DSPPA MAG6835F 4-Channel Network Digital Amplifier, 4x350W

7528

Product description


The DSPPA MAG6835F packs four 350W network amplifier channels into a 2U rack chassis, each with its own network port, MIC and AUX inputs and SD card. It suits large projects such as malls and education campuses that need many zones in little rack space.

====

The DSPPA MAG6835F is built for crowded equipment rooms on large projects. Instead of four separate amplifiers, you get four 350W channels in a single 2U rack unit, each with its own network port, SD card and local inputs. The result is four independent zones run by the PA server, with 1400W of total power on 100V lines.

DSPPA MAG6835F at a glance

  • Output: 4x350W, 100V constant-voltage.
  • Network: 4 RJ45 ports, one per channel; daisy-chaining between units is not supported.
  • Decoding: MP3, WMA, WAV and PCM up to 48kHz, 16-bit.
  • Local inputs: 4 MIC, 4 AUX IN and 4 AUX OUT.
  • Consumption: 1720W from AC220–240V at 50 or 60Hz.
  • Size: 483×420×88 mm, 9.45kg net.

Every channel is its own amplifier

The server sees each channel as a separate endpoint. That means background music in one zone, a promotional message in another and an emergency page in the remaining two, all at the same time. Each channel has a microphone input with a DIP switch for 5mV (dynamic or electret mics) or 100mV (wireless mics and intercom receivers). Each channel also stores its own schedule on a dedicated Micro SD card, so a zone keeps running its program if the network drops.

Per-channel backup and a web interface

Every channel has a 100V external input on the back. Feed it from another amplifier and it can cover that channel, with an optional parallel attachment that fits onto the terminals. There are also four host-controlled EMC override outputs, each 24V at 1A plus a dry contact. Setup happens in a password-protected web page: network settings, AUX/MIC/network priority, standby mode and scheduling.

Projects that suit the MAG6835F in Saudi Arabia

  • Large malls: four floors or four wings from one rack.
  • Education campuses and universities: one zone per building with its own bell schedule.
  • Domestic airports and transport hubs: separate halls with different announcements.
  • Large hospitals: several departments with different paging priorities.

Compatibility and installation

The unit is part of DSPPA's MAG6000 IP network PA system and works with any network switch. It takes 2U of rack space and needs proper ventilation, since it draws 1720W at full load. Keep the speaker load on each channel within 350W.

MAG6835F or four MAG6835 units?

Four MAG6835 units give the same 4x350W but take 4U, and each brings its own digital display, USB port and redundant pair of LAN ports. The MAG6835F fits it all in 2U with one network port per channel and LED indicators instead of a display, and it adds a web interface and a mic sensitivity switch. Pick it when rack space is tight and the zone count is high.

Frequently Asked Questions

How many zones does the DSPPA MAG6835F cover?

Four independent zones, each with a 350W channel and its own network port that can receive a different program.

Can I plug in a wireless microphone directly?

Yes. Set the DIP switch to 100mV for wireless mics and intercom receivers, or 5mV for standard mics.

What rack space does it need?

2U in any 19-inch rack, with good ventilation since it can draw up to 1720W.

Specifications

  • Model: MAG6835F
  • Type: Four-channel network digital amplifier, 2U rack
  • Rated output power: 4×350W
  • AUX IN: Sensitivity 330mV ±50mV, 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥80dB (A-weighted)
  • AUX OUT: 1000mV ±100mV
  • MIC input: Sensitivity 5mV ±1mV / 100mV ±10mV (DIP switch), 80Hz–10kHz (±3dB), distortion ≤1%, SNR ≥75dB (A-weighted)
  • SD/NET playback: 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥80dB
  • 100V constant-voltage output: 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥75dB (A-weighted)
  • Decoding: MP3, WMA, WAV, PCM; up to 48kHz, 16-bit
  • Network ports: 4× RJ45 (LAN1/LAN2/LAN1/LAN2); daisy-chain not supported
  • Local I/O: 4× AUX IN, 4× AUX OUT, 4× MIC IN, with AUX volume knobs and MIC volume buttons
  • EMC override output: 4 host-controlled outputs: 24V-COM at 1A, SC-COM dry contact at 1A
  • 100V external backup input: Per channel, with optional 100V backup parallel attachment
  • SD card: 4× Micro SD, up to 32GB, stores timing points
  • Front indicators: POWER plus 4 groups of 5 LEDs: Net, Timing, Signal, CLIP, PROT
  • Management: Web UI: network, password, language (Chinese/English), offline schedule, standby mode, 100V backup, AUX/MIC/network priority
  • Other functions: Clock sync with host, watchdog, network error correction, 3 broadcast tiers (background, business, emergency)
  • Protection: Overcurrent, overheating, overvoltage
  • Power supply: AC220–240V/50Hz or AC220–240V/60Hz
  • Rated power consumption: 1720W
  • Chassis: Silver anodized aluminum front, industrial gray iron chassis, 2U rack
  • Net weight: 9.45kg
  • Unit dimensions (L×W×H): 483×420×88 mm

Features

  • 4 channels x 350W at 100V: four independent zones totaling 1400W in one 2U unit.
  • 4 RJ45 ports, one per channel: each channel appears to the server as its own endpoint with its own program.
  • Offline scheduling on 4 Micro SD cards: every zone keeps its timed program if the network drops.
  • 100V backup input on each channel: hook up another amplifier as cover, with an optional parallel attachment.
  • Password-protected web interface: set network, priority, standby and schedules from a browser.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌