Light-activated trap for flying insects Model 7217

Light trap adhesive for insect control Model 7217 Light trap adhesive Model 7217 dedicated to insect control, flies, mosquitoes, flying insects inside places in a clean and quiet way, relying on ultraviolet light UV-A technology to attract flying insects, then they are captured on an internal adhesive board without electric shock or insect debris scattering. Model 7217 features a strong structure made of stainless steel 201 resistant to rust, with a design suitable for continuous use in medium and large indoor locations. The coverage range reaches approximately 100 square meters depending on the nature of the place, light distribution, insect density, and air movement inside the site. What is the light insect trap Model 7217? Model 7217 is an indoor device for flying insect control, working by attracting flies, mosquitoes, and flying insects with UV-A light, then fixing them on a 27 × 39 cm internal adhesive board. This system makes it suitable for places that need clean control without pesticides, without odors, and without electric shock sounds. This trap is a practical option for kitchens, shops, service areas, warehouses, restaurants, cafes, and food preparation sites, as it helps reduce flying insect activity and monitor the level of infestation inside the place. It can be classified under the section of light insect traps, with the possibility of using alternative boards from the section of adhesive boards for light traps. Features of Model 7217 trap The trap features UV-A technology that helps attract flying insects inside the place, then they are captured on the internal adhesive board in a way that prevents falling or scattering of insects. Therefore, it is suitable for places that require a higher level of cleanliness compared to traditional electric shock traps. The device's structure is made of stainless steel 201, which provides good durability and a suitable appearance for commercial and professional use. This makes the trap suitable for locations that require continuous operation, such as commercial kitchens, shops, warehouses, and service areas. An important feature is that the device operates without pesticides, odors, or disturbing noise, making it suitable for indoor use, especially in places where spraying chemicals or using electric shock devices is not preferred. Specifications of the light adhesive trap Model 7217 Property | Details ---|--- Product name | Light trap adhesive for flying insects Model | 7217 Type | Light trap adhesive Frame material | Stainless steel 201 Working method | Attraction by UV-A light then capture on adhesive board Lighting type | UV-A Electrical power | 14 watts Voltage | AC 220-240V Frequency | 50-60Hz Coverage area | Up to approximately 100 square meters Internal adhesive board size | 27 × 39 cm Dimensions | Width 63 cm × Height 30 cm × Depth 8 cm Use | Indoor only Country of manufacture | China Warranty | Two years on sensor and internal device How to use Model 7217 trap The trap is mounted on the wall or in a fixed place inside the protected site, preferably near the movement of flying insects but away from strong light sources that may reduce the attraction of insects to the device. It is recommended to install the trap at a height of about 1.5 to 2 meters from the ground, avoiding direct air currents such as air conditioners or fans. It should also be kept away from direct sunlight and brightly lit windows, as external light strength may affect the trap's performance. After installation, the device is plugged in to start working automatically. The internal adhesive board should be checked periodically and replaced when full of insects or when the adhesion strength decreases due to dust or long-term use. Where is Model 7217 trap used? Suitable for medium and large indoor places with noticeable flying insect activity, such as commercial kitchens, restaurants, cafes, shops, warehouses, service areas, preparation rooms, and some indoor storage sites. It can also be used in sites that require continuous monitoring of fly and flying insect activity. When the adhesive board fills quickly, it indicates a source of attraction or entry of insects, such as unsealed openings, many open doors, debris, humidity, or exposed food materials. Why is the adhesive trap a suitable option for indoor places? Adhesive traps are suitable for places that need clean insect control because they do not rely on electric shock, do not scatter insect debris, and do not require spraying pesticides inside the site. This makes them appropriate for environments concerned with operational cleanliness such as restaurants, kitchens, shops, and storage areas. Having the adhesive board inside the device helps monitor the level of infestation. If the board fills quickly, it indicates that the site needs to address the source of the problem, not just change the board or turn on the device. Tips for optimal performance For the best results, it is recommended to operate the trap during flying insect activity hours and keep it running continuously in places with repeated fly or mosquito activity. It should be placed away from strong lighting and not directly in front of air currents. Do not rely solely on the trap if the infestation is high. Reduce attraction sources inside the place, such as food residues, waste, stagnant water, open doors, and unsealed openings. You can browse the flying insect pesticides section for additional solutions suitable for the place's nature, while following usage and safety instructions. Important notes The trap is designed for flying insects only and is not used for crawling insects like cockroaches or ants. It is intended for indoor use only and should not be used outdoors or in exposed areas to rain or high humidity. Electricity should be disconnected before cleaning, replacing the adhesive board, or handling internal parts. Use a suitable adhesive board for the device size to maintain trapping efficiency and ease of maintenance. Frequently Asked Questions Is Model 7217 trap an electric shock device? No. It is a light adhesive trap that attracts flying insects with UV-A light and captures them on an internal adhesive board without electric shock. Is it suitable for restaurants and kitchens? Yes, suitable for indoor restaurants, kitchens, and service areas; it works without pesticides, odors, or scattering insect debris, with proper placement away from direct food preparation areas. How much area does the trap cover? According to product data, it covers up to approximately 100 square meters, but efficiency may vary depending on distribution, lighting, air movement, and insect density. When should the adhesive board be changed? It should be changed when full of insects or when the adhesion strength decreases. The change rate varies depending on insect density, dust, humidity, and device operation duration. Does it work for crawling insects? No. The trap is designed for flying insects only, such as flies, mosquitoes, and some light-attracted insects, not for cockroaches, ants, or crawling insects. Summary of the product The light adhesive trap Model 7217 is a practical indoor device for controlling flies, mosquitoes, and flying insects in a clean and quiet way. It operates with UV-A technology with an internal adhesive board measuring 27 × 39 cm, made of corrosion-resistant 201 stainless steel, and covers approximately 100 square meters, making it suitable for kitchens, shops, warehouses, restaurants, and service areas as part of a continuous insect control and monitoring program. Related sections Light insect traps, insect traps, adhesive boards for light traps, spare parts for light insect traps, pest control devices, flying insect pesticides, pest control equipment. Light adhesive trap Model 7207 for flying insects