Huawei S220-48P4X 48-Port PoE+ Switch with 4x 10GE SFP+

2907.20

Product description


The Huawei S220-48P4X is a Layer 2 managed switch from the eKitEngine line for small and mid-sized businesses, with 48 Gigabit PoE+ ports, a 380W PoE budget and four 10GE SFP+ uplinks. It fits warehouses, hotels and schools that need to run dozens of cameras, access points and phones from a single switch.

====

The Huawei S220-48P4X is a 48-port Layer 2 managed PoE+ switch from the eKitEngine family, the line Huawei builds for small and mid-sized businesses. It packs 48 Gigabit PoE+ ports and four 10GE SFP+ uplinks into a single 1U chassis. If one floor of your building has dozens of cameras, access points and desk phones, this switch can run all of them.

Huawei S220-48P4X specifications

Figures below come from Huawei's official S220 series datasheet:

  • 48x 10/100/1000BASE-T ports, all PoE+.
  • 4x 10GE SFP+ uplink ports.
  • 380W total PoE budget.
  • 176 Gbps switching capacity, 131 Mpps forwarding rate.
  • 16K MAC address table, 4094 VLANs.
  • Built-in AC power supply, 43.6 x 442 x 220 mm.

Planning a 380W PoE budget across 48 ports

Check this number before you order. The S220-48P4X shares 380W of PoE across its ports, slightly less than the 400W on the 24-port S220-24P4X. With all 48 ports loaded, the average works out to roughly 7.9W per port. Add up the real draw of each device from its own datasheet, and pay extra attention to large access points and PTZ cameras.

Huawei lists two power features for the PoE models in this series. Fast PoE starts powering devices within seconds of the switch turning on. Perpetual PoE keeps cameras and APs running while the switch itself restarts, for example during a firmware upgrade.

10G uplinks and ring protection

Put 48 devices on one switch and the uplink becomes the bottleneck. Four 10GE SFP+ ports give you serious capacity toward the server room, and LACP lets you bundle them for more bandwidth and a backup path. For ring topologies the switch supports STP, RSTP, MSTP and ERPS (G.8032), which Huawei says delivers millisecond-level failover.

Management and security for IT teams

You can manage it through the web interface, CLI, SNMP v1/v2c/v3 or SSHv2, or from the cloud with the HUAWEI eKit app. Security features include 802.1X, MAC authentication, DHCP snooping, IP/MAC/port/VLAN binding, port isolation and DoS and ARP attack defense. A built-in virtual cable test helps locate cabling faults remotely, and port mirroring copies traffic for analysis.

Typical deployments in Saudi Arabia

  • Warehouses and factories: dozens of CCTV cameras on one switch.
  • Hotels and serviced apartments: a full floor of APs and room phones.
  • Schools: corridor cameras plus classroom Wi-Fi.
  • Offices in Riyadh or Jeddah: IP phones, cameras and APs for one floor.

S220-48P4X vs S220-24P4X vs S220S-24P4JX

The S220-24P4X is the 24-port model in the same series: 24 PoE+ ports, four 10G uplinks, a 400W budget, 128 Gbps and 95 Mpps. Choose it for 24 devices or fewer that draw more power each. The S220S-24P4JX belongs to the S220S series: 24 PoE+ ports and 400W, but its uplinks are two 10G plus two 2.5G SFP ports, capacity is 98 Gbps and 73 Mpps, and it is rated to 40°C instead of 50°C. Pick the S220-48P4X when you need more than 24 PoE ports in a single unit.

Frequently Asked Questions

How much PoE power does the Huawei S220-48P4X provide?

It has a 380W total PoE budget shared across 48 PoE+ ports, about 7.9W per port on average if every port is loaded, so total your devices' draw first.

Is the S220-48P4X a managed switch?

Yes. It is a Layer 2 managed switch you can run through the web UI, CLI, SNMP or SSH, or from the cloud using the HUAWEI eKit app.

What uplink ports does the S220-48P4X have?

Four 10GE SFP+ ports. Each one needs a compatible SFP+ transceiver or DAC cable to connect to your core switch or server.

Specifications

  • Model: S220-48P4X
  • Series: Huawei eKitEngine S220 (Layer 2 managed switches for SOHO and SMB)
  • Downlink ports: 48x 10/100/1000BASE-T, PoE+
  • Uplink ports: 4x 10GE SFP+
  • PoE budget: 380 W
  • PoE features: Fast PoE, Perpetual PoE
  • Switching capacity: 176 Gbps
  • Packet forwarding rate: 131 Mpps
  • MAC address table: 16K
  • VLANs: 4094, plus voice VLAN and VLAN stacking
  • Ring and loop protection: STP, RSTP, MSTP, ERPS (G.8032), loop and root protection, BPDU tunneling
  • Multicast: IGMP v1/v2/v3 and IGMP snooping
  • Link aggregation and discovery: LACP, LLDP
  • QoS and ACL: Rate limiting, 8 queues per port, IPv4/IPv6 ACLs
  • Security: 802.1X, MAC authentication, DHCP snooping, IP/MAC/port/VLAN binding, port isolation, DoS/ARP/ICMP defense, AAA/RADIUS/TACACS, SSHv2, HTTPS
  • Management: Web, CLI, SNMP v1/v2c/v3, SSHv2, cloud management via HUAWEI eKit app (NETCONF/YANG)
  • Maintenance tools: Virtual cable test, port mirroring, logs and alarms, EEE, online upgrade
  • Power supply: Built-in AC
  • Input voltage: Rated 100-240 V AC, 50/60 Hz; range 90-290 V AC, 45-65 Hz
  • Maximum power consumption: 64.7 W without PoE; 462.8 W at full PoE load (380 W)
  • Surge protection: Service ports: ±7 kV common mode; power port: ±6 kV differential and common mode
  • Cooling: Air cooling with intelligent fan speed control
  • Noise (sound power): 46.6 dB(A) at normal temperature; 54.3 dB(A) at high temperature
  • Dimensions (H x W x D): 43.6 x 442 x 220 mm (1U)
  • Operating temperature: -5°C to +50°C
  • Storage temperature: -40°C to +70°C
  • Humidity: 5% to 95% RH, non-condensing

Features

  • 48 Gigabit PoE+ ports in 1U: one switch covers a full floor instead of two 24-port units.
  • 4x 10GE SFP+ uplinks: plenty of bandwidth to carry camera footage and Wi-Fi traffic to the server room.
  • 176 Gbps switching capacity and 131 Mpps forwarding: all ports run at line rate together.
  • 380W PoE budget with Fast PoE and Perpetual PoE: cameras stay powered while the switch reboots.
  • Web, CLI, SNMP v1/v2c/v3 and HUAWEI eKit app management: suits IT teams and remote monitoring.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌