DSPPA DSP643G 6.5-Inch 20W Landscape Rock Speaker

267.16

Product description


The DSPPA DSP643G is a landscape rock speaker with a 6.5-inch full-range driver, 20W rated power (40W max) and a built-in 70V/100V transformer. Its damage-resistant resin shell suits parks, car parks, mall plazas and school grounds.

====

The DSPPA DSP643G is a landscape rock speaker built around a 6.5-inch full-range driver, rated at 20W with 40W maximum power. A 70V/100V transformer is built in, so it slots straight into PA systems with long cable runs. DSPPA aims it at public spaces: parks, plazas, train stations, shopping malls, car parks and factories, for both background music and announcements.

DSPPA DSP643G specifications

  • Driver: 6.5-inch full range.
  • Power: 20W rated, 40W maximum.
  • Sensitivity 87±2 dB, maximum SPL 100±2 dB.
  • Frequency response 100Hz to 15kHz, THD below 1.5%.
  • Size 380×250×320 mm, weight 5.0 kg.

Built-in transformer for long cable runs

In a large park or car park, the speaker cable can run hundreds of meters from the equipment room. The internal transformer works with a 70V or 100V line, which cuts losses along the cable so the last speaker sounds close to the first. DSPPA also points out that it makes parallel wiring of many speakers simple.

Damage-resistant shell for public areas

The rock-shaped enclosure is high-class resin with a heavy-duty, damage-resistant finish, which matters in car parks and public gardens where speakers get knocked and touched. DSPPA calls it weatherproof and fits a waterproof driver, but does not publish an IP rating.

Concrete-base installation

The speaker sits on a concrete base with two 8 mm studs protruding 3 cm, then two nuts lock it down. Once fixed it is hard to shift or carry off, which is exactly what you want in a public park or an open mall plaza.

Where the DSP643G fits in Saudi Arabia

  • Car parks at malls and office towers: announcements and visitor guidance.
  • Mall outdoor plazas: background music around entrances and fountains.
  • Public parks and neighborhood walkways: municipal announcements and soft music.
  • Schools: landscaped yards on the school PA system.
  • Factories and warehouses: paging across outdoor yards.

Sizing the amplifier

Add up the power of every speaker on the line. Ten speakers at 20W need a PA amplifier of at least 200W, ideally with some headroom.

Use direct-burial cable or conduit for the underground runs and keep joints in waterproof boxes, especially on lawns that are watered daily.

DSP643G or DSP636?

The DSP643G has less power than the DSP636 (20W against 30W), response to 15kHz against 20kHz, 100 dB max SPL against 102 dB, and weighs 5.0 kg against 4.2 kg. In return it documents a 6.5-inch driver and a concrete-base mounting method, while the DSP636 carries an official IPX6 rating. Choose the DSP643G for car parks and public areas, and the DSP636 for wider coverage.

Frequently Asked Questions

Does the DSPPA DSP643G need a special amplifier?

It runs on 70V or 100V lines through its built-in transformer, so use a PA amplifier with a 70V or 100V output.

How is it installed in a garden?

On a concrete base with two 8 mm studs protruding 3 cm, fixed with two nuts, as shown in DSPPA's datasheet.

Is it suitable for car parks and public spaces?

Yes. DSPPA lists car parks, malls, train stations and factories among its uses, and the shell has a damage-resistant finish.

Specifications

  • Model: DSP643G
  • Type: Landscape weather-resistant rock speaker
  • Driver: Full range 6.5" ×1
  • Rated power: 20 W
  • Max power: 40 W
  • Sensitivity (1m, 1W): 87 dB ±2 dB
  • Max SPL (1m): 100 dB ±2 dB
  • Frequency response: 100Hz - 15kHz
  • THD: <1.5% (1W, 1m, 200Hz - 10kHz)
  • Transformer: Built-in 70V/100V transformer
  • Material: High-class resin, damage-resistant finish
  • Dimensions (L×W×H): 380×250×320 mm
  • Weight: 5.0 kg
  • Installation: Concrete base with two 8 mm studs protruding 3 cm, secured with two nuts

Features

  • 6.5-inch full-range driver: one coherent voice for announcements and background music from 100Hz to 15kHz.
  • Built-in 70V/100V transformer: lower line losses on long cable runs and easy parallel wiring of many speakers.
  • 5.0 kg resin body with a damage-resistant finish: made for public spaces like car parks and parks.
  • Bolts to a concrete base with two 8 mm studs: stays put and is hard to move or remove.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌