DSPPA D7A All-Metal Tripod Microphone Stand with Boom Arm

259.47

Product description


The DSPPA D7A is an all-metal tripod floor stand with a boom arm that extends to 1250 mm. It holds a handheld microphone between 910 and 1530 mm high, folds for transport, and works with wired or wireless handheld mics in schools, event halls, stages and mosques.

====

The DSPPA D7A is an all-metal floor stand that holds a handheld microphone at the height and angle each speaker needs, so their hands stay free for notes or a presentation clicker. The column adjusts from 910 to 1530 mm, the boom arm extends from 705 to 1250 mm, and the tripod legs fold flat for transport. DSPPA rates it for wired, wireless and certain dynamic microphones.

DSPPA D7A microphone stand specifications

All figures below come from the product page and datasheet on DSPPA's official site:

  • Construction: all-metal.
  • Column height: 910-1530 mm.
  • Boom arm length: 705-1250 mm.
  • Tube diameters: 25.4 mm main, 20 mm middle, 24 mm legs.
  • Folded length 950 mm, net weight 3.25 kg.

Why a boom arm matters

A straight stand forces the speaker to stand right behind the base. A boom reaches out horizontally over a lectern, a table or an instrument, so the base sits to one side and nobody trips over it. The pivot locks with a tight knob, which keeps the mic from drooping halfway through a speech, and the head rotates 360° so you can aim the capsule at the speaker from any side. The tip carries a standard mic clip for typical handheld microphones.

Stable on the floor, easy to carry

The tripod legs are 330 mm long with non-slip feet, so the stand stays planted on the marble and ceramic floors common in Saudi halls and schools. The all-metal frame handles repeated setup and teardown between events. When you are done, fold the legs and drop the column; at 950 mm it fits in a storage room or a car boot.

Where it gets used

  • School morning assemblies: students speak hands-free and the teacher resets the height for each one in seconds.
  • Event halls and hotel ballrooms: opening remarks, graduation ceremonies and conference introductions.
  • Mosques and prayer halls: a fixed mic for lessons and talks delivered standing.
  • Stages, training rooms and recording studios, which DSPPA lists as target uses.
  • Istirahas and desert camps: folds up and travels with a portable sound system.

Which microphone goes on it?

The stand ships without a microphone, so pick one for the job. For a fixed spot, a wired handheld such as the DSPPA D6561 plugged into your amplifier is enough. For presenters who move around a stage or between rows, the DSPPA MAG6551 wireless system or the D5811 wireless handheld works well: park it on the stand for the speech and lift it off when needed. At events with several speakers, one stand per speaker saves passing a mic from hand to hand.

D7A stand or a desktop mic like the DM30?

It comes down to how people speak. The DM30 has its own 115 × 138 mm metal base and a 455 mm tube, and sits on a table in front of a seated presenter. The D7A stands on the floor and holds a separate handheld mic up to 1530 mm high, which suits standing speakers and stages with no table. If you already own a handheld mic, the D7A turns it into a fixed mic without buying another one.

Frequently Asked Questions

How tall does the DSPPA D7A go?

The column adjusts from 910 to 1530 mm, and the boom extends from 705 to 1250 mm.

Does it include a microphone?

No. It is a stand with a standard mic clip; pair it with a wired handheld like the D6561 or a wireless one like the D5811.

Is it foldable?

Yes. The tripod legs fold and the stand packs down to 950 mm, with a net weight of 3.25 kg.

Specifications

  • Model: D7A
  • Type: Floor microphone stand with boom arm (Companion Microphone Stand)
  • Material: All-metal
  • Feet tube diameter: 24 mm
  • Main tube diameter: 25.4 mm
  • Middle tube diameter: 20 mm
  • Boom arm outer tube diameter: 15 mm
  • Boom arm inner tube diameter: 11 mm
  • Feet tube length: 330 mm
  • Folded height: 950 mm
  • Lifting height: 910-1530 mm
  • Boom arm length: 705-1250 mm
  • Rotation: 360°
  • Base: Foldable tripod with non-slip foot pads
  • Boom pivot: Lock-tight pivot knob
  • Mic holder: Standard mic clip
  • Net weight: 3.25 kg

Features

  • 910-1530 mm column height: one stand adjusts for a student at the morning assembly or a host at a gala.
  • Boom arm extends from 705 to 1250 mm: reach over a lectern or table while the base stays out of the way.
  • All-metal build with a 25.4 mm main tube: made for frequent setup and teardown.
  • Tripod base with 330 mm legs and non-slip feet: stays put on marble and tiled floors.
  • 360° rotation and a 950 mm folded length: aim the mic from any angle, then pack it away in a small space.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌