DSPPA DW2235 Wi-Fi Ceiling Speaker with Built-in Amp and BT 5.0

1962.83

Product description


The DSPPA DW2235 is an active 6.5-inch ceiling speaker with a built-in digital amp (35W bass plus 15W treble per channel) that plays from Wi-Fi, Bluetooth 5.0 or AUX. It suits villas, cafes and waiting rooms that want ceiling background music without a separate amplifier.

====

The DSPPA DW2235 is an active 6.5-inch ceiling speaker with its own digital amplifier, Wi-Fi receiver and Bluetooth, so there is no separate amplifier or rack player to buy. Stream music from your phone or straight from online services, then wire a slave speaker to the master to get true stereo from two ceiling positions. It fits villa majlis rooms and living areas, cafes, and clinic waiting rooms across Saudi Arabia.

DSPPA DW2235 key specifications

DSPPA lists for the master unit:

  • Full digital amplifier: 35W low-frequency at 4Ω and 15W high-frequency at 8Ω, on each of the two channels.
  • 6.5-inch Kevlar bass cone with rubber surround, plus a 1-inch aluminium dome tweeter with an EOS waveguide.
  • Frequency response: 60 to 2,500Hz (LF) and 3,000 to 20,000Hz (HF).
  • Signal-to-noise ratio of at least 85dB, THD+N below 0.9%.
  • Size: 23cm diameter, 10.5cm deep. Power input: 24V/4.16A.

Wi-Fi, Bluetooth and line-in sources

The speaker joins a 2.4GHz 802.11 b/g/n Wi-Fi network or a wired LAN through its RJ45 port. Without a network, Bluetooth 5.0 reaches about 15 meters and supports AAC and FLAC. A 3.5mm AUX input takes a TV or an external player, and the Mode button switches between Wi-Fi, Bluetooth and AUX.

Supported protocols include Spotify Connect, AirPlay, QPlay, DLNA and UPnP. The free 4Stream app for iOS and Android brings in Spotify, Deezer, Tidal, Qobuz, Amazon Music, TuneIn, iHeartRadio and more, and it can also play files stored on a NAS. EQ is adjusted in the app.

Stereo pairs and multiroom playback

A Stereo/Mono switch sits on the master. In Stereo, the master plays the right channel and the slave plays the left. In Mono, both speakers carry the full left-plus-right mix, which works better when the two are far apart or in separate rooms. With several units on one network, each room plays its own source or all rooms play one track in sync. DSPPA also pushes free firmware updates online.

Where the DW2235 works best in KSA

  • Villa majlis and family lounges: play Quran recitation or nasheeds from a phone with no visible cabling.
  • Cafes and small restaurants: background music controlled from a phone at the counter.
  • Clinic waiting areas and showrooms: low-level sound spread evenly from the ceiling.
  • Istirahas: a pair of speakers in the indoor seating area running on the existing router.

Installation and power

The speaker goes into a false ceiling. Plan a 24V/4.16A power source near the master and a speaker cable from master to slave.

DW2235, DW2230 or an M2 kit?

The DW2230 belongs to the same Wi-Fi ceiling range but is powered by a PoE++ (802.3bt) switch at 30W×2, or 50W×2 with an optional 24V/5A supply, and needs a Φ205mm cut-out. Pick it if a network cable already reaches the ceiling. The DW2235 runs from a 24V supply and uses separate amplifiers for bass and treble. For a simpler setup with no network at all, the M2B, M2U and M2W kits pair a DM835 2×10W wall amplifier with two passive ceiling speakers, plus FM radio and SD playback.

Frequently Asked Questions

Does the DW2235 need an amplifier?

No. It has a built-in digital amp, 35W bass and 15W treble per channel. It only needs a 24V/4.16A power supply.

Does it work without internet?

Yes, over Bluetooth 5.0 (up to 15 m) or the AUX input. Streaming services such as Spotify need a network connection.

How do I get stereo sound?

Wire a slave speaker to the master's speaker output and set the switch to Stereo: the master plays right, the slave plays left.

Specifications

  • Model: DW2235
  • Type: 2-way stereo active Wi-Fi & Bluetooth ceiling speaker
  • Master speaker: Stereo set / Mono
  • Power supply: 24V/4.16A
  • Audio input: AUX (3.5mm), max 1V RMS
  • Bluetooth: 5.0, AAC, FLAC, up to 15 m
  • Audio output: Speaker out (to slave)
  • Wi-Fi: 2.4GHz, 802.11 b/g/n, 1T1R
  • Wi-Fi frequency: 2.412 - 2.484GHz
  • Transmit power: 802.11b +20dBm, 802.11g +18dBm, 802.11n +15dBm (max)
  • Receive sensitivity: 802.11b -89dBm, 802.11g -81dBm, 802.11n -71dBm
  • LAN: RJ45
  • Stereo/Mono switch: Stereo: master right, slave left; Mono: L+R on both
  • Mode button: Switches WiFi / BT / AUX
  • Bass driver: 6.5-inch Kevlar cone, rubber overhang
  • Tweeter: 1-inch aluminium dome, EOS waveguide
  • Sensitivity: Bass 86±3dB, tweeter 89±3dB
  • Amplifier power: LF 4Ω 35W × 2; HF 8Ω 15W × 2
  • Frequency response: LF 60 - 2500Hz; HF 3000 - 20000Hz
  • Signal-to-noise ratio: ≥85dB
  • THD+N: <0.9%
  • Crosstalk: >55dB
  • Size: 23cm diameter, 10.5cm deep
  • Slave speaker: Audio in and speaker out; same drivers, sensitivity and size as master
  • App: Free 4Stream app for iOS and Android
  • Streaming protocols: Spotify Connect, AirPlay, QPlay, DLNA, UPnP
  • EQ: Via app

Features

  • Built-in 35W LF + 15W HF per channel amp: no separate amplifier or rack required.
  • 2.4GHz Wi-Fi, RJ45 LAN and Bluetooth 5.0 up to 15 m: play from your phone with or without a network.
  • Spotify Connect, AirPlay, DLNA and the free 4Stream app: all streaming services in one place.
  • Stereo/Mono switch with one slave speaker: true stereo from two ceiling positions.
  • Synced multiroom playback: the same track in every room, or a different source per room.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌