DSPPA MAG6895 1000W 1U IP Network Amplifier for 100V Speakers

6215.66

Product description


The DSPPA MAG6895 delivers 1000W on a 100V line from a 1U chassis and receives the PA stream through two network ports. It suits large open areas such as mosque courtyards, complex car parks, warehouses and school sports grounds.

====

The DSPPA MAG6895 is the unit to reach for when the speakers are many and the space is open. It delivers 1000W on a 100V line, takes its audio from the PA server over the network, and occupies a single rack unit. Picture a large mosque courtyard, a mall car park or a warehouse yard that needs dozens of horn speakers, all running from one box in the control room.

DSPPA MAG6895 specifications

From DSPPA's official product page and datasheet:

  • 1000W rated output on a 100V constant-voltage line.
  • Digital amplification above 90% efficiency, 1300W rated consumption.
  • Two 100/10Mbps network ports that work across network segments.
  • 80Hz to 15kHz response, distortion of 1% or less, SNR of 77dB or more.
  • 483×400×44 mm, 6.12 kg net weight.

A thousand watts from one rack unit

Instead of two 500W amplifiers, one MAG6895 can carry a single long speaker line. DSPPA's limit is simple: the connected speakers must not exceed 1000W in total. On the rear there is a 100V backup input that accepts a signal from another constant-voltage amplifier, and an AUX output to feed an extra amplifier as the project grows. DSPPA also states that it uses industrial-grade components rated for a wide operating temperature range.

Fire alarm and emergency linkage

The amplifier is designed to sit inside a PA system that talks to the fire alarm. It has an emergency line input, a linkage trigger and a host-controlled EMC output. Sources are ranked in 7 or more priority levels, so emergency messages override routine paging, and paging overrides background music.

Standalone playback and front-panel control

The broadcast schedule is stored on a Micro SD card and plays on time if the host connection drops; the clock resyncs with the host once the link returns. The unit decodes 16-bit MP3, WMA and PCM up to 48kHz. On the front, LEDs report network, signal and protection status, and 8 buttons include a Set key for viewing and changing the IP address without a PC.

Typical sites in Saudi Arabia

  • Large mosque courtyards and outdoor Eid prayer grounds.
  • Car parks at complexes, towers and malls: security calls and driver guidance.
  • Warehouses and factories: open halls with high-power horn speakers.
  • School and university sports grounds: morning assembly and events.

Works with the MAG6000 IP PA system

DSPPA lists this model among the rack-mounted network amplifiers of its MAG6000 system, so it takes streaming, schedules and paging from the system's PA server. The rear expansion port accepts on-demand color screens, intercom panels, Bluetooth receivers and GPS time modules and powers them directly. When planning, add up every speaker tap on the line and leave headroom below 1000W.

MAG6895 or MAG6865?

The core difference is power: 1000W on the MAG6895 against 650W on the MAG6865, with 1300W versus 780W consumption. The MAG6895 is deeper (400 mm) and heavier (6.12 kg versus 4.8 kg), while both share dual LAN ports, SD-based scheduled playback and a 350mV AUX input. Go with the MAG6895 when your speakers exceed 650W, and stay with the MAG6865 for smaller zones.

Frequently Asked Questions

How many speakers can the DSPPA MAG6895 drive?

As many as you like within a 1000W total, for example 50 horns tapped at 20W or 100 ceiling speakers at 10W.

Does it need a dedicated power circuit?

Rated consumption is 1300W on an AC220V/50Hz supply, with an F10AL250V fuse on the rear. Plan a suitable circuit in the rack room.

Does it keep working if the PA server stops?

Yes for scheduled programs stored on the Micro SD card. Live streaming and network paging need the host.

Specifications

  • Model: MAG6895
  • Type: 1U IP network amplifier, 100V output
  • Rated 100V output power: 1000W
  • Amplifier efficiency: Above 90% (digital amplifier)
  • Network: 2× LAN (LAN1/LAN2), 100/10Mbps TCP/IP, line-fault detection and path selection, cross-segment operation
  • AUX IN: Sensitivity 350mV±50mV, 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥77dB
  • AUX OUT: Rated output 1000mV±100mV, 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥75dB
  • MIC IN: Sensitivity 5mV±1mV, 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥71dB
  • USB/SD/NET MP3 playback: 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥77dB
  • 100V output: 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥77dB; total speaker load max 1000W
  • Audio decoding: 16-bit MP3/WMA/PCM up to 48kHz
  • Local storage: USB port and Micro SD slot, up to 32GB each
  • Front panel: Power switch, LED indicators, digital display and IR window, 8 buttons (USB, F1, Set, VOL-, VOL+, Next, Previous, Play/Pause)
  • Rear panel: LAN1/LAN2, USB, Micro SD, AUX IN, MIC1 pickup window, MIC2, EMC out, AUX OUT, expansion port, 100V backup input, 100V speaker output, fan, power inlet with F10AL250V fuse
  • Emergency: Emergency line input and linkage trigger for fire PA, host-controlled EMC output
  • Source priority: 7 levels or more (background, service, emergency), network-configurable
  • Expansion port: For on-demand color screens, intercom panels, Bluetooth receivers and GPS time modules; supplies DC power
  • Other functions: Offline timed playback with SD backup, clock sync with host, IR remote, watchdog, DSP bass/treble, industrial-grade components for a wide operating temperature range
  • Rated power consumption: 1300W
  • Power supply: AC220V/50Hz
  • Protection: Over-current, overheat and over-voltage
  • Display: Digital screen for clock and playback progress
  • Net weight: 6.12 kg
  • Unit dimensions (L×W×H): 483×400×44 mm

Features

  • 1000W on a 100V line: for example, 50 horn speakers tapped at 20W from one amplifier.
  • 1U chassis, 400 mm deep: a thousand watts in a single rack unit instead of two amplifiers.
  • LAN1 and LAN2 ports with fault detection: the broadcast carries on if one network path fails.
  • Emergency line input and linkage trigger for fire PA systems: emergency messages take priority over routine paging and music.
  • Offline scheduled playback from Micro SD, with MP3, WMA and PCM decoding up to 48kHz: stored programs run without the host.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌