Fanvil i68 IP Door Phone with 8-inch Touchscreen and Bluetooth Entry
2930.20ر.س
Product description
The Fanvil i68 has the largest screen in Fanvil's i6 face recognition line: an 8-inch 800×1280 touchscreen, two 2MP cameras and seven entry methods, including Bluetooth and remote opening. It suits office entrances, hotel lobbies and modern residential buildings.
====
The Fanvil i68 brings the biggest screen in Fanvil's i6 face recognition range: a portrait 8-inch IPS touchscreen at 800×1280, with two 2MP cameras above it. It opens the door seven different ways, Bluetooth and remote opening among them, from an aluminum housing. It suits office entrances, hotel lobbies and modern buildings.
What the Fanvil i68 does
It is a SIP video intercom, face recognition terminal and card reader in one panel. A visitor calls the person they came to see, who answers on an indoor monitor, an IP phone or a smartphone, then releases the door.
- 8-inch touchscreen at 800×1280.
- Two 2MP cameras with a 1/2.8-inch sensor and a 62° by 37.4° view.
- Automatic lighting, working down to 0.1 lux.
- Full-duplex HD audio with smart noise reduction.
- IP66 against dust and water, IK07 against impact.
Walk in by face or by phone
Face recognition is the main credential, backed by liveness detection that rejects images, videos and masks. Staff who would rather not carry a card can use the Fanvil Link app to open the door over Bluetooth (BLE) or show a QR code. IC/ID cards, PINs, DTMF tones and remote opening also work. Admins enroll faces at the panel itself or upload a photo through the web interface.
Cards and access control wiring
The reader handles 13.56 MHz and 125 kHz cards, including Mifare Classic 1K/4K, DESFire, Ultralight and Plus. Wiegand input and output in 26 and 34-bit formats let the i68 feed an existing access controller or take input from an external reader. On the back you will find a built-in relay for the lock, inputs for an exit button and door sensor, and a gravity-sensing tamper alarm.
Power and mounting
The i68 needs 802.3at Class 4 PoE+ and draws 7.9 to 23.1 W, so check your switch port budget. Without PoE+, use a 12V/2A adapter. It mounts on the wall surface over a Type 86 back box or in a wall recess, and Fanvil recommends placing the camera 1.4 m above the floor. Operating range is -20°C to +55°C.
Typical uses in Saudi Arabia
- Corporate offices in Riyadh and Dammam: employees enter by face or phone, visitors call reception.
- Hotel lobbies in Makkah and Madinah: a large, readable screen for guests and card access for staff.
- Modern residential towers: an aluminum panel that sits well on glass or marble.
- Clinics and training centers: entry rights assigned by face or card.
PBX and camera integration
Signaling is SIP 2.0 over UDP, TCP or TLS, with two SIP accounts at once, so the i68 calls Fanvil indoor stations such as the i507W, IP phones and SIP phone systems. ONVIF Profile S lets an ONVIF recorder view and record its camera, and an open API is available for developers.
Fanvil i68 or i67?
The i67 uses a 7-inch 600×1024 screen and adds two relays for two doors, three inputs and two outputs, a reserved RS-485 port and a line out, plus flush mounting with the EX103 bracket. It does not list Bluetooth entry and runs up to +60°C. Choose the i68 for a single-door entrance where you want the larger screen and phone-based entry.
Frequently Asked Questions
Can I open the Fanvil i68 from my phone?
Yes. The Fanvil Link app opens it over Bluetooth (BLE) or with a QR code, and remote opening works during a call.
Will a standard PoE switch power the i68?
It needs 802.3at Class 4 PoE+ because it can draw up to 23.1 W. If your switch only offers standard PoE, use a 12V/2A adapter.
How many doors can the i68 control?
The user manual lists one built-in relay, so it suits a single-door entrance. For two doors from one panel, look at the i67 with two relays.
Specifications
- Model: i68
- Series: Fanvil i6 Series (Face Recognition Door Phone)
- Panel type: Multi-apartment, community, hotel
- Display: 8-inch IPS touchscreen, 800×1280
- Housing and color: Aluminum, gunmetal
- Camera: 2 × 2MP
- Image sensor: 1/2.8-inch
- Field of view: 62° H, 37.4° V
- Illumination: Automatic lighting
- Minimum illumination: 0.1 Lux
- Video codec: H.264 (Baseline, Main Profile)
- Entry methods: Face, IC/ID card, PIN, QR code, DTMF, remote opening, BLE
- Card types: Mifare Classic 1K/4K, Mifare DESFire, Mifare Ultralight, Mifare Plus
- Card frequency: 13.56 MHz and 125 kHz
- Anti-spoofing: Liveness detection against images, videos and masks
- Audio: Full-duplex HD audio with smart noise reduction
- Signaling: SIP 2.0 over UDP/TCP/TLS
- SIP accounts: 2 simultaneous
- ONVIF: Profile S
- Integration: Open API
- Relay: 1 built-in relay
- Inputs / outputs: Short-circuit inputs/outputs (2 inputs)
- Wiegand: Wiegand input/output, 26 and 34-bit
- Tamper alarm: Yes (gravity sensing)
- Motion detection: Yes
- PoE: 802.3at Class 4
- Power adapter: 12V DC / 2A (if not using PoE+)
- Power consumption: PoE: 7.9-23.1W; adapter: 6.8-21.5W
- Dimensions: 123.8 × 20.5 × 240 mm (as listed in the datasheet)
- Installation: Wall mount, over a Type 86 box or in a wall recess
- Recommended mounting height: 1.4 m from floor to camera
- Protection: IP66 / IK07
- Operating temperature: -20°C to +55°C
- Storage temperature: -40°C to +70°C
Features
- 8-inch IPS touchscreen at 800×1280: a clear interface for visitors to pick a person or flat and see the face recognition result.
- Two 2MP cameras with auto lighting down to 0.1 lux: face recognition day and night, with liveness checks against photos and masks.
- 7 entry methods including Bluetooth (BLE) and remote opening: staff open the door from their phone via the Fanvil Link app, no card needed.
- Dual-frequency reader (13.56 MHz and 125 kHz) and Wiegand 26/34 in and out: works with MIFARE cards and existing access controllers.
- 802.3at PoE+ power and IP66/IK07 rating: one cable for power and data, in an aluminum body.
