DSPPA MAG6463B Wall Mount IP Speaker with 2x25W Amplifier

1656.16

Product description


The DSPPA MAG6463B combines a network audio processor, a high-fidelity speaker and a 2x25W digital amplifier in one MAG6000 wall unit. An IR remote and a digital status display give local control, which suits meeting rooms, restaurants and hotel lounges that need more output than a ceiling speaker.

====

The DSPPA MAG6463B is a complete wall-mounted audio endpoint: a network processor that receives streams over TCP/IP, a high-fidelity speaker and a 2x25W digital amplifier in one cabinet. It belongs to DSPPA's MAG6000 IP PA system and runs on 220V mains. What sets it apart from smaller network speakers is local control: an infrared remote, a digital status display and a microphone input for the room itself.

DSPPA MAG6463B specifications

  • Rated output: 25W x 2.
  • Output mode: 4-ohm constant resistance.
  • Frequency response: 50Hz to 18kHz (±3dB).
  • THD: 0.5% or less at 1kHz.
  • Line input SNR: 75dB or more.
  • Power: AC 220V/50Hz, 85W consumption.

Control from inside the room

With many PA systems, changing the volume means walking to the equipment room. On the MAG6463B, the IR remote adjusts volume and playback status, an LED shows signal status and a digital display shows the working state. Over the network, you set the priority between three sources: the network stream, local audio on the AUX input and the room microphone. If a trainer is speaking, you decide whether a general announcement cuts in.

Inputs, outputs and protection

The unit offers an AUX input, an AUX output at 900mV or more, a 5mV microphone input, an EMC emergency output and a short-circuit output for an external alert. It decodes MP3 and 16-bit digital audio up to 48kHz. Protection covers an AC fuse plus over-current, over-heat, over-voltage, under-voltage, overload and short-circuit conditions, which matters in buildings with unstable mains.

Where the MAG6463B fits in Saudi Arabia

  • Meeting and training rooms: PA announcements plus the trainer's mic on the local input.
  • Restaurants and cafes: background music, with volume set by remote as the room fills.
  • Hotel lounges and event halls: more output than a ceiling speaker, with local control.
  • Schools: labs and indoor sports halls within a networked school broadcast system.

MAG6000 system compatibility

DSPPA lists the MAG6463B among its MAG6000 IP speakers. It plays background music, emergency paging and alarm signals from the system host. Dual network ports let it work across network segments. It runs on AC mains rather than PoE, so each unit needs a 220V outlet nearby. It measures 310 x 215 x 200 mm and weighs 4.3 kg net, so mount it on a wall that can carry the load.

MAG6463B or the MAG6311 ceiling speaker?

Both are MAG6000 endpoints with dual network ports and AC power. The MAG6463B is a wall unit with a 2x25W amplifier, IR remote, digital display, multi-level protection and 85W consumption. The MAG6311 is a lighter 1.5 kg ceiling speaker with a 2x15W amplifier and USB and SD slots for local MP3 playback, which DSPPA does not list for the MAG6463B. Choose the MAG6463B for in-room control and higher output, and the MAG6311 when the false ceiling is the right place. For outdoor yards outside a MAG6000 setup, the 50W DSP270E horn runs on PoE and supports SIP.

Frequently Asked Questions

Does the MAG6463B support remote control?

Yes. DSPPA lists infrared remote control for volume and play status.

How much power does it draw?

DSPPA lists 85W consumption on AC 220V/50Hz. It is not PoE powered.

Specifications

  • Model: MAG6463B
  • Series: MAG6000 IP Network PA System (IP Speaker)
  • Rated output power: 25W × 2
  • Output mode: 4Ω constant resistance
  • AUX OUT level: ≥900mV
  • MIC sensitivity (unbalanced): ≤5mV
  • LINE sensitivity (unbalanced): ≤350mV
  • Frequency response: 50Hz-18kHz (±3dB)
  • THD: ≤0.5% (1kHz)
  • SNR (LINE IN): ≥75dB
  • Network: Dual network interfaces, TCP/IP transport
  • Decoding: MP3, 16-bit digital audio up to 48kHz
  • Interfaces: 1 AUX IN, 1 AUX OUT, 1 MIC IN, 1 EMC OUT, 1 short-circuit output
  • Control: IR remote, local volume and play status, network-set priorities
  • Display: LED signal indicator, digital status display
  • Protection: AC fuse, over-current, over-heat, over-voltage, under-voltage, overload, short circuit
  • Power supply: AC 220V/50Hz
  • Power consumption: 85W
  • Unit size (L × W × H): 310 × 215 × 200 mm
  • Net weight: 4.3 kg

Features

  • 2x25W digital amplifier: enough output for mid-size halls and lounges.
  • Dual network ports: works across network segments and mounts on any wall the network reaches.
  • IR remote, digital display and LED indicator: adjust volume and check playback status without visiting the equipment room.
  • Network-set priority across three sources: network stream, local audio and the room microphone.
  • 50Hz to 18kHz response with THD of 0.5% or less: suitable for both background music and speech.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌