Carburetor cleaner and American gates

Carburetor cleaner foam "ABRO" CC 300 contains carburetor cleaner with solvents and penetrating agents that remove tar, hydrocarbons, and other deposits from the fuel supply system. It removes stuck valves and stuck pressure rings, and removes deposits from combustion chambers. For best results, use it with carburetor adjustment. Instructions: 1. Warm up the engine to normal operating temperature. 2. Remove the air filter, and leave the engine idling (about 750 RPM). 3. Spray the contents directly into the carburetor, choke, main throttle valve, and shafts. Spray the cleaner on the chamber walls and all contaminated surfaces. Note: After spraying, engine speed will decrease to 400-500 RPM — this is normal. 4. When the cylinder is empty, stop the engine immediately. 5. Leave it for 5-10 minutes. 6. Start the engine, open and close the throttle valve sharply (accelerate) for two minutes. 7. Replace the air filter. 8. If necessary, adjust airflow and idle speed. Precautions: Flammable. Under pressure. Harmful if swallowed or inhaled fumes. Store and use away from heat sources, fire, sparks, and at temperatures up to 48°C with adequate ventilation. Avoid contact with skin, eyes, clothing, and inhalation of fumes. If it contacts the skin, wash with water and soap, and if it contacts the eyes, rinse with water for 15 minutes. If swallowed, do not induce vomiting. If fumes are inhaled, move to fresh air; consult a doctor. Keep away from children.