Uniview PKC2640@Z80-P 4MP LPR Camera with 8-32mm Zoom Lens

The Uniview PKC2640@Z80-P is a 4MP LPR camera with a motorized 8-32mm zoom that reads plates from further away at up to 80 km/h and opens the barrier via an onboard allowlist and relay. It fits entrances where the camera has to sit well back from the lane.

====

The Uniview PKC2640@Z80-P belongs to the PKC2640 family. It combines a 4MP sensor, an onboard allowlist and a barrier relay with a motorized 8-32mm zoom that pulls the plate in from further away. It is the pick when the camera cannot sit right beside the gate, or when you want the plate read early enough for the barrier to be rising as the car arrives.

Uniview PKC2640@Z80-P lens: when you need it

Horizontal view runs from 42.4° to 15.9°. A tighter view means the plate takes up more of the frame at distance, so the characters stay crisp. Because the zoom is motorized, the installer can frame the lane from the camera interface after mounting instead of loosening and re-aiming the unit.

• 1/1.8-inch 4MP sensor, 2688×1520.
• Plate reading up to 80 km/h on regular roads.
• Sensitivity down to 0.002 lux at F1.7, with 120 dB WDR.

Allowlists and barrier policies

The camera stores 20,000 plates in its allowlist and another 20,000 in its blocklist, with import, export, add and delete. In the settings you decide when the barrier opens: for any recognized plate, for everyone, for allowlisted cars only, or for any car not blocklisted. The command leaves through a built-in relay rated AC 125V/0.3A or DC 30V/1A, and two Boolean inputs accept signals such as a loop detector or manual open button.

Illumination and image

This version uses warm light: 4 LEDs covering 50 m that switch on and off with ambient light. A PKC2640@Z80-IR-P version with infrared LEDs exists for sites that prefer IR. Every snapshot carries the plate, time, device ID and allowlist status, while 8 ROI zones and H.265 or H.264 over triple streams keep storage and bandwidth in check.

Security and network integration

Logins are protected by weak-password detection and account lockout, alongside HTTPS, RTSP authentication, IP filtering and gateway ARP protection. ONVIF (Profiles S, G and T), SDK and API cover third-party integration, and SNMP supports network monitoring. It connects over 10/100 Mbps, takes 802.3at PoE or 12V DC with a 20 W maximum, and records to microSD up to 256GB with ANR.

Where it fits in Saudi Arabia

• Large compounds where the access road runs some distance before the gate.
• Warehouse and factory gates, with the camera on a pole clear of truck traffic.
• Wide mall entrances where the camera has to be mounted higher than usual.
• Internal roads on university and hospital campuses.

Frequently Asked Questions

What separates the PKC2640@Z80-P from the PKC2640@Z80-IR-P?

The illumination: the P version has 4 warm-light LEDs and the IR-P version 4 infrared LEDs, both rated for 50 m.

Can I adjust the zoom after mounting?

Yes. The 8-32mm lens is motorized, so zoom is set from the camera interface without touching the unit.

Specifications

• Model: PKC2640@Z80-P
• Category: Access ANPR camera
• Sensor: 1/1.8-inch 4MP CMOS
• Lens: Motorized zoom, 8 to 32 mm
• Shutter: Auto/manual, 1/30 to 1/100000 s
• Min. illumination: 0.002 lux (F1.7)
• Field of view: H 42.4° to 15.9°, V 23.9° to 9.8°, D 52.5° to 17.8°
• WDR: 120 dB
• Image capture format: 2688×1520@30 (default), 2688×1520@25
• Streams: Main 2688×1520, 1080P (default), 720P, D1; sub 720P (default), D1, 2CIF, CIF; third D1 (default), 2CIF, CIF
• Frame rate: Up to 30 fps (default), down to 1 fps
• Compression: H.264 (default), H.265
• ROI: Up to 8 regions
• Video OSD: 8 areas: date, time, zoom ratio, custom text
• Image OSD: 8 areas: time, plate number, device ID, camera ID, allowlist, image authentication ID, 3 custom items, location
• Application scenario: Regular roads, up to 80 km/h
• Vehicle detection: Video detection
• Plate recognition: Letters and numbers by default
• Lists: Allowlist and blocklist, 20,000 entries each; import, export, add, delete
• Barrier opening policy: Recognized vehicles, all vehicles, allowlist only, not on blocklist; configurable Boolean output ID
• Edge storage: Micro SD up to 256 GB with ANR
• Illumination: Built-in, 4 warm-light LEDs, 50 m, automatic on/off
• Bracket and junction box: 3-axis bracket; junction box for tail cable (included)
• Protocols: IPv4, IPv6, TCP, UDP, RTSP, HTTP, HTTPS, DHCP, PPPoE, DNS, DDNS, NTP, UPnP, 802.1x, SNMP, QoS, SSL/TLS, SSH, IGMP, ICMP, ARP
• Integration: ONVIF Profile S, G, T; SDK; API
• Security: Password protection with weak-password detection and account lockout, HTTPS, RTSP authentication, IP filtering, gateway ARP protection
• Network port: 1 × 10/100M RJ45
• Serial port: 1 × RS485
• Relay output: 1, AC 125V/0.3A or DC 30V/1A
• Boolean inputs: 2 (level up to DC 5V or switch signal)
• Audio: 1 input, 1 output (audio capture and intercom)
• BNC: PAL / NTSC
• Reset button: Supported
• Power: DC 12V (+25%/-10%) or PoE (802.3at, Class 4), max 20 W
• Dimensions: 406 × 126 × 130 mm
• Weight: 2.1 kg
• Operating environment: -40°C to 60°C, up to 90% RH
• Protection: IP67, IK10, aluminium body
• Heater: N/A
• Optional accessory: TR-UP06-C-IN pole mount (junction box only)

Features

• Motorized 8-32mm zoom with a 42.4° to 15.9° horizontal view: the plate fills the frame even when the camera sits far back.
• Reads up to 80 km/h on roads: suits entrances where cars roll toward the barrier without a full stop.
• 20,000 plates in each of the allowlist and blocklist, with 4 opening policies: barrier control from the camera itself.
• Account protection: weak-password detection and lockout after failed logins, plus HTTPS and IP filtering.
• Aluminium body rated IP67 and IK10: handles dust and rain and runs from -40°C to 60°C.