DSPPA PAVA9500E 8-Zone 500W Expansion Amplifier for PAVA9500
7345.57ر.س
Product description
The DSPPA PAVA9500E adds 8 zones, 500W and a standby amplifier to a PAVA9500 voice alarm system. It links to the host over a CAN bus and suits malls, hotels and office complexes that need more than the host's 8 zones.
====
The DSPPA PAVA9500E expands a PAVA9500 voice alarm system by 8 zones at a time, with 500W on 100V lines and its own standby amplifier. It is not a standalone amplifier: it connects to the PAVA9500 host through two RJ45 CAN bus ports and receives emergency audio, paging and background music from it, then drives its own speaker zones. Add it when the host's 8 zones are full and the building needs more floors or wings covered.
What the DSPPA PAVA9500E adds
Each unit brings 8 more zones, and one host takes up to 19 of them. DSPPA rates the full system at 160 zones including the host.
- 8 A/B speaker outputs, each with independent on/off and volume.
- Two 500W digital amplifiers (duty and standby) with automatic changeover and amplifier fault detection.
- 500W total output shared across the 8 zones.
- Master volume plus treble and bass controls.
Built-in local message player
The unit has its own alarm and message player with 4MB of MP3 storage for up to 10 program sources. Files are swapped over Micro USB, and trigger inputs are set up in the PC sub-control software. That lets you wire an alarm signal straight into this unit's inputs as well as relying on audio from the host.
How the unit prioritizes audio
When several signals arrive together, the PAVA9500E plays them in this order:
- Emergency audio from the host bus (EMC mic, EVAC or ALERT message).
- Fire alarm dry-contact trigger.
- Background music from the host bus.
- The 6 external inputs.
Remote paging goes to the selected zones while music continues in the others.
Inputs, outputs and supervision
- 2 mic inputs, 4 line inputs and 1 line output.
- 8 trigger inputs (dry contact or 3.3-24V level) and 8 programmable dry-contact outputs.
- 8 24V override outputs at 0.2A per channel, 38W total maximum.
- Speaker line monitoring for open circuit, short circuit and ground fault.
- 5-bit DIP switch addressing, with bus termination enabled on the last unit.
- AC 220-240V and DC 24V/17A supplies with automatic changeover.
Where it fits in Saudi projects
- Multi-level malls: one unit per floor or wing, all controlled from a single host in the control room.
- Hotels in Makkah and Madinah: separate zones for corridors, restaurants and lobbies with independent paging.
- Office complexes: add zones as new floors are fitted out, without replacing the host.
PAVA9500E, PAVA9500 or PAVA9425E?
The PAVA9500E matches the PAVA9500 host in chassis and zone count (8 zones) but has no EMC microphone. The PAVA9425E adds only 4 zones but with 1000W, and a host accepts up to 30 of them. Pick the PAVA9500E for many zones with few speakers each, and the PAVA9425E when a single zone carries a heavy speaker load.
Frequently Asked Questions
Does the PAVA9500E work without a host?
No. It is an expansion unit that runs under a PAVA9500 host and receives emergency audio, paging and music over the CAN bus.
How many PAVA9500E units can I add?
Up to 19 on one host, for a 160-zone system according to DSPPA. Each unit can sit up to 600 m from the host.
Can I mix PAVA9500E and PAVA9425E units?
Yes. DSPPA states the PAVA9500E can be combined with the PAVA9425E under the same host, so you can mix 500W and 1000W zones.
Specifications
- Model: PAVA9500E
- Type: 8-zone expansion amplifier with main/backup switching
- Compatible host: PAVA9500 (can be combined with PAVA9425E)
- Chassis: 2U, black oxidized aluminum alloy, frosted panel
- Rated output power: ≥500W (100V), shared across 8 zones
- Amplifiers: 2 x 500W digital amplifiers (main and backup), automatic changeover
- Zones: 8 zones, A/B outputs, independent on/off and volume per zone
- Input sensitivity: MIC: 5±0.5mV, 10kΩ; LINE: 1000±100mV, 10kΩ
- Harmonic distortion: MIC: 1% @1kHz; LINE: <1% @1kHz
- Frequency response: LINE: 50Hz-18kHz (±3dB)
- S/N ratio: LINE: >80dB (A)
- Line auxiliary output: 1000mV, 80Hz-15kHz (±3dB), <1% @1kHz
- Audio I/O: 2 mic inputs, 4 line inputs, 1 line output
- Local message player: 4MB MP3 storage, up to 10 sources, updated via Micro USB
- Control I/O: 8 dry-contact or level (3.3-24V) inputs, 8 programmable dry-contact outputs
- 24V outputs: 8 outputs, 0.2A each, 38W total maximum
- System contacts: System fault relay output, emergency mode relay output, fire reset input (t≥0.5s), AC/BAT/FAULT contact outputs
- Host link: 2 x RJ45 CAN bus, cascade or loop, up to 600 m
- Addressing: 5-bit DIP address; bus termination on the last unit
- Maximum per host: 19 units (160 zones including host)
- Line supervision: Open, short and ground fault detection
- Power supply: AC 220-240V, 50-60Hz; DC 24V/17A, automatic changeover
- Unit dimensions (LxWxH): 483 x 430 x 88 mm
- Net weight: 11.75 kg
Features
- 8 extra zones per unit: up to 19 units on one host for a 160-zone system.
- Two 500W amplifiers with automatic changeover: the standby takes over on a fault, with amplifier fault detection.
- 4MB local message player: stores up to 10 MP3 sources, updated over Micro USB.
- 8 trigger inputs, 8 dry-contact outputs and 8 24V outputs: tie this unit's zones to the fire panel and volume overrides.
- Speaker line supervision: open, short and ground fault detection on every zone.
