DSPPA PL210 Dual 10-inch Passive Line Array Speaker, 650W

3276.44

Product description


The DSPPA PL210 is a passive full-range line array module with two 10-inch woofers and a 3-inch compression driver, rated at 650W with 120° by 10° coverage. Fly several in a column to cover large indoor halls and auditoriums evenly.

====

The DSPPA PL210 is a passive full-range module from the PL line array series, designed to be flown in columns that carry sound from the front row to the back of a large room. Each box holds two 10-inch woofers for lows and mids and a 3-inch compression driver for highs, rated at 650W. It is the right tool when a hall is too long for conventional box speakers to cover clearly.

DSPPA PL210 key specifications

From DSPPA's official product page and datasheet:

  • Drivers: 2 × 10-inch LF plus 1 × 3-inch (75 mm) HF compression driver.
  • Frequency response: 50Hz to 18kHz (±3dB).
  • Sensitivity: 100dB (±2). Maximum SPL: 128dB (±2).
  • Rated power: 650W at 8 ohms.
  • Coverage: 120° horizontal × 10° vertical.
  • Size: 303 × 740 × 437 mm. Net weight: 31 kg.

Why a line array for big rooms

A conventional box speaker spreads sound widely, so much of it bounces off the ceiling and floor and speech turns muddy in long halls. The PL210 opens to 120° horizontally but narrows vertical dispersion to just 10°. Fly several units with stepped splay angles and the column steers energy toward the seating; DSPPA describes the result as continuous coverage over long distances.

Full range from a single box

A built-in crossover network splits the signal between the woofers and the compression driver. With 100dB sensitivity, you reach a given level with less amplifier power than a less sensitive box would need. For speeches, lectures and background music, PL210 modules can run on their own. For concerts and events that need weight in the low end, add the PL210S subwoofer.

Where it fits in Saudi Arabia

  • Conference and ballroom spaces in hotels in Riyadh, Jeddah and Makkah.
  • University and large school auditoriums.
  • Large mosques with wide prayer halls where the khutbah must stay clear in the back rows.
  • Multi-purpose halls and indoor sports arenas.

Installation and system notes

The cabinet is professional-grade high-density plywood with a wear-resistant polyurea finish, and quick angle-adjustment hardware on both sides supports flying or stacking. DSPPA specifies it for indoor use. Because it is passive, you need an external professional amplifier rated for 8 ohms, and a processor is recommended when you pair it with a subwoofer.

PL210 or PL208, and when to add the PL210S?

The PL210 is the bigger module: dual 10-inch woofers, 650W, 50Hz low end, 128dB max SPL, 10° vertical coverage, 31 kg. The PL208 uses dual 8-inch woofers with a 1.75-inch HF driver, 400W, 70Hz low end, 124dB max SPL and 20° vertical coverage at 20.1 kg, which suits smaller rooms. If you need bass below 50Hz, add the PL210S (1 × 18-inch, 1000W, down to 43Hz); it is 740 mm wide, like the PL210.

Frequently Asked Questions

How many PL210 modules does my hall need?

It depends on room length and trim height. Each box covers 10° vertically and 120° horizontally, so a sound designer sizes the column from the venue drawing.

Does the DSPPA PL210 need an amplifier?

Yes. It is a passive 8-ohm module rated at 650W and needs an external professional amplifier.

Can I use the PL210 without a subwoofer?

For speech, lectures and light music, yes, since it reaches 50Hz. For concerts and bass-heavy content, add the PL210S, which goes down to 43Hz.

Specifications

  • Model: PL210
  • Type: Passive line array full-range speaker
  • System configuration: 2 × 10" LF, 1 × 3" HF (75 mm compression driver)
  • Crossover: Built-in precision crossover network
  • Frequency response (±3dB): 50Hz - 18kHz
  • Sensitivity: 100dB ±2dB
  • Max SPL: 128dB ±2dB
  • Input impedance: 8Ω
  • Rated power: 650W
  • Coverage (H × V): 120° × 10°
  • Dimensions (H × W × D): 303 × 740 × 437 mm
  • Net weight: 31 kg
  • Enclosure: Professional-grade high-density plywood with wear-resistant polyurea coating
  • Rigging: Quick angle-adjustment mechanisms on both sides for flying or stacking
  • Application: Indoor venues: auditoriums, multi-purpose halls

Features

  • Two 10-inch woofers plus a 75 mm (3-inch) compression driver: full range from 50Hz to 18kHz in one box.
  • 120° horizontal by 10° vertical coverage: spreads across the room width and keeps sound aimed at the audience when arrayed.
  • 650W rated power and 128dB (±2) max SPL: enough level for large halls and long throws.
  • 100dB (±2) sensitivity at 8 ohms: more output per amplifier watt than the PL208 (98dB).
  • Quick angle-adjustment hardware on both sides: fly or stack several units for continuous coverage.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌