DSPPA D6239 Conference Microphone Power Extender, 350W, 4 Outputs
695.59ر.س
Product description
The DSPPA D6239 feeds extra power, up to 350W at DC 24V, to chairman and delegate units in a D62 conference system through four 8-pin DCN outputs. It is meant for large halls where the microphone count or cable runs push past what the host alone should carry.
====
The DSPPA D6239 is a power extender for the D62 conference microphone system. It adds a fresh supply of up to 350W at DC 24V to chairman and delegate units and, according to DSPPA, boosts the signal reaching them. One 8-pin DCN line comes in from the host and leaves on four outputs, each feeding its own microphone chain. Add it when a hall has many seats, or when the tables sit far from the equipment room.
DSPPA D6239 specifications
DSPPA publishes only a handful of figures for this unit, and they explain its job clearly:
- Output: 350W at DC 24V.
- Input port: one 8-pin DCN socket marked UNIT, fed from the host.
- Output ports: four 8-pin DCN sockets marked DELEGATES.
Why a conference system needs extra power
D62 microphones have no power plug of their own. Each chairman or delegate unit, such as the D6221 or D6222, draws up to 2W at 24V from the host. The D6201C host lists an output of up to 110W shared across its three unit outputs. Long chains with many units and long cable runs move the system toward that limit, and the units at the far end are the first to suffer.
The D6239 sits partway along the run. Every microphone after it takes power from the extender rather than from the host.
Wiring it into the room
A cable from a host output goes into the UNIT port on the D6239. The four DELEGATES ports then carry microphone chains out to different parts of the hall. DSPPA lists the D6266 dual-male cable for the host-to-power-extender link, while D6260 and D6263 extension cables run between the microphones themselves.
Typical Saudi installations
- Council chambers in government bodies and chambers of commerce, with long rows of delegate seats.
- Conference halls in Riyadh, Jeddah and Makkah hotels, where table islands sit far from the rack.
- University and college boardrooms that start small and add seats with each expansion.
- Large meeting rooms in hospitals and multi-branch companies.
Before you order
Have three numbers ready: how many chairman and delegate units, the distance from the equipment room to the farthest table, and the table layout. With those, your installer can decide how many D6239 units you need and where each one goes.
How the D6239 differs from the other D62 accessories
- D6239: the only item that plugs into mains and adds power, 350W at 24V over four outputs.
- D6269: splits one line into three outputs and adds no power.
- D6260 and D6263: male-to-female extension cables, 2m and 20m long.
- D6266: a cable with male plugs on both ends, linking the host to the power extender or an expansion unit.
Frequently Asked Questions
When do I need a D6239?
When microphone chains get long or crowded on the D6201C host, whose unit outputs DSPPA rates at up to 110W. Your installer sizes it from the hall layout.
Does it raise the number of units the system accepts?
No, it adds power only. The host handles 128 units directly.
Specifications
- Model: D6239
- Official name: Microphone Extend Power Supplier
- Type: Power extender for conference microphone units
- Power output: 350W, DC 24V
- Input interface: 8-pin DCN × 1 (UNIT)
- Output interfaces: 8-pin DCN × 4 (DELEGATES)
- System: DSPPA D62 intelligent conference series
Features
- 350W at DC 24V: a fresh power source for distant mic chains instead of relying on the host alone.
- 1 input and 4 outputs, all 8-pin DCN: one line from the host becomes four microphone chains.
- Signal boost to the units, per DSPPA: steady audio at the far end of a long chain.
- Built for the DSPPA D62 series: powers the chairman and delegate units in the system.
