DSPPA DSP915 20W Coaxial Ceiling Speaker with Power Tap
318.56ر.س
Product description
The DSPPA DSP915 is a 20W coaxial ceiling speaker with a 5" driver, a 1" tweeter and a built-in 70V/100V transformer, fitting a 170 mm ceiling cutout. It suits offices, shops, corridors and hotel rooms that need moderate-level background music and paging.
====
The DSPPA DSP915 is a 20W coaxial ceiling speaker that combines a 5-inch driver and a 1-inch tweeter in a single in-ceiling unit. A built-in 70V/100V transformer lets you run dozens of them on one line from a central amplifier. It is a practical speaker for offices, shops, corridors and hotel rooms, where you need quiet background music and clear paging rather than auditorium volume.
DSPPA DSP915 specifications
These values come from the official DSP915 datasheet:
- Rated power: 20W; 8Ω power: 20W.
- Drivers: 5" full-range plus 1".
- Frequency response: 60Hz to 20kHz.
- Sensitivity 90±2 dB, maximum SPL 103±2 dB.
- Cutout Ø170 mm, weight 2.9 kg.
Know your 70V and 100V taps
This detail is easy to miss. On a 100V line the taps are 6W, 10W and 20W. On a 70V line they drop to 3W, 6W and 10W. In other words, the full 20W is only available on a 100V system, which is the common standard in Saudi buildings. If your amplifier offers a 70V output only, plan on a 10W maximum per speaker.
Why a coaxial design matters
In a coaxial speaker the tweeter sits at the center of the main cone, so highs and lows leave from the same point. You get even sound directly below the speaker, which is what low-ceiling corridors and offices need. DSPPA notes a dual-crossover design and a surround with good damping and long service life.
Installing in a suspended ceiling
Cut a 170 mm hole in the ceiling tile and the speaker sits flush with the surface. Check you have enough depth above the tile. The white ABS housing resists deformation and matches the white ceilings found in most offices and shops.
How many ceiling speakers do you need?
In offices and corridors, the rule is more speakers at lower power rather than a few at high power. Along a long corridor, several speakers on the 6W tap sound more even than two at 20W. A small meeting room usually needs one or two. Ceiling height also matters: the higher the ceiling, the larger the floor area each speaker covers.
Where it fits in Saudi Arabia
- Offices and branches: background music and staff paging in corridors and small meeting rooms.
- Shops and pharmacies: low-level music and promotion announcements.
- Hotel rooms and corridors in Makkah and Madinah: paging and music along the floors.
- Schools: one speaker per classroom tied to the school PA system.
Amplifier compatibility
Any amplifier with a 100V or 70V output will drive it, such as the 250W DSPPA MP250UB. As an example, an office with 20 DSP915 speakers on the 10W tap totals 200W, within a 250W amplifier. The 8Ω terminal covers standard low-impedance amps when needed.
DSP915 or DSP926?
The DSP915 offers 20W, a 1" tweeter, response from 60Hz, 100V taps of 6W, 10W and 20W, a white ABS housing and 2.9 kg weight. The DSP926 doubles the power to 40W, uses a 0.75" tweeter, starts at 90Hz, reaches 107 dB versus 103 dB, and adds a metal back cover. Choose the DSP915 for offices and corridors, and the DSP926 for mosques, halls and larger stores.
Frequently Asked Questions
What power does the DSP915 give on a 70V line?
On 70V the taps are 3W, 6W and 10W. The full 20W is available on a 100V line or through the 8Ω terminal.
What cutout size does the DSP915 need?
A 170 mm diameter hole; the speaker mounts flush in a suspended ceiling.
Is the DSP915 a coaxial speaker?
Yes. It has a 5" full-range driver and a 1" tweeter on the same axis, with a dual-crossover design.
Specifications
- Model: DSP915
- Type: Coaxial in-ceiling speaker with built-in 70V/100V transformer
- Speaker units: 5" full-range ×1, 1" ×1
- Rated power: 20W
- 70V taps: 3W / 6W / 10W
- 100V taps: 6W / 10W / 20W
- 8Ω power: 20W
- Sensitivity (1m, 1W): 90±2 dB
- Max SPL (1m): 103±2 dB
- Frequency response: 60Hz-20kHz
- Crossover: Dual-crossover design
- Terminals: Switchable voltage (70V/100V) and 8Ω terminals
- Cutout size: Ø170 mm
- Weight: 2.9 kg
- Housing: White ABS engineering plastic
- Mounting: In-ceiling flush mount
Features
- 100V taps at 6W, 10W and 20W: choose the level for each room or corridor on one amplifier line.
- 5" driver with 1" tweeter: 60Hz-20kHz response for balanced background music.
- 170 mm cutout: clean flush mounting in suspended ceilings.
- Voltage and 8Ω terminals: works with a 100V amplifier or a standard amp at 20W.
- White ABS housing, 2.9 kg: light and suited to light-colored ceilings.
