DSPPA DSP204H 30W Explosion-Proof Horn Speaker, Ex db IIC T6 Gb
1602.96ر.س
Product description
The DSPPA DSP204H is a 30W paging horn in a flameproof housing marked Ex db IIC T6 Gb, running on a 100V line with IP65 protection. It is made for fuel stations, chemical plants and petroleum sites where flammable gas may be present.
====
The DSPPA DSP204H is a 30W explosion-proof horn speaker with a flameproof housing marked Ex db IIC T6 Gb and an IP65 rating. DSPPA designed it for paging, broadcasting and emergency messages on sites where flammable gas can be present, such as chemical plants, fuel stations and petroleum facilities. It runs on a standard 100V line with 105dB sensitivity.
DSPPA DSP204H specifications
Figures from DSPPA's official product page:
- Rated power: 30W on a 100V line.
- Sensitivity: 105dB.
- Effective frequency range: 400Hz to 10kHz.
- Explosion protection: flameproof enclosure, marked Ex db IIC T6 Gb.
- Ingress protection: IP65.
- Size and weight: 250 × 250 × 355mm, 7kg.
Reading the Ex db IIC T6 Gb marking
The marking tells you where the speaker may be installed in an explosive atmosphere. "db" stands for a flameproof enclosure that contains any internal spark so it cannot ignite the surrounding gas. "IIC" is the most demanding gas group, covering gases such as hydrogen and acetylene. "T6" is the temperature class: the surface never exceeds 85°C, the same limit DSPPA lists in the specs. "Gb" is the equipment protection level for areas where gas is likely to occur occasionally during normal operation. Confirm your zone classification with the project's safety engineer before ordering.
Installation and operating conditions
The DSP204H operates from -20 to +40°C and up to 95% relative humidity at 25°C. At 7kg it needs a solid wall or pole and suitable fixings. Aim the horn at the work area rather than a nearby wall so the sound reaches people directly. The amplifier is not explosion-proof, so it stays in the control room outside the hazardous area while the 100V line runs out to the speaker.
Where it fits in Saudi Arabia
- Fuel stations: staff paging and emergency alerts around the pump islands.
- Chemical and petrochemical plants in the industrial cities.
- Stores for flammable materials and gas cylinder rooms.
- Tank farms and process areas that need a PA channel for instructions.
System compatibility
Connect the DSP204H to any amplifier with a 100V output, whether that is a mixer amplifier on a general paging system or one zone of a voice evacuation system. Load planning works like any 100V speaker: each unit counts as 30W, so five speakers need an amplifier rated above 150W with headroom. On larger sites, split the speakers across several zones so the pump area and the office block can receive different instructions, and one damaged line does not silence the whole system.
DSP204H or DSP1650?
The deciding factor is explosion protection. The DSP204H carries the Ex db IIC T6 Gb marking; the DSP1650 is a standard weatherproof horn without it. On paper, the DSP204H is 30W, IP65, 7kg with a 400Hz to 10kHz range, while the DSP1650 is 50W, IP66, 4.2kg with a 280Hz to 4.5kHz range. Use the DSP204H only where the area is classified as hazardous, and the DSP1650 everywhere else outdoors.
Frequently Asked Questions
Is the DSP204H really explosion-proof?
DSPPA lists it as flameproof with the marking Ex db IIC T6 Gb. Check your zone classification with your safety engineer.
Does it work with a standard amplifier?
Yes, on any 100V amplifier output, as long as the amplifier itself is installed outside the hazardous area.
Can it be installed outdoors?
It is rated IP65 and operates from -20 to +40°C at up to 95% humidity, so outdoor and humid sites are fine.
Specifications
- Model: DSP204H
- Type: Explosion-proof horn speaker
- Rated power: 30 W
- Line voltage: 100 V
- Sensitivity: 105 dB
- Effective frequency range: 400 Hz to 10 kHz
- Explosion-proof type: Flameproof
- Explosion-proof marking: Ex db IIC T6 Gb
- IP rating: IP65
- Operating temperature: -20°C to +40°C
- Operating humidity: ≤95% RH at +25°C
- Max surface temperature: ≤85°C
- Dimensions (W × H × D): 250 × 250 × 355 mm
- Weight: 7.0 kg
Features
- Flameproof housing marked Ex db IIC T6 Gb: built for areas where flammable gas may be present.
- Surface temperature capped at 85°C: matches the T6 temperature class in the marking.
- 30W on a 100V line with 105dB sensitivity: paging that carries across plant yards.
- 400Hz to 10kHz effective range: clear emergency messages and instructions.
- IP65 and up to 95% RH operation: suited to outdoor and humid locations.
