DSPPA MP4000 2000W PA Power Amplifier with 100V/200V Outputs
10053.12ر.س
Product description
The DSPPA MP4000 is the most powerful model in DSPPA's MP3000/MP3500/MP4000 family, rated at 2000W with 200V, 100V and P1 outputs. It is aimed at wide sites such as residential compounds, university campuses and factories where speaker cables run a long way.
====
The DSPPA MP4000 is the amplifier to reach for when a site is too big for a single 1000W unit. It delivers 2000W rated output and adds a 200V output next to the usual 100V and P1 terminals, which sets it apart from the rest of the family. Expect to see it in the sound room of a large residential compound, a university, a factory or an outdoor sports venue where speaker cables stretch for hundreds of meters.
DSPPA MP4000 power and outputs
The MP4000 belongs to DSPPA's Classical Series and shares the MP3000's 484 x 480 x 132 mm chassis. At 36 kg net it is the heavier of the two.
- Rated output: 2000W.
- Outputs: 200V, 100V and P1, transformer-isolated.
- Rated consumption: 3500W on 220V/50Hz.
- Signal-to-noise ratio of 82 dB or better; distortion of 1% or lower.
Why a 200V output matters
A higher line voltage means less current in the speaker cable for the same power. Less current means lower losses over distance and the option of a thinner cable, which helps when speakers line the perimeter of a compound or a wide outdoor car park. The speakers on that line must be suitable for 200V.
Feeding several amplifiers
The rear panel has an XLR input and a 6.35 mm input, each with its own link output. You can chain a row of MP4000 and MP3000 units from one mixer, with every amplifier serving its own area: gates, sports fields or office blocks.
Protection and status monitoring
- POWER, SIGNAL, CLIP, PROT and TEMP LEDs on the front.
- Over-temperature and DC protection, with current limiting on a shorted line.
- Fan cooling with rear intake and front exhaust.
- F20AL250V fuse on the rear panel, according to the datasheet drawing.
Typical MP4000 projects in KSA
- Large residential compounds: announcements and music along internal streets, gardens and parking.
- Universities and colleges: coverage for courtyards and walkways between buildings.
- Factories and industrial cities: paging across production halls and loading yards.
- Open sports facilities: high-power horn speakers around the stands.
What goes in front of the MP4000
Like any power amplifier, it needs a line-level source: a DSPPA MP9811P preamplifier to combine microphones and players, an audio mixer, or the AUX output of a central paging unit.
MP4000 or MP3000?
The MP3000 delivers 1000W through P1, 70V and 100V outputs, draws 1800W and weighs 30 kg. The MP4000 delivers 2000W through P1, 100V and 200V outputs, draws 3500W and weighs 36 kg. Chassis, inputs and frequency response are identical, so the choice comes down to total speaker load, cable length and whether you need the 200V line.
Frequently Asked Questions
How much power does the MP4000 draw?
Rated consumption is 3500W on AC 220V/50Hz, so plan a suitable dedicated circuit in the equipment room.
Can I connect microphones directly?
No. The inputs are line level only (XLR and 6.35 mm). Put a preamp such as the MP9811P or a mixer in front of it.
Specifications
- Model: MP4000
- Type: PA power amplifier, Classical Series
- Rated output power: 2000W
- Output modes: P1, 100V, 200V (transformer-isolated)
- Output terminals: 200V, 100V, P1, COM
- Inputs: Balanced XLR input + 6.35 mm jack input
- Link outputs: XLR + 6.35 mm
- Input sensitivity: ≤1100 mV
- S/N ratio: ≥82 dB
- Frequency response: 80 Hz to 15 kHz (±3 dB)
- Distortion: ≤1% (1 kHz, normal operation)
- Indicators: POWER, CLIP, SIGNAL, PROT, TEMP
- Protection: High temperature, DC voltage, short-circuit limiting
- Controls: Power switch, input attenuator (volume)
- Cooling: Fan: rear intake, front exhaust
- Fuse: F20AL250V (per rear panel drawing)
- Power supply: AC 220V/50Hz
- Rated power consumption: 3500W
- Unit size (L×W×H): 484×480×132 mm
- Net weight: 36 kg
Features
- 2000W rated output: close to double the MP3000, so fewer amplifiers are needed to cover a whole site.
- 200V output alongside 100V and P1: a higher-voltage line for long cable runs and a 100V line for standard speakers.
- XLR and 6.35 mm inputs with link outputs: feed further amplifiers from the same signal to serve several buildings.
- 1100 mV input sensitivity and 80 Hz to 15 kHz response: clear paging and background music.
- Over-temperature, DC and short-circuit protection with a PROT LED: locate faults quickly on a large speaker network.
