Uniview OEC-R1H-M 13.56MHz MIFARE IC Card Reader, Wiegand 26/34

80.50

Product description


The Uniview OEC-R1H-M is a contactless IC reader for 13.56MHz MIFARE I and MIFARE LITE cards that outputs the card number over Wiegand26/34. It suits companies, schools and clinics running MIFARE cards for entry and attendance, and it is rated for indoor and outdoor installation.

====

The Uniview OEC-R1H-M is a contactless reader for 13.56MHz MIFARE cards, the smart IC cards widely used for door access and time attendance. It reads a card in 0.2 s or less and sends the number to the controller over Wiegand26 or Wiegand34. Choose it when you are starting a new MIFARE-based system, or when you already issue MIFARE I or MIFARE LITE cards and need a reader for one more door.

Uniview OEC-R1H-M at a glance

The OEC-R1H-M is an RF IC card reader built for Uniview access controllers, aimed at access control and attendance. Key numbers:

  • Frequency: 13.56MHz.
  • Cards: MIFARE I and MIFARE LITE.
  • Read range: 0 to 3 cm.
  • Response time: 0.2 s or less.
  • Output: one Wiegand port, 26 or 34 bit.
  • Power: 10.8 to 13.8 V DC at 50 to 70 mA.

Indoor doors and building entrances

The reader is rated for both indoor and outdoor installation, with an operating range of -10°C to +65°C and 10% to 90% humidity. That means it can go on the main entrance, not just on internal office doors. Even so, a small canopy over the reader makes sense at entrances that take full summer sun and dust.

The short read range is useful too. A card has to be held close to open the door, so a badge in someone's pocket will not trigger it as they walk by.

Clear feedback on every tap

A blue/green LED and built-in buzzer tell the user the card was read. They wait for the lock instead of tapping again. The decision to open or refuse sits with the controller, which checks permissions and schedules; the reader only passes the number along.

Building the rest of the system

A card access door has four parts: reader, controller, lock and cards. The reader passes the card number over Wiegand26 or Wiegand34, so choose a controller that accepts that output, then a suitable lock for the door, such as a Uniview 280 kg magnetic lock.

Typical Saudi installations

  • Companies that use one staff card for entry and attendance.
  • Private schools: staff entrance for teachers and administrators.
  • Clinics and medical centers: pharmacy, lab and records rooms.
  • Hotels and serviced apartments in Makkah and Madinah: service doors and stores.

OEC-R1H-M, OEC-R1H-E or OEC-R3H-M?

The OEC-R1H-E shares this reader's housing, size and power input but reads 125kHz EM cards instead of MIFARE. The OEC-R3H-M is also a MIFARE reader, and it adds an RS485 port alongside Wiegand, a read range of up to 5 cm, an IP65 rating, operation down to -30°C and mounting on an 86 × 86 mm electrical box. Pick the R1H-M for standard doors where a slim 17 mm reader looks better; pick the R3H-M for exposed entrances or RS485-based controllers.

Frequently Asked Questions

How is the OEC-R1H-M different from the OEC-R1H-E?

Same housing, size and power. The R1H-M reads 13.56MHz MIFARE cards; the R1H-E reads 125kHz EM cards. Cards do not work across the two.

Can it be mounted at an outdoor entrance?

Yes. It is rated for indoor and outdoor installation and -10°C to +65°C operation. A canopy is advisable at exposed entrances.

Specifications

  • Model: OEC-R1H-M
  • Type: Contactless IC card reader (Mifare Series)
  • Operating frequency: 13.56MHz
  • Card support: MIFARE I and MIFARE LITE
  • Reading distance: 0 to 3 cm
  • Keys: Not supported
  • Response time: ≤ 0.2 s
  • Interface: 1 Wiegand output (Wiegand26/34)
  • Indicators: Built-in blue/green LED and buzzer
  • Installation: Indoor and outdoor
  • Power supply: DC 10.8 to 13.8 V, 50 to 70 mA
  • Operating environment: -10°C to +65°C, 10% to 90% humidity
  • Dimensions (L × W × H): 115 × 75 × 17 mm

Features

  • 13.56MHz MIFARE I and MIFARE LITE support: works with the smart IC cards used for entry and attendance.
  • Read range of 0 to 3 cm: a card opens the door only when presented, not when someone walks past.
  • Response in 0.2 s or less: the morning queue at the staff entrance keeps moving.
  • Wiegand26/34 output and 10.8 to 13.8 V DC input: connects to controllers that accept Wiegand.
  • Indoor and outdoor mounting with blue/green LED and buzzer: fits inner doors and building entrances.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌