Temporary spare part for operation

Does your water tank cooling device operate for longer hours than necessary without you noticing? Temporary operation timer for Cool Shower, designed for smart control of the water tank cooling device's running time according to a pre-set schedule, and relies on a digital adjustment system that allows setting days, hours, and minutes, with multiple operating modes such as manual and automatic operation. When setting the timer, the device only works during the periods you choose, then stops automatically without additional intervention. Cool Shower Timer Specifications Compatibility: Designed for Cool Shower water tank cooler Category: Spare parts Electrical voltage: 220 volts Operating modes: Manual operation / Automatic operation / Off Scheduling settings: Specify week, hour, minute Display: Digital display for showing settings in modes Step-by-step installation guide Disconnect the power from the cooling device before starting. Open the control unit cover and identify the connection terminals. Connect the power cable to the Power IN port. Connect the device output to LOAD OUT according to the attached diagram. Secure the timer in place and close the cover tightly. Restore power and set the time and operating schedule from the screen. Warnings during use The Cool Shower timer should not be installed while the power is connected. Ensure the voltage matches 220 volts before operation. Do not expose the timer to moisture or direct water. Do not modify internal wiring without sufficient electrical expertise. If repeated electrical fluctuations occur, it is preferable to use a voltage regulator to protect the circuit. Controlling the cooling time means directly controlling your electricity bill and device performance. Order the original timer from Cool Shower and reduce your consumption from the first day of use.