DSPPA D5824 Wireless Desktop Gooseneck Mic System, 2 Mics
1834.72ر.س
Product description
The DSPPA D5824 combines a dual-channel true diversity receiver with two gooseneck desk mics that run on batteries or DC 12V. It suits boardroom tables, lecterns and interview panels where running mic cables is not practical.
====
The DSPPA D5824 is a wireless desktop mic kit for boardroom tables and lecterns where you would rather not run cables under the carpet or through the floor. It pairs a dual-channel true diversity receiver with two gooseneck desk mics, and each mic runs on batteries or a DC 12V supply. Set it on the table, switch it on, and the voice reaches your sound system with no wire at all.
DSPPA D5824 at a glance
- Frequency range 632 to 695.25MHz, 200 channels in 250KHz steps.
- Mic transmit power of 14dBm or 6dBm.
- Runtime over 10 hours at 14dBm and over 15 hours at 6dBm.
- Audio response 120Hz to 15KHz, signal-to-noise ratio above 70dB.
- Mic base measures 151×100×55mm; each mic weighs 0.45kg.
Batteries or a fixed adapter
What separates this kit from the handheld and lavalier versions is dual power. The desk mic takes AA batteries and also accepts DC 12V. In a permanent meeting room you plug in an adapter and forget about batteries; in a temporary setup, or when the mic moves between rooms, the batteries take over.
The base has a display for frequency, channel, RF level and volume, and you can adjust transmit power and volume on the mic itself. The antenna is an FPC type inside the base, so nothing sticks up from the table.
Gooseneck arm with an optional square head
DSPPA describes the mic as a gooseneck design, a flexible arm you bend toward a seated speaker, and offers an optional square mic head.
Receiver and outputs
The receiver uses two antennas and picks the stronger signal, locks frequencies with a PLL circuit and pairs with each mic by infrared. Each channel has a balanced XLR output, and a 6.35mm jack mixes both for an amplifier. Sensitivity is -95dBm or better, power is DC 12V at 600mA, and the chassis measures 483×196×44mm. Separate front-panel volume controls let you balance the chair against a guest.
Where it fits in Saudi Arabia
- Company meeting rooms and board tables.
- Interview and oral exam panels at universities and government offices.
- Hotel conference lecterns in Riyadh and Jeddah.
- The announcer's desk for a school broadcast, or the imam's desk in a mosque office.
Scaling up
With 200 channels you can run several kits in one building on separate frequencies. If the receivers live in one rack away from the rooms, the DSPPA D5828C antenna amplifier shares a single antenna pair across them.
D5824, D5821 or D5822?
All three use the same receiver. The D5824 has gooseneck desk mics that run on batteries or DC 12V, for seated speakers. The D5821 has handheld mics on two AA cells only, for preachers and hosts. The D5822 has lavalier mics on belt-packs with 8+ hours, for presenters on the move. If your table needs four mics, look at the DSPPA D5844 with its four-channel receiver.
Frequently Asked Questions
Can the DSPPA D5824 mics run without batteries?
Yes. The desk mic accepts DC 12V as well as AA batteries, so you can power it from a fixed adapter.
How long do the mics last on batteries?
More than 10 hours at 14dBm transmit power and more than 15 hours at 6dBm.
Can I run several kits in one building?
Yes. The receiver offers 200 UHF channels, so each kit can be set to its own frequencies.
Specifications
- Model: D5824
- System configuration: 1 dual-channel receiver + 2 wireless gooseneck desktop mics
- Frequency range: 632-695.25MHz
- Channels: 200
- Frequency step: 250KHz
- Dynamic range: 82dB
- Max frequency deviation: ±45KHz
- Audio frequency response: 120Hz-15KHz (±3dB)
- Signal-to-noise ratio: Greater than 70dB
- Total harmonic distortion: ≤1%
- Operating temperature: -10°C to +40°C
- Antenna interface: BNC / 50Ω
- Receiver sensitivity: ≤-95dBm
- Receiver display: Screen showing frequency, group, RF signal and volume level
- Receiver technology: Dual-channel True Diversity with PLL digital frequency locking and IR frequency pairing
- Audio outputs: 2 balanced XLR outputs (one per channel) + 6.35mm mixed output for both channels
- Mixed output level switch: LINE / MIC
- Receiver power supply: DC 12V, 600mA
- Receiver dimensions: 483×196×44mm
- Receiver weight: 2.3kg
- Mic design: Gooseneck desktop mic; optional square mic available
- Mic antenna: FPC antenna
- RF output power: High 14dBm / Low 6dBm
- Spurious suppression: -60dB
- Mic power supply: AA batteries or DC 12V
- Battery life: Over 10 hours at 14dBm; over 15 hours at 6dBm
- Mic display: Shows frequency, channel, RF signal and volume
- Mic base dimensions: 151×100×55mm
- Mic weight: 0.45kg
Features
- Dual power from AA batteries or DC 12V: run on cells for a temporary setup, or on a fixed adapter at the boardroom table.
- Over 10 hours at 14dBm and over 15 hours at 6dBm: a full day of meetings without changing batteries.
- Base display shows frequency, channel, RF level and volume: check each mic before the session starts.
- Selectable 14dBm or 6dBm transmit power: drop to low power in small rooms to stretch battery life.
- 200 UHF channels with dual-antenna reception: run several kits in one building on separate frequencies.
