Grandstream GWN7806PL Pro 48-Port PoE+ Switch with 6 SFP+

1716.38

Product description


The Grandstream GWN7806PL Pro is a managed switch with 48 Gigabit PoE+ ports up to 30W, a 400W budget, six 10G SFP+ uplinks and stacking for up to 8 switches. It fits warehouses, schools and call centers running large numbers of fixed cameras and IP phones.

====

The Grandstream GWN7806PL Pro packs 48 Gigabit PoE+ ports into a single 1U switch, with a 400W budget and six 10G SFP+ uplinks. It is the lower-power 48-port version in the GWN7800 Pro Series, yet it keeps every top-tier feature: stacking for up to 8 switches and dual boot. It suits sites with many light devices, such as fixed cameras and IP phones.

Grandstream GWN7806PL Pro specifications

  • 48 × Gigabit RJ45, all PoE/PoE+ under IEEE 802.3af/at.
  • Up to 30W per port, 400W total.
  • 6 × 10G SFP+.
  • 216 Gbps switching capacity, 108 Gbps non-blocking throughput.

400W across 48 ports: the practical math

With every port drawing power, the average is about 8.3W per port. If your fixed cameras or phones sit inside that figure, one switch handles 48 devices. Allocation is dynamic, so a device that draws less frees power for others, and you can give priority to critical ports such as gate cameras. If most of your devices need 15W or more, plan fewer devices per switch or move to the GWN7806PH Pro.

Six 10G links for a distributed network

The 24-port models have two uplinks; this one has six SFP+ ports. Use them for floor switches, the camera recorder and the router, and pair two with link aggregation for redundancy. Stack up to seven more switches and manage up to 384 ports from one screen. On sprawling warehouse sites, fiber from the SFP+ ports reaches buildings that copper, limited to 100 meters, cannot.

Resilience and security

The switch boots from two flash chips, so a corrupted image on one does not stop it, and it supports 1+1 redundancy with an external RPS. Security covers 802.1X, ARP inspection, IP source guard and policy routing to keep departmental traffic separate. STP, RSTP and MSTP with up to 64 instances, plus loop protection, keep a miswired cable on one floor from stopping the whole network.

Saudi use cases

  • A large warehouse in Riyadh or Dammam: dozens of fixed cameras covering racks and doors.
  • A school: corridor cameras, PoE IP speakers for announcements and admin phones.
  • A call center: 40 or more IP phones on one switch.

Management and compatibility

Manage it from GDMS Networking, GWN Manager, the web UI or the CLI. It works with 802.3af/at devices from any vendor. Scan its QR code to add it to GDMS Networking next to your other GWN switches, access points and router.

GWN7806PL Pro, GWN7806PH Pro or the standard GWN7806P?

The GWN7806PH Pro has the same ports and stacking but raises each port to 60W and the budget to 720W, with a maximum draw of 870.9W against 509.3W here. The standard GWN7806P also has 48 PoE+ ports, 400W and six SFP+, but stacks only 4 units. Choose the GWN7806PL Pro for large numbers of low-power devices.

Frequently Asked Questions

Does the GWN7806PL Pro support stacking?

Yes, up to 8 switches managed as one device, a feature reserved for the GWN7806 Pro models in this series.

How many cameras can it power?

Up to 48 by port count, with a 400W budget or about 8.3W per port when all are loaded. Check each camera's power rating.

Why choose it over the GWN7806PH Pro?

If every device needs 30W or less, the PL gives you the same ports and stacking with a 509.3W maximum draw instead of 870.9W.

Specifications

  • Model: GWN7806PL Pro
  • Series: GWN7800 Pro, Layer 2++ managed switch
  • Ethernet ports: 48 × Gigabit RJ45
  • Uplink ports: 6 × 10G SFP+
  • Other ports: 1 × console (MGMT) port, reset pinhole
  • PoE ports: 48 × PoE/PoE+
  • PoE standard: IEEE 802.3af/at
  • Max PoE per port: 30W
  • Total PoE budget: 400W
  • Switching capacity: 216 Gbps
  • Forwarding rate: 160.704 Mpps
  • Non-blocking throughput: 108 Gbps
  • Forwarding mode: Store-and-forward
  • Packet buffer: 8.4 Mb
  • Latency: Under 4 µs
  • MAC address table: Static, dynamic and filtering, with migration records
  • Jumbo frame: Up to 12288 bytes
  • VLAN: 4K VLANs: port-based, 802.1Q, QinQ, MAC-based, protocol-based, VLAN translation, voice VLAN
  • ARP/NDP: Static and dynamic entries
  • Routing: IPv4 and IPv6 static routes, plus policy routing
  • Link aggregation: Static and LACP
  • Spanning tree: STP/RSTP/MSTP/PVST(+)/RPVST(+), 64 MSTP/PVST instances
  • Multicast: IGMP Snooping v2/v3, MLD Snooping v1/v2
  • QoS: Port priority, priority mapping (802.1p, DSCP, IP precedence), SP/WRR/WFQ/SP-WRR/SP-WFQ scheduling, traffic shaping, rate limiting
  • ACL: ACLs for Ethernet, IPv4 and IPv6
  • DHCP: DHCP client, server, relay and snooping; DHCPv6 client and snooping; ND snooping
  • IPv6: IPv4, IPv6 or dual-stack deployment
  • Smart PoE: Dynamic per-port allocation, port power priority, per-port power limit, time-based port power schedules, LLDP-MED power negotiation
  • Pro AV: Built-in Pro AV QoS, IGMP/MLD snooping for video, IEEE 1588v2 transparent clock (PTPv2)
  • Security: User hierarchy, HTTPS/SSH/Telnet, 802.1X and MAC authentication, RADIUS/TACACS+, storm control, port isolation, port security and sticky MAC, IP/IPv6 source guard, DoS prevention, ARP inspection, CPU protection, loopback/BPDU/root protection, firmware signing, Kensington slot
  • Management: Embedded web UI controller, GDMS Networking (cloud), GWN Manager, GWN routers, GWN App, CLI via console/Telnet/SSH, SNMP v1/v2c/v3, RMON
  • Maintenance and diagnostics: SPAN/RSPAN mirroring, copper cable and fiber module diagnostics, ping, traceroute; upgrade via FTPS, TFTP, HTTP/HTTPS or local upload
  • Stacking: Yes, up to 8 switches virtualized as one
  • Dual boot: Dual boot on two flash chips, redundant system files
  • LEDs: 1 tri-color system LED, 2 PWR/RPS LEDs, 54 data LEDs, 48 PoE LEDs
  • Power input: 100-240V AC, 50/60 Hz
  • Power redundancy: 1+1 with external RPS
  • Power consumption: 65.4W idle, 509.3W max (400W PoE)
  • Surge / ESD: ±6 kV CM power, ±4 kV CM network ports, ±12 kV contact ESD
  • MTBF: 70,000 hours
  • Operating environment: 0 to 45°C, 10-90% RH non-condensing
  • Storage environment: -10 to 60°C, 5-95% RH non-condensing
  • Weight: 5.05 kg
  • Mounting: Desktop or 19-inch rack
  • In the box: Switch, 25 cm ground cable, 4 rubber footpads, anti-trip power cord, 8 M3×6 mm flat-head screws, 1.2 m 10A AC cable, quick installation guide, regulatory paper, 2 × rack-mounting kits
  • Certifications: FCC, CE, RCM, IC

Features

  • 48 Gigabit PoE+ ports up to 30W: a fixed camera or IP phone on every port of one 1U switch.
  • 400W budget: about 8.3W per port with every port loaded, allocated dynamically per device.
  • Six 10G SFP+ uplinks: fast links to edge switches or the camera recorder.
  • Stacking for up to 8 switches: up to 384 ports managed as one device.
  • 509.3W maximum draw: well below the PH version, so a smaller UPS will do.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌