Warrior 10 CS insecticide non-device for pest control and worms 250 ml

Warrior 10 SC insecticide non-systemic for control of aphids and worms 250 ml Warrior 10 SC insecticide non-systemic from the group of industrial pyrethroids, contains the active substance Lambda-cyhalothrin at a concentration of 100 g/l, and comes in the form of CS suspended capsules. It is used to help control a wide range of piercing and chewing insects such as aphids, worms, whiteflies, thrips, scale insects, tunnel makers, and stem borer in field crops, vegetables, and fruit trees. Warrior works by contact and ingestion on the insect nervous system, helping to reduce pest numbers quickly when used according to the label instructions. The CS suspended capsule formulation helps improve the stability of the active ingredient on the plant and its gradual release, providing longer-lasting protection compared to some traditional formulations when the correct dose and spraying method are followed. Non-systemic insecticide for control of aphids and worms Piercing and chewing insects are among the most impactful pests on crops because they cause weak growth, leaf damage, holes in fruits, reduced crop quality, and can affect production if control is delayed. Warrior 10 SC helps control these pests when used at the beginning of infestation, especially when insects are active and exposed on the plant surface. Since Warrior is a non-systemic insecticide, the effectiveness of spraying depends heavily on good coverage. Therefore, leaves, stems, and pest aggregation areas should be well sprayed, with emphasis on the underside of leaves in cases of aphids, whiteflies, and thrips. Specifications of Warrior 10 SC Trade name: Warrior 10 SC Product type: Non-systemic insecticide Chemical group: Industrial pyrethroids Formulation type: CS suspended capsules Active ingredient: Lambda-cyhalothrin Active ingredient concentration: 100 g/l Mode of action: Contact and ingestion Odor: Weak Country of origin: Switzerland Company: Syngenta Package size: 250 ml Target pests: Aphids, worms, whiteflies, thrips, scale insects, tunnel makers, stem borer Suitable crops: Wheat, corn, barley, alfalfa, tomatoes, potatoes, onions, cucumbers, apples, pears, apricots, peaches, and other crops as per the label Features of Warrior insecticide for piercing and chewing pests - Non-systemic insecticide working by contact and ingestion. - Helps control aphids, worms, and stem borer. - Suitable for controlling whiteflies, thrips, and tunnel makers. - CS capsule formulation provides higher stability on the plant. - Gradual release technology extends the protection period relatively. - Rapid effect with clear results after treatment when coverage is good. - Suitable for integrated pest management (IPM) programs. - Relatively safe on the plant when doses and recommendations are followed. Uses of Warrior 10 SC in controlling agricultural pests Warrior 10 SC is used to control a wide range of pests affecting field crops, vegetables, and fruit trees. It is suitable when infestation results from insects feeding on leaves, sucking plant sap, or boring into stems and shoots, with the necessity of timely application and not waiting until the infestation worsens. Main uses include: - Controlling aphids in vegetables and field crops. - Controlling worms in wheat, corn, barley, and alfalfa. - Assisting in stem borer control in field crops. - Controlling whiteflies and thrips in vegetables and trees. - Helping control scale insects and tunnel makers. - Used in pest control programs for fruit trees such as apples, pears, apricots, and peaches. You can browse similar products through the agricultural pesticides section or go directly to the section of agricultural insecticides to select suitable pesticides based on pest type and crop. Method of use of Warrior 10 SC Warrior should be used according to crop type, target pest, and infestation severity, with a mandatory reading of the product label before preparation and spraying. According to the product data, the recommended doses are: - Field crops such as wheat, corn, barley, and alfalfa: 20 to 25 ml per 100 liters of water against aphids, worms, and stem borer. - Fruit trees such as apples, pears, apricots, and peaches: 20 to 25 ml per 100 liters of water against whiteflies, thrips, scale insects, and tunnel makers. - Vegetables such as tomatoes, potatoes, onions, and cucumbers: 20 to 25 ml per 100 liters of water against aphids, whiteflies, scale insects, and worms. Shake the container well before use, then add the required dose to the spray tank with an appropriate amount of water and mix well until the solution is homogeneous. Spray the plant with full coverage, especially pest areas, avoiding spraying during windy conditions or high temperatures. To improve coverage quality, use a suitable hand-held spray nozzle from the section of agricultural sprayers, or browse the section of sprayers, fertilizers, and pesticides to choose appropriate spraying tools based on the area of use. Best timing to use Warrior against aphids and worms The best timing for using Warrior is at the beginning of infestation, especially when aphid colonies are observed on new growth or signs of worm feeding on leaves and stems. Early intervention helps reduce pest spread before populations increase or larvae become difficult to reach. Spray early in the morning or before sunset, avoiding high temperatures and strong winds. Also, ensure good coverage of the plant because the product is non-systemic and depends on reaching the insects or their feeding areas with the spray. Pre-harvest interval (PHI) Adhere to the pre-harvest interval before harvesting or marketing the crop. According to the product data: - Grains and alfalfa: 21 days. - Vegetables: 15 days. - Fruit trees: 28 days. - Tomatoes: 10 days. Always refer to the product label to confirm the safety period for each crop and do not harvest before the specified period ends. Precautions for using Warrior 10 SC - Read the entire product label before preparation and use. - Wear gloves, mask, and protective glasses during spraying. - Avoid inhaling spray mist or contact with the solution on skin and eyes. - Do not eat, drink, or smoke during use. - Wash hands and face thoroughly after spraying. - Avoid spraying during windy conditions or high temperatures. - Do not use a dose higher than recommended. - Do not mix the product arbitrarily with other pesticides or fertilizers without checking compatibility. - Keep away from children, animals, food, and feed. - Store in its original container away from heat and direct sunlight. - Do not reuse the empty container for other purposes and dispose of it safely. - Follow the pre-harvest interval according to the crop type. Resistance management Since Warrior belongs to the group of industrial pyrethroids, it is not recommended to use it repeatedly throughout the season. It is best to include it in an integrated pest management program that involves rotating chemicals from different groups, early pest monitoring, improving spray quality, and only using the pesticide when necessary. This approach helps maintain the effectiveness of the pesticide and reduces the chances of resistance development, especially for pests like aphids, whiteflies, and thrips, which can reproduce rapidly under suitable conditions. Frequently Asked Questions about Warrior 10 SC Is Warrior suitable for controlling aphids? Yes, Warrior helps control aphids when used at the recommended dose and with good coverage, especially at the beginning of infestation. Does Warrior fight worms? Yes, Warrior is used to help control worms in field crops and vegetables according to doses and label instructions. Is Warrior a systemic insecticide? No, Warrior is a non-systemic insecticide that works by contact and ingestion, so its effectiveness depends on good coverage during spraying. What is the active ingredient in Warrior 10 SC? Warrior contains the active ingredient Lambda-cyhalothrin at 100 g/l. What is the dose of Warrior per 100 liters of water? The recommended dose is 20 to 25 ml per 100 liters of water depending on crop type and target pest. What is the benefit of the CS formulation in Warrior? The CS formulation means suspended capsules, which help better stability of the active ingredient on the plant and a gradual release that may extend the protection period when used correctly. Warrior 10 SC for controlling piercing and chewing insects Warrior 10 SC is a suitable option within pest control programs for piercing and chewing insects such as aphids, worms, whiteflies, thrips, tunnel makers, and stem borer. The product helps reduce pest numbers when used early and at the correct dose, with good coverage, adherence to pre-harvest intervals, and rotation of pesticides to reduce resistance risks. You can browse more pest control products and spraying supplies through the Saudi Seeds store and choose the appropriate product based on pest type and crop. Ortho Super 5% SC acaricide for red spider mite 1 liter