Huawei S210-24P2J 24-Port Gigabit PoE+ Switch with 400W Budget

1265

Product description


The Huawei S210-24P2J is a 1U HUAWEI eKit rack switch with 24 Gigabit PoE+ ports on a 400W budget and two 2.5G SFP uplinks. It is sized for camera and Wi-Fi projects in schools, warehouses and commercial buildings.

====

The Huawei S210-24P2J is the switch you put in the rack when a camera or Wi-Fi project outgrows small desktop units. It packs 24 Gigabit PoE+ ports with a 400W budget and two 2.5G SFP slots into a 1U chassis, and the power supply is built in, so there are no adapters hanging behind the rack. It belongs to HUAWEI eKit, the line Huawei sells to small and medium businesses through its distribution partners.

Huawei S210-24P2J PoE capacity

Huawei gives two clear full-load figures: 24 devices at 15.4W each, or 13 devices at 30W. A school with 20 fixed cameras fits on one switch. A project that mixes cameras and access points needs a quick power calculation before you assign ports.

  • 24 GE RJ45 ports, all PoE+.
  • 2 SFP slots at 100M, 1G or 2.5G.
  • Maximum PoE power: 400W.
  • Maximum draw at full PoE load: 482.68W.

Built-in power with a wide input range

The internal supply accepts 90 to 290 V AC and also high-voltage DC from 190 to 290 V. With surge protection rated at ±6 kV, it handles sites where the mains supply is less stable, such as warehouses and light industrial buildings.

Cooling and rack mounting

Two built-in fans pull air in from the left and front and push it out to the right, so leave side clearance in the cabinet. The unit measures 43.6 x 442 x 220 mm, weighs 2.88 kg and mounts in a 19-inch rack, or on a desk or wall where there is no rack. The operating range is -5°C to +45°C, so in a Riyadh or Dammam summer it belongs in an air-conditioned network room.

Typical projects in Saudi Arabia

  • Schools: corridor and yard cameras plus classroom access points from one network room.
  • Warehouses: cameras on racks and gates, with a fiber link to the admin office over SFP.
  • Small malls and commercial centers: shop and parking cameras in one rack.
  • Hotels and residential buildings: access points on each floor and IP phones at reception.

Planning ports and watts

Start with a list of your devices and the draw of each one from its datasheet. For example, 16 fixed cameras at 8W use 128W and 4 access points at 20W use 80W, a total of 208W out of 400W, which leaves room for cameras you add later. Keep a sensible margin so the switch is not running at its limit all day. Reserve the two SFP slots for links to the router or an NVR in another room, and all 24 copper ports stay free for devices.

Compatibility

It powers any 802.3af or 802.3at device from Huawei or other brands, and the SFP slots take 1G or 2.5G modules. An NVR in the same rack can plug straight into one of the copper ports.

S210-24P2J, S220-24P4X or S210-8P2J?

The difference is the uplink and the port count. The S220-24P4X has the same 24 PoE+ ports and the same 400W budget, but four 10GE SFP+ uplinks instead of two 2.5G slots and a 128 Gbit/s switching capacity, so it suits networks that link to a core switch at 10G. The S210-8P2J is the smaller sibling with 8 ports, 128W and no fan.

Frequently Asked Questions

How many cameras can the Huawei S210-24P2J power?

Up to 24 cameras at 15.4W each, or 13 devices at 30W, within a 400W total PoE budget.

Can it be rack-mounted?

Yes. It is 1U high and 442 mm wide for a 19-inch rack, and it can also sit on a desk or mount on a wall.

Does it have fans?

Yes, two built-in fans. Air exits on the right side, so keep some side clearance in the rack.

Specifications

  • Model: S210-24P2J
  • Product line / series: HUAWEI eKit, S210 series
  • GE RJ45 ports: 24 x PoE+ (1G/100M/10M)
  • 2.5G SFP ports: 2 (2.5G/1G/100M)
  • PoE: Supported
  • Maximum PoE power: 400 W
  • PoE+ power interfaces: 24
  • Full-load ports at 30 W (802.3at): 13
  • Full-load ports at 15.4 W (802.3af): 24
  • Power supply mode: Built-in AC
  • Input voltage range: AC: 90 to 290 V, 45 to 65 Hz; high-voltage DC: 190 to 290 V
  • Rated input voltage: AC: 100 to 240 V, 50/60 Hz; high-voltage DC: 240 V
  • Surge protection: ±6 kV differential, ±6 kV common mode
  • Static power consumption: 15.74 W
  • Typical power consumption: 30.32 W
  • Maximum power consumption: Without PoE: 32.42 W; full PoE load: 482.68 W (400 W PoE)
  • Heat dissipation: Air cooling, 2 built-in fan modules
  • Airflow: Intake left and front, exhaust right
  • Chassis height: 1U
  • Dimensions without packaging (H x W x D): 43.6 x 442 x 220 mm (max depth 227 mm)
  • Weight without packaging: 2.88 kg
  • Installation: Rack, desk or wall mounting
  • Chassis material: Metal
  • Operating temperature: -5°C to +45°C at 0 to 1800 m altitude
  • Operating humidity: 5% to 95% RH, non-condensing
  • Certifications: EMC, safety, manufacturing

Features

  • 24 Gigabit PoE+ ports: power up to 24 devices from one switch instead of several small ones.
  • 400W budget: 24 devices at 15.4W or 13 devices at 30W at full load.
  • Built-in 90 to 290 V AC power supply: no external brick, and 190 to 290 V DC input is also accepted.
  • Two 2.5G SFP slots: fiber uplink to the server room or another building.
  • 1U metal chassis, 442 mm wide: fits a 19-inch rack, a desk or a wall.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌