Huawei S310-48P4X 48-Port PoE+ Switch with 4x 10G SFP+ Uplinks
4452.80ر.س
Product description
The Huawei S310-48P4X is a managed HUAWEI eKit S310 switch with 48 gigabit PoE+ ports (up to 30 W per port, 380 W total), four 10G SFP+ uplinks and a built-in power supply. It is a practical fit for an office floor or branch that puts PCs, phones and access points on one switch.
====
The Huawei S310-48P4X is the switch you put on a full office floor or in a mid-sized branch: 48 gigabit PoE+ ports, four 10G SFP+ uplinks and a built-in power supply in a 1U chassis only 220 mm deep. Each port delivers up to 30 W from a 380 W total budget, which suits a mix of IP phones, access points and a few cameras alongside PCs that need no power at all. It comes from the S310 series under HUAWEI eKit, a Huawei sub-brand dedicated to the distribution channel and small and medium-sized businesses, rather than the CloudEngine line built for large enterprise campuses.
Huawei S310-48P4X specifications
These figures come from the official hardware description and the series datasheet:
- 48x 10/100/1000BASE-T ports, all PoE+ at up to 30 W each.
- 380 W total PoE budget.
- 4x 10GE SFP+ ports that also run at 1000 Mbps.
- 176 Gbit/s switching capacity, 131 Mpps forwarding rate.
- 2 GB RAM and 1 GB flash.
How far does 380 W go?
A desk IP phone usually draws between 3 and 7 W, so every port could power a phone. Add access points at 15 to 25 W each and you need to plan: around 30 phones plus 8 APs will sit inside 380 W in most cases. Check the real figures on your devices' datasheets before you finalize the plan.
Built for branches and small racks
At 220 mm deep and 3.24 kg, it fits the small wall cabinets found in most branches and shops. Two smart-speed fans keep noise to 37.3 dB(A) sound pressure, quiet enough near desks. Huawei quotes an MTBF of 48.14 years and ±7 kV surge protection on the service ports.
Management and security
Manage it from the cloud with the HUAWEI eKit app, or locally via web, SNMP and SSH; a CLOUD LED on the front shows the cloud connection status. Per the series datasheet you also get 4094 VLANs including voice VLAN for phones, 802.1X and DHCP snooping. Holding the RST button for 6 seconds restores factory settings.
Where it fits in Saudi Arabia
- Corporate floors in Riyadh needing 40 to 48 network points.
- Bank, insurance and clinic branches in Jeddah and Dammam.
- Schools with admin phones, corridor access points and a few cameras.
- Hotels running room phones and access points on a single floor.
A note on power
The power supply is built in and not replaceable, with no redundant supply or RPS input.
S310-48P4X or S310-48HP4X?
Ports and switching capacity are identical. The difference is the PoE budget: 380 W here against 846 W on the 48HP4X. As a result the 48P4X is lighter (4.29 vs 8.04 kg packed), shallower (220 vs 420 mm) and quieter. Choose the 48P4X for offices that are mostly PCs and phones, and the 48HP4X for projects that are mostly cameras and access points.
Frequently Asked Questions
How many watts per port does the Huawei S310-48P4X provide?
Up to 30 W per port, with a 380 W total budget shared across the 48 ports.
Does it support a redundant power supply?
No. The supply is built in and non-pluggable, with no redundancy or RPS support, per Huawei's hardware description.
Do the SFP+ ports work with 1G modules?
Yes. The four 10GE SFP+ ports auto-sense down to 1000 Mbps.
Specifications
- Model: S310-48P4X (part number 98012385)
- Series: HUAWEI eKit S310 (eKitEngine)
- First supported version: V600R023C00
- Downlink ports: 48x 10/100/1000BASE-T RJ45, PoE+
- Uplink ports: 4x 10GE SFP+ (auto-sensing to 1000 Mbps)
- Management ports: 1x RJ45 console; no ETH management port, no USB
- Switching capacity: 176 Gbit/s
- Packet forwarding rate: 131 Mpps
- PoE: All 48 ports, up to 30 W per port, 380 W total
- Power supply: Built-in AC, non-pluggable, no redundancy or RPS
- Input voltage: 100-240 V AC 50/60 Hz or 240 V HVDC; range 90-290 V AC or 190-290 V DC; max current 6 A
- Power consumption: Static 34.04 W, typical 49.44 W, max without PoE 64.7 W, max at full PoE 462.8 W
- Heat dissipation: Typical 168.69 BTU/h, max without PoE 220.76 BTU/h, max with PoE 1579.12 BTU/h
- Cooling: 2 built-in fans, smart speed control, left-to-right airflow
- Noise: 49.3 dB(A) sound power, 37.3 dB(A) sound pressure
- Dimensions (H x W x D): 43.6 x 442 x 220 mm (227 mm max depth), 1U
- Weight: 3.24 kg unpacked
- Memory: 2 GB RAM, 1 GB flash
- Operating temperature: -5 to 50°C at 0-1800 m (no cold start below 0°C; 45°C max with 60 km+ optics)
- Storage temperature: -40 to 70°C
- Humidity: 5-95% RH, non-condensing
- Altitude: Up to 5000 m
- Ingress protection: IP20
- Surge protection: Service ports ±7 kV common mode; power ±6 kV differential and common mode
- Reliability: MTBF 48.14 years, availability above 0.99999
- Indicators and buttons: PWR, SYS, MST, PoE, CLOUD LEDs; MODE and RST buttons (6 s for factory reset)
- Stacking: iStack
- MAC address table: Up to 16K (series value)
- VLANs: 4094, voice VLAN, MUX VLAN
- Loop prevention and reliability: STP/RSTP/MSTP, ERPS (G.8032), Smart Link, LACP, VRRP, BFD, LLDP
- Security: 802.1X, MAC authentication, AAA/RADIUS/HWTACACS, DHCP snooping, ARP and DoS defense, port isolation, SSHv2, HTTPS
- QoS: 8 queues per port, SP/DRR scheduling, port rate limiting, 802.1p and DSCP remarking
- Management: Cloud management via HUAWEI eKit app or on-premise (web, SNMPv1/v2/v3, Telnet, SSH, RMON), VCT cable test, port mirroring, 802.3az EEE
Features
- 48 gigabit PoE+ ports, up to 30 W each: phones and access points run off the network cable, no adapters.
- 380 W PoE budget: enough for a mix of phones and access points.
- 4x 10GE SFP+ ports that also run at 1G: a fast core link now, and compatibility with existing 1G optics.
- Only 220 mm deep and 3.24 kg: fits shallow wall cabinets in branch offices.
- 48.14-year MTBF and 7 kV surge protection on service ports: years of stable operation.
