DSPPA MAG6825 1U IP Network Amplifier, 250W 100V Output

2823.01

Product description


The DSPPA MAG6825 is a 1U IP network amplifier that receives paging and music from a DSPPA server over the LAN and drives 250W of 100V speakers. It fits a school building or a wing of a compound that needs one audio point within a central PA system.

====

The DSPPA MAG6825 is a 1U rack amplifier that pulls its audio straight off your data network and pushes 250W into a 100V speaker line. Instead of running dedicated audio cable from the control room to every building, you run one Ethernet drop from the nearest switch. It is a practical building block for schools, compounds and commercial sites that want one central PA server and a powered audio point in each block.

DSPPA MAG6825 key specifications

These figures come from DSPPA's official datasheet for the 1U MAG68 range:

  • Output: 250W, 100V constant-voltage, with amplifier efficiency above 90%.
  • Network: LAN1 and LAN2, TCP/IP at 100/10 Mbps with automatic failover.
  • Local playback: MP3 player with USB and Micro SD, up to 32GB each.
  • Inputs: AUX IN at 350mV, MIC IN at 5mV, plus a 1000mV AUX OUT.
  • Consumption: 340W from AC220V/50Hz.
  • Net weight: 4kg.

Two network links, one uninterrupted program

Plug each LAN port into a different switch. If a cable is cut or a switch goes down, the amplifier detects the fault and carries on over the other link. The unit also works across network segments, so it does not need to live in the same room as the server.

Offline scheduling and local sources

Timing points programmed on the server are stored on the SD card. If the network drops, the MAG6825 still plays bells and scheduled programs on time. The front display shows the clock and playback progress, and the internal clock stays synchronized with the host. Staff can also play a file from a USB stick or connect a microphone for a local announcement.

Priorities, emergency output and expansion

Audio is handled in three tiers: background music, business broadcasts and emergency messages, with higher tiers taking over automatically. On the back you get an EMC override output (24V plus a dry contact), a 100V input for a backup amplifier, and an expansion port for accessories such as an intercom panel, an on-demand screen, a wireless remote or Bluetooth. Over-current, overheat and over-voltage protection plus a watchdog keep it running.

Typical projects in Saudi Arabia

  • Schools: one unit per building or wing, with bells and morning assembly run from a single server.
  • Malls and retail centers: background music in corridors that steps aside for public announcements.
  • Hotels and serviced apartments: corridor and lobby coverage over one or two floors.
  • Warehouses and factories: shift start and end announcements over horn speakers.

Compatibility

DSPPA lists the MAG6825 among the rack amplifiers of its MAG6000 IP network PA system. It takes audio and commands from the system host. It works with any standard network switch and with all kinds of 100V speakers, from ceiling and wall units to columns and horns, as long as the total speaker load stays within 250W.

MAG6825 or MAG6835?

Both share the same 1U chassis, the same inputs and outputs and the same 4kg net weight. Only power differs: the MAG6825 delivers 250W and draws 340W, while the MAG6835 delivers 350W and draws 440W. Add up your speaker taps; if the total gets close to 250W, step up to the MAG6835 to leave room for growth.

Frequently Asked Questions

Does the DSPPA MAG6825 need an audio cable from the control room?

No. It receives audio over an Ethernet cable from the nearest switch and drives speakers on a 100V line.

What happens if the network goes down?

It keeps playing bells and scheduled programs stored on the SD card, and fails over to the second LAN port if connected.

How many speakers can it drive?

The total of all speaker taps must stay within 250W. For example, 40 ceiling speakers tapped at 6W add up to 240W.

Specifications

  • Model: MAG6825
  • Type: 1U rack IP network amplifier (MAG6000 system)
  • Rated output: 250W, 100V constant-voltage output
  • Amplifier efficiency: Above 90%
  • Network: LAN1 and LAN2, TCP/IP 100/10 Mbps auto-adaptive, dual-network redundancy with line fault detection and automatic switching
  • AUX IN: Sensitivity 350mV ±50mV, 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥77dB
  • AUX OUT: 1000mV ±100mV, 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥75dB
  • MIC IN: Sensitivity 5mV ±1mV, 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥71dB
  • USB/SD/NET playback (MP3): 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥77dB
  • 100V output: 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥77dB
  • SD card / USB drive capacity: Up to 32GB each (Micro SD slot, USB port)
  • Rear panel: LAN1/LAN2, AUX IN, AUX OUT, MIC input, USB, Micro SD, 100V OUT, EMC override output (24V and dry contact), 100V backup input, expansion port, fan port, power inlet with fuse holder
  • Front panel: Digital display (clock and playback progress), IR receiver window, Power/Net/Timing/Signal/CLIP/PROT LEDs, 8 control buttons
  • Protection: Over-current, overheat, over-voltage; watchdog function
  • Rated power consumption: 340W
  • Power supply: AC220V/50Hz
  • Net weight: 4kg

Features

  • 250W on a 100V line: drives a full building of ceiling and wall speakers at over 90% efficiency.
  • Dual LAN redundancy (LAN1/LAN2): if a cable or switch fails, the unit moves to the second link on its own.
  • Offline schedule stored on SD: bells and timed programs keep running if the link to the server is lost.
  • Built-in MP3 player with USB and Micro SD (up to 32GB each): play local files without the control room.
  • EMC override output with 24V and dry contact: a host-controlled signal for emergency broadcast accessories.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌