DSPPA DSP2603 40W 6.5-inch Wall Mount Speaker with 100V Taps

384.04

Product description


The DSPPA DSP2603 is a 40W two-way wall speaker with a 6.5-inch woofer, a 1-inch tweeter and response down to 65Hz. It is built for bigger spaces such as gyms, warehouses, event halls and prayer rooms, on 70V/100V lines or at 8 ohms.

====

Big rooms with high ceilings need a speaker with a larger woofer and more power, which is where the DSPPA DSP2603 comes in. It is a 40W two-way wall speaker with a 6.5-inch woofer and a 1-inch tweeter, reaching down to 65Hz. It runs on 70V or 100V lines through a range of taps, or at 8 ohms from a conventional amplifier, so it suits both large PA systems and small standalone rooms.

DSPPA DSP2603 specifications

  • Power: 40W RMS, 40W at 8 ohms.
  • 70V taps: 40W, 20W, 10W, 5W and 2.5W.
  • 100V taps: 40W, 20W, 10W and 5W.
  • Frequency response: 65Hz to 20kHz.
  • Sensitivity 91±2dB, maximum SPL 106±2dB.
  • Weight: 3.7kg.

A 6.5-inch woofer for fuller sound

You hear the difference straight away: the bigger woofer gives background music and a speaker's voice a depth that small boxes cannot. With 91±2dB sensitivity, it gets loud on a moderate amount of amplifier power. The cabinet is injection-moulded plastic behind an aluminium mesh grille with a streamlined shape, and DSPPA says the design is patented.

Taps from 2.5W upward

Not every speaker in a hall sits the same distance from the audience. A unit near the stage may need only 5W or 10W, while one at the back wall needs 20W or 40W. Set each speaker's tap individually and the level stays even across the room without turning the whole amplifier up.

Example layout for a gym

For a gym of roughly 30 × 20 metres, start with six speakers, three on each long wall, on the 20W tap. That totals 120W, so a 250W amplifier leaves room to raise the far corners to 40W if needed. Mount them at the same height and aim them toward the middle of the floor. Treat this as a starting point and fine-tune on site.

Where it fits in Saudi Arabia

  • Gyms and sports clubs: workout music and announcements over equipment noise.
  • Warehouses and indoor factory halls: staff paging across large floors.
  • Event and wedding halls: music and speeches with real body.
  • Prayer rooms in compounds and offices: the imam's voice clear to the back rows.
  • Large restaurants and showrooms: background music with audible bass.

Installation and compatibility

At 3.7kg it needs a solid wall and proper fixings. Wire it to a 100V or 70V amplifier on the same line as your ceiling speakers, or at 8 ohms for a small system. The official name calls it waterproof, but no IP rating is published, so indoor or covered locations are the safer choice.

DSP2603 or DSP2601B?

Same family and the same tap concept, but the DSP2603 is the bigger model: a 6.5-inch woofer instead of 4-inch, 40W instead of 20W, response from 65Hz rather than 95Hz, 106±2dB maximum SPL against 103±2dB, and 3.7kg against 2.3kg. Choose the DSP2603 for halls and large spaces, the DSP2601B for classrooms and offices. For open yards in full sun, the aluminium-bodied DSP255IIB column speaker remains the better fit.

Frequently Asked Questions

How many DSP2603 speakers does a medium hall need?

It depends on size, height and noise. A medium hall typically starts with two to four on the long walls, with taps adjusted on site.

Can I run it from a normal amplifier without a 100V line?

Yes. It has an 8 ohm input rated 40W and connects straight to a low-impedance amplifier.

How does the DSP2603 differ from the DSP2601B?

The DSP2603 has a 6.5-inch woofer, 40W and response from 65Hz; the DSP2601B has a 4-inch woofer, 20W and response from 95Hz.

Specifications

  • Model: DSP2603
  • Type: 2-way wall mount speaker with power taps
  • Drivers: 1 × 6.5-inch woofer + 1 × 1-inch tweeter
  • Working voltage: 100V (built-in 70V/100V transformer)
  • Rated power (RMS): 40W
  • 70V taps: 40W, 20W, 10W, 5W, 2.5W
  • 100V taps: 40W, 20W, 10W, 5W
  • 8Ω power: 40W
  • Frequency response: 65Hz to 20kHz
  • Sensitivity (1W/1m): 91±2dB
  • Max SPL (1m): 106±2dB
  • Net weight: 3.7kg
  • Material: Injection-moulded plastic cabinet, aluminium mesh grille

Features

  • 40W with 106±2dB maximum SPL: cover a hall or warehouse with fewer speakers.
  • 6.5-inch woofer and 65Hz to 20kHz response: fuller music and a weightier speaking voice.
  • Five 70V taps (40/20/10/5/2.5W) and four 100V taps (40/20/10/5W): tune each unit to its distance from the audience.
  • 8 ohm input rated 40W: runs from a conventional amplifier in smaller rooms without a 100V line.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌