Projector with Al Hilal logo

Car welcome light (two pieces) for the driver door and the passenger door. Installation instructions: 1. Install 3 AAA batteries (1.5 volts) in the battery box and connect the 3M adhesive strips to the projector device. (Tips: Warm the strips slightly with a hairdryer for stronger adhesion (batteries not included). 2. Stick the projector device to the lower part of the clean door panel. Press firmly for a few seconds until it sticks strongly. 3. Adjust the position of the magnet on the slightly cleaned door frame to ensure the magnet aligns with the sensor and the light works properly, then stick the magnets. How it works: Automatic control: When the door is opened, the light moves more than 2 cm away from the magnet, the lights will turn on automatically, the image will be projected onto the ground under the door, and it will turn off automatically after two minutes. When closing the door, the magnet interferes with the sensor area, and the lights will turn off automatically. Manual control: If you want to turn the light on/off, simply press the power button on top of the light. One set includes two light projectors with a car logo light display, we suggest buying two sets for your four doors. -The package includes: two lights displaying the manufacturer’s car logo.