DSPPA MP3000 1000W PA Power Amplifier with 70V/100V Outputs
5569.60ر.س
Product description
The DSPPA MP3000 is a Classical Series PA power amplifier rated at 1000W, with transformer-isolated 100V, 70V and P1 outputs. Feed it from a mixer or preamp and it drives a large speaker network across a school, shopping center or warehouse.
====
The DSPPA MP3000 is a 1000W PA power amplifier for projects where one unit has to drive a long list of speakers on a 100V line. It has no microphone inputs or media player of its own. Instead, it takes a line-level signal from a mixer or preamplifier and delivers the power. That makes it a typical rack unit in the control room of a large school, a shopping center or an open-plan warehouse.
DSPPA MP3000 specifications at a glance
DSPPA lists the MP3000 in its Classical Series of power amplifiers. The chassis measures 484 x 480 x 132 mm and weighs 30 kg net.
- Output power: 1000W.
- Outputs: 100V, 70V and P1, transformer-isolated.
- Input sensitivity: 1100 mV or lower.
- Signal-to-noise ratio: 82 dB or better.
- Frequency response: 80 Hz to 15 kHz.
- Distortion: 1% or lower at 1 kHz.
- Rated consumption: 1800W on 220V/50Hz mains.
Three outputs for different speaker types
The 100V output is the usual choice for building PA: ceiling, wall and horn speakers with line transformers connect in parallel, and each speaker's tap sets how much power it draws. The 70V output serves speakers designed for that voltage, and P1 is the low-impedance output.
Sizing is simple arithmetic. Add up the tap ratings of every speaker and keep the total comfortably below 1000W. Eighty horn speakers on a 10W tap come to 800W, which leaves healthy headroom.
Linking a second amplifier
The rear panel carries a balanced XLR input and a 6.35 mm jack input, plus a link output of each type. Run the mixer into the MP3000, then loop the link output to another amplifier that covers a second building. DSPPA notes that the balanced line keeps noise down over longer cable runs.
Protection for long operating hours
- Five front LEDs: POWER, SIGNAL, CLIP, PROT and TEMP.
- The CLIP LED tells you to back off the input level before distortion reaches the speakers.
- Over-temperature and DC protection, with current limiting on a shorted output.
- Fan cooling draws air in at the rear and exhausts at the front, so leave ventilation space in the rack.
Where the MP3000 fits in Saudi Arabia
- Large schools: horn speakers across the yard and corridors for morning assembly and student paging.
- Shopping centers: background music and announcements over many ceiling speakers.
- Warehouses and factories: staff paging in wide, noisy halls.
- Large mosques: feeding the outdoor courtyard speakers from the main mosque sound source.
Compatible sources
Any line-level source works: a DSPPA MP9811P preamplifier, an audio mixer or the AUX OUT of a mixer amplifier.
MP3000 or MP4000?
Both share the same chassis, input sensitivity and frequency response. The MP3000 delivers 1000W through P1, 70V and 100V outputs and draws 1800W. The MP4000 delivers 2000W through P1, 100V and 200V outputs, draws 3500W and weighs 36 kg. Pick the MP3000 when your speakers run on 70V or 100V and the total load stays under roughly 1000W.
Frequently Asked Questions
How many speakers can the DSPPA MP3000 drive?
It depends on the tap of each speaker. Add up the taps on the 100V line and keep the total below the 1000W rating; 80 speakers on a 10W tap total 800W.
Can I plug a microphone straight into the MP3000?
No. It is a power amplifier with line inputs only (XLR and 6.35 mm, 1100 mV sensitivity). Connect microphones to a mixer or a preamp such as the MP9811P first.
What is the difference between the MP3000 and MP4000?
The MP3000 is rated 1000W with P1, 70V and 100V outputs; the MP4000 is rated 2000W with P1, 100V and 200V outputs. Size and input types are the same.
Specifications
- Model: MP3000
- Type: PA power amplifier, Classical Series
- Output power: 1000W
- Output modes: P1, 70V, 100V (transformer-isolated)
- Output terminals: 100V, 70V, P1, COM
- Inputs: Balanced XLR input + 6.35 mm jack input
- Link outputs: XLR + 6.35 mm
- Input sensitivity: ≤1100 mV
- S/N ratio: ≥82 dB
- Frequency response: 80 Hz to 15 kHz (±3 dB)
- Distortion: ≤1% (1 kHz, normal operation)
- Indicators: POWER, CLIP, SIGNAL, PROT, TEMP
- Protection: High temperature, DC voltage, short-circuit limiting
- Controls: Power switch, input attenuator (volume)
- Cooling: Fan: rear intake, front exhaust
- Power supply: AC 220V/50Hz
- Rated power consumption: 1800W
- Unit size (L×W×H): 484×480×132 mm
- Net weight: 30 kg
Features
- 1000W output: enough for a large 100V speaker network across a school yard or mall from a single unit.
- 3 transformer-isolated outputs (100V, 70V, P1): match the amplifier to the speakers on site instead of buying one amp per line type.
- XLR and 6.35 mm inputs with matching link outputs: pass the same signal to a second amplifier without an extra mixer.
- 5 status LEDs (POWER, SIGNAL, CLIP, PROT, TEMP): technicians spot clipping, a shorted line or overheating at a glance.
- Over-temperature, DC and output short-circuit protection: guards the amplifier and speakers against wiring faults.
