DSPPA DSP2254EN 10W EN54-24 Fireproof Ceiling Speaker
136.16ر.س
Product description
The DSPPA DSP2254EN is an EN54-24 certified ceiling speaker for voice alarm and PA systems, rated 10W on a 100V line and protected by a steel fire dome. It fits corridors and public areas in hotels, malls, hospitals and offices that need certified evacuation speakers.
====
The DSPPA DSP2254EN is an EN54-24:2008 certified ceiling speaker made for voice alarm and public address systems inside buildings. It runs at 10W on a 100V line, and a steel fire dome encloses the back of the driver and its wiring. If you are fitting out corridors, offices, hotel floors or mall walkways and need a speaker that keeps doing its job in an emergency, this is the category it belongs to.
DSPPA DSP2254EN key specifications
Three transformer taps let you match each speaker to the space and to the number of units sharing one amplifier channel.
- Taps: 10W, 5W and 2.5W on a 100V line.
- Nominal power 10W, music power 20W.
- 165mm (about 6.5-inch) full-range dual-cone driver.
- Sensitivity 90dB (1W/1m).
- Frequency response 350 to 18,000Hz (-10dB).
- 200mm diameter, 100mm deep, 1.11kg.
Fire dome, ceramic terminal and thermal fuse
What separates this model from an ordinary ceiling speaker is hidden once it is installed. Behind the painted aluminium grille sits a steel dome. Wiring lands on a ceramic connector, and a thermal fuse is built in. DSPPA describes this combination as the basis for reliable operation.
The speaker is classed EN54-24 Type A for indoor use and rated IP21C. Keep it in dry interior ceilings; it is not intended for open-air or high-humidity areas.
Coverage that favours speech
Dispersion is 360 degrees at 500Hz, narrowing to 236 degrees at 1kHz and 86 degrees at 2kHz. In practice the core speech frequencies spread widely under each unit, which matters more for evacuation messages than deep bass. Spacing depends on ceiling height and background noise.
Typical projects in Saudi Arabia
- Hotels in Makkah, Madinah and Riyadh: guest corridors and lift lobbies.
- Shopping malls: interior walkways under suspended ceilings.
- Hospitals and clinics: corridors and waiting areas.
- Office towers and schools: corridors, halls and open-plan floors.
Where a project must meet the requirements of an official authority, confirm them with a licensed safety consultant before you finalise the speaker schedule.
Installation and compatibility
The DSP2254EN is designed for suspended ceilings and gypsum panels and supports daisy-chain wiring, so one cable run can feed every speaker in a zone. It works with any 100V line amplifier or voice evacuation controller, such as the 8-zone DSPPA PAVA9500.
DSP2254EN or DSP3254EN?
Both are 10W EN54 ceiling speakers with 10/5/2.5W taps. The DSP2254EN is lighter at 1.11kg, has an officially listed steel fire dome and covers 350 to 18,000Hz. The DSP3254EN weighs 1.6kg, reaches down to 90Hz and up to 20,000Hz with 91.7dB sensitivity, and fixes with spring clips into a 185 to 200mm hole. Pick the DSP2254EN when rear fire protection is the priority, and the DSP3254EN when you also want fuller background music. The DSP2601B and DSP2603 wall speakers in the same category are paging and music speakers without EN54 certification, so they are not substitutes.
Frequently Asked Questions
Is the DSP2254EN suitable for a voice evacuation system?
Yes. It is certified to EN54-24:2008 for loudspeakers in fire voice alarm systems and connects to 100V evacuation controllers and amplifiers.
Can I install it outdoors?
No. It is classed Type A for indoor use and rated IP21C, so it belongs in dry interior ceilings.
How many can run on a 120W amplifier?
At the 10W tap the math gives 12 speakers with no headroom; leaving about 20% spare brings that to 9 or 10. At the 5W tap the count roughly doubles.
Specifications
- Model: DSP2254EN
- Standard: EN54-24:2008 (loudspeaker for voice alarm systems for fire detection and fire alarm)
- Environment class: Type A, indoor applications
- IP rating (EN60529): IP21C
- Speaker type: 1-way dual cone, full range, Ø165mm
- Transformer taps: 100V: 10W, 5W, 2.5W
- Frequency response (-10dB): 350-18,000Hz
- Sensitivity (1W/1m): 90dB
- Coverage angle (-6dB): 360° (500Hz), 236° (1kHz), 86° (2kHz), 64° (4kHz), 27° (8kHz)
- Directivity index DI: 2.6 (500Hz), 3.3 (1kHz), 7.1 (2kHz), 8.5 (4kHz), 10.8 (8kHz) dB
- Directivity factor Q: 1.8 (500Hz), 2.2 (1kHz), 5.2 (2kHz), 7.0 (4kHz), 12.0 (8kHz)
- Nominal / music power: 10W / 20W
- Nominal impedance @1kHz: 1kΩ (10W), 2kΩ (5W), 4kΩ (2.5W)
- Dimensions (Ø × depth): 200 × 100mm
- Weight: 1.11kg
- Material: Steel dome, painted aluminium grille
- Colour: White and red
- Connections: Ceramic connector and thermal fuse
- Installation: False ceiling or gypsum panel, daisy-chain wiring
Features
- EN54-24:2008 certified, Type A: built for indoor voice alarm and fire evacuation systems.
- Three 100V taps (10W, 5W, 2.5W): set the level per area and spread amplifier power across more speakers.
- Steel fire dome and aluminium grille: protects the rear of the speaker and its wiring from fire and damage.
- Ceramic connector with built-in thermal fuse: dependable operation when temperatures rise.
- 165mm full-range dual-cone driver, 90dB sensitivity: clear speech in corridors at low power.
