DSPPA MP1715T MP3 Timing Player with 4.3-Inch Touchscreen
2040.43ر.س
Product description
The DSPPA MP1715T is a scheduled MP3 player for PA systems that plays audio at preset times across 5 timing plans with up to 200 time points each. It suits schools for class bells, factories for shift changes and any building that runs announcements or music on a fixed timetable.
====
The DSPPA MP1715T is the device that rings the bell so nobody has to. Load it with bell tones, announcements and music, set the times once, and it plays each file on schedule every day or on the days you choose. It holds five timing plans, each with up to 200 time points, and every time point can trigger up to 20 tracks.
DSPPA MP1715T specifications
- 4.3-inch capacitive touchscreen with English and Chinese menus.
- 16GB built-in storage, MP3 and WAV playback up to 48kHz/16-bit from a USB stick.
- Three sources: program player, line input and Bluetooth, each with its own volume plus a master control.
- One line output and a headphone jack for monitoring.
- Distortion at or below 0.3%, signal-to-noise ratio at or above 75dB.
Class bells and shift schedules
Each plan runs on a weekly cycle or on a specific date, and any time point can carry an optional end time. A school can keep one plan for the normal timetable, another for Ramadan hours and a third for exam days, then switch between them without reprogramming.
A power outlet that wakes the amplifier
On the back is an AC220V outlet rated at 2000W that follows the schedule. Plug the amplifier into it and the player switches it on 1 to 60 seconds before a time point, then cuts power after the broadcast, so the amplifier is not left running all day. A short-circuit signal output follows the same schedule to trigger another device.
Remote control and networking
DSPPA lists a wireless remote with a 100 m range and 12 keys, each assignable to a broadcast task such as an emergency announcement, the national anthem or switching the power outlet. An RJ45 port connects the unit to a PC for loading tracks and schedules, and DSPPA's software can manage several units centrally, handy for a school complex or a multi-building plant. There is also an RS485 port on the rear.
Typical uses in Saudi Arabia
- Schools: start and end of class bells, and the morning assembly broadcast on time.
- Factories and warehouses: shift start, break and shift end tones.
- Shopping centers: opening music and closing announcements at fixed hours.
- Corporate campuses: start and end of working hours across large buildings.
The unit measures 483x325x88 mm and weighs 4.8 kg net; its 483 mm width matches a standard 19-inch rack.
Fitting it into your sound system
This is a source, not an amplifier. Its line output at 1000±100mV feeds the AUX or line input of any amplifier or mixer, for example a DSPPA MP series amplifier, which then drives the speakers. It runs on AC 220V/50Hz.
MP1715T or the scheduler built into the MAG808?
The MAG808 matrix has a 7-inch touchscreen whose software combines scheduling with zones and alarms, so a site with an MAG808 usually needs no separate player. The MP1715T adds scheduling to an existing system built around a standard amplifier, with a timed 2000W outlet and a 12-key remote on top.
Frequently Asked Questions
Does the DSPPA MP1715T drive speakers directly?
No. It is a line-level source; connect it to an amplifier or mixer input and the amplifier drives the speakers.
How many time points can I set?
Up to 200 per timing plan, each with up to 20 tracks, across 5 plans.
Can I load files from a computer?
Yes, over the RJ45 port with DSPPA's PC software, or by importing and exporting the configuration on a USB stick.
Specifications
- Model: MP1715T
- Type: MP3 timing player for PA systems
- Display: 4.3-inch capacitive LCD touchscreen, Chinese and English menus
- Storage: 16GB built-in
- Sources: Program player, line input, Bluetooth input
- Outputs: 1 line output, headphone monitor output
- Volume control: Independent volume for 3 sources, mixed output, master volume
- Supported files: MP3/WAV up to 48kHz/16-bit via USB
- Timing plans: 5 plans, up to 200 points per plan, up to 20 tracks per point, optional end time
- Timed power outlet: 1x AC220V 2000W, pre-start adjustable 1-60 s
- Signal output: 1 short-circuit signal output linked to timed power
- Wireless remote: 100 m range, 12 programmable keys
- Rear interfaces: Bluetooth antenna, audio in, audio out, LAN, remote receiver antenna, RS485 (A, B, GND), SHORT OUT, 220V/2KW power out, power cord, fuse
- Front interfaces: Power switch, power LED, output level LEDs, screen, USB port, headphone jack
- MP3 input sensitivity: 300±50mV
- Line input sensitivity: 250±50mV
- Line output voltage: 1000±100mV
- Headset monitoring level: 1000±100mV
- Frequency response: 20Hz-20kHz (±3dB)
- Distortion: ≤0.3%
- S/N ratio: ≥75dB (A)
- Operating power: AC 220V/50Hz
- Machine size (LxWxH): 483x325x88 mm
- Net weight: 4.8 kg
Features
- 5 timing plans, up to 200 time points per plan and 20 tracks per point: regular, Ramadan and exam timetables ready in one unit.
- 16GB built-in storage and MP3/WAV playback up to 48kHz/16-bit from USB: plenty of room for bells and recorded announcements.
- Timed AC220V 2000W power outlet: switches the amplifier on 1 to 60 seconds before a time point, then off again.
- 100 m wireless remote with 12 programmable keys: fire an announcement or alert tone without walking to the rack.
- RJ45 port and PC software: load tracks and schedules and control several units from one desk.
