music only in reception and ring the class bell in classrooms. Because the DSP5211C runs on a 100V line, cable runs between floors can be long without noticeable loss, and you can add speakers later as long as the total tap load stays under the amplifier rating.
Where it is used in Saudi Arabia
- School PA systems and class bells in classrooms and corridors.
- Offices and branches: announcements and quiet background music.
- Hospitals and clinics: paging in waiting areas.
- Malls and retail: background music across large floors.
- Hotels: corridors and reception areas.
DSP5211C or DSP5211L?
Both belong to the same series and share the same acoustics: a 6.5-inch woofer, a 0.75-inch tweeter, 10W, 93dB sensitivity and a 90Hz to 18kHz response. The difference is the connection. The DSP5211C runs on a 100V line with 3W, 6W and 10W taps, while the DSP5211L is an 8-ohm speaker with no transformer. The DSP5211C body is also deeper (105mm versus 80mm) and heavier (1.1kg versus 0.8kg). Choose the DSP5211C for PA systems with many speakers and long cable runs, and the DSP5211L for a small room on an 8-ohm amplifier.
Frequently Asked Questions
Does the DSP5211C work with a standard 8-ohm amplifier?
No. It is built for 100V lines and needs a PA amplifier with a 100V output. For 8-ohm systems, choose the DSP5211L.
How many can a 120W amplifier drive?
Add up the taps: 30 speakers at 3W total 90W, which a 120W amplifier handles. At the 10W tap, plan on about 10 speakers with headroom.
Specifications
- Model: DSP5211C
- Series: DSP5211 coaxial frameless ceiling speaker
- Drivers: 6.5" woofer x1 + 0.75" coaxial tweeter x1
- Rated power (RMS): 10 W
- Rated voltage: 100V
- Power taps: 3W / 6W / 10W (100V)
- Sensitivity (1W/1m): 93±2 dB
- Max. SPL (1m): 103±2 dB
- Frequency response: 90Hz - 18kHz
- Dimensions: Φ190 × 105 mm
- Weight: 1.1 kg
- Grille: Carbon-alloy aluminum mesh, RAL white coating, thin-edge frameless design
- Magnet and cone: Magnet system encapsulated in engineering plastic; treated paper cone
- Power handling test: IEC 268-5 (PHC), 100 hours continuous, SAFE tested; handles 2x rated power for short periods
- Mounting: Spring clips in a ceiling cutout
Features
- 100V line with 3W, 6W and 10W taps: run dozens of speakers from one amplifier and set each zone.
- 0.75-inch tweeter mounted inside a 6.5-inch woofer: clearer sound and wider coverage below.
- 93±2dB sensitivity and 103±2dB max SPL: good level even on a low tap.
- Thin-edge white aluminum grille, no frame: sits flush in gypsum ceilings.
- IEC 268-5 tested for 100 hours continuous: ready for long daily operation in schools and malls.
