Salfan 800 SC sulfur micronized, 1-liter capacity

Sulfan 800 SC Fungicide and acaricide preventive contains sulfur micronized 80% w/v as a ready suspension concentrate SC for mixing with water and spraying. Used for prevention and treatment of several important fungal diseases such as powdery mildew and rust, and also helps in reducing acarid activity when used according to label instructions and recommended doses. Sulfan 800 SC is considered a suitable option within fungal pesticide programs, especially in vegetable, fruit, and grain crops that require regular protective surface disease protection, with caution not to use it in very hot weather or with incompatible oils and compounds. Sulfan 800 SC specifications Trade name: Sulfan 800 SC Product type: Fungicide and acaricide preventive Active ingredient: Sulfur Concentration: 80% w/v Formulation: Suspension concentrate SC Method of use: Foliar spray Targeted uses: Powdery mildew, rust, and some acarid infestations according to the label Suitable crops: Vegetables, fruits, grains, and other crops according to product recommendations Volume: 1 liter Country of origin: Saudi Arabia Features of Sulfan 800 SC for powdery mildew control Helps in prevention and treatment of powdery mildew on several agricultural crops. Supports reducing rust diseases when used as part of an appropriate fungal control program. Helps repel and reduce acarid activity on the plant when used according to instructions. Its SC suspension formulation makes mixing with water easier and helps in better distribution during spraying. Suitable for regular preventive use before fungal infection worsens. Can be integrated into disease management programs to reduce plant disease pressure. Uses of Sulfan 800 SC in agricultural crops Used within agricultural pesticide programs to prevent fungal diseases that often appear on leaves, stems, and fruits, especially under humid conditions, poor ventilation, plant crowding, or repeated wetness on the vegetative parts. Used in crops such as tomatoes, grapes, potatoes, strawberries, onions, watermelons, alfalfa, and others according to label recommendations. It can also be part of an integrated protection program including improving ventilation, regulating irrigation, removing infected parts when necessary, and using suitable agricultural fertilizers to support plant strength. Method of use and spraying rate of Sulfan 800 SC Use at a rate of 200 to 300 ml per 100 liters of water, with the appropriate rate determined by the crop type, severity of infection, and advice from an agricultural specialist. Add the product to the spray tank after partially filling it with water, then stir well until the solution is homogeneous, then complete the water to the desired volume while continuing to stir during spraying. Spray the solution on the vegetative parts with focus on good coverage of the leaves, especially at the beginning of infection appearance. For better coverage, suitable spraying tools from the agricultural sprayers section or handheld sprayers can be used depending on the size of the cultivation and the nature of the crop. Appropriate spraying timing It is preferable to use Sulfan 800 SC preventively or at the first sign of infection, as early intervention usually yields better results than waiting for widespread disease. Spray early in the morning or before sunset, avoiding spraying during high heat or strong direct sunlight. Not recommended to spray in very hot weather, as sulfur may cause stress or damage to sensitive plants at high temperatures. Avoid spraying immediately before rain to maintain coverage efficiency. Pre-harvest safety period The withdrawal period before harvest typically ranges from 7 to 14 days depending on the crop. Always refer to the product label before harvesting, as the safety period may vary between tomatoes, grapes, potatoes, strawberries, onions, watermelons, alfalfa, and other crops. Precautions for using Sulfan 800 SC Do not use in very hot weather or under strong direct sunlight. Do not mix with mineral oils, oil-based compounds, or incompatible pesticides. Allow a suitable interval between sulfur and oils according to label instructions or agricultural engineer advice. It is recommended to test compatibility before mixing with other pesticides or foliar fertilizers. Wear gloves, mask, and protective clothing during preparation and spraying. Store in a dry, shaded place away from children, animals, food, and feed sources. Wash the spray tank thoroughly after use and do not discharge residues into water sources. Do not use at higher doses than recommended to avoid plant stress or undesirable effects. Benefits of micronized sulfur in plant protection Micronized sulfur helps reduce the spread of some surface fungal diseases like powdery mildew, mainly acting on the plant surface. Good coverage during spraying is crucial for treatment success. The more evenly the spray solution is distributed on the leaves, the more the plant benefits. Using sulfur as part of a balanced program helps reduce disease pressure, especially when combined with good agricultural practices such as reducing excess humidity, improving spacing, adjusting irrigation, and avoiding excessive nitrogen fertilization that increases plant susceptibility. Frequently asked questions about Sulfan 800 SC What is the active ingredient in Sulfan 800 SC? It contains sulfur at 80% w/v as a suspension concentrate. Is Sulfan 800 SC suitable for powdery mildew? Yes, it helps in prevention and treatment when used at the right time and dose. Is Sulfan 800 SC only a fungicide? It is a fungicide, and it also helps in reducing acarid activity according to product data and instructions. What is the usage rate of Sulfan 800 SC? Typically used at 200 to 300 ml per 100 liters of water depending on the crop and infection severity. Can Sulfan be mixed with mineral oils? It is not recommended to mix with mineral oils or oil-based compounds; a suitable interval should be maintained as per label instructions. When is the best time to spray Sulfan 800 SC? Preferably in the early morning or before sunset, avoiding spraying in hot weather. Marketing conclusion Sulfan 800 SC micronized sulfur is suitable for farmers needing a protective and therapeutic fungicide to help combat powdery mildew, rust, and reduce acarid activity on various crops. For best results, use early, adhere to the recommended dose, and avoid spraying in high heat or with oils. You can choose pest control and spraying supplies from Saudi Sids Store according to crop type and agricultural care program.