Gasoline firewood saw, two-stroke, Granada brand, Chinese, 40 cm, model 180

Gasoline firewood saw GRANADA 40 cm for outdoor work Gasoline firewood saw GRANADA model 180 is a practical chainsaw dedicated to cutting firewood and wood and pruning works outdoors in farms, gardens, and lounges. It operates with a 2T gasoline engine, and comes with a 16-inch cutting blade approximately 40 cm long, making it suitable for tasks requiring higher power than manual saws. This saw is suitable for those looking for a practical tool within the agricultural tools category, especially when needing to cut firewood or prune some woody branches in open areas where a nearby power source is not available. Features of GRANADA gasoline double-stroke chainsaw - 2T gasoline engine suitable for outdoor cutting works. - Chain and cutting blade 16 inches long, about 40 cm. - Operates without electricity, making it suitable for farms and lounges. - Separate oil tank helps lubricate the chain during operation. - Chain brake to enhance safety during use. - Double handle design helps control and stability during cutting. - Suitable for cutting firewood, wood, and medium pruning works. Specifications of GRANADA model 180 chainsaw - Product type: gasoline firewood chainsaw / chainsaw. - Brand: GRANADA. - Model: 180. - Engine type: 2T gasoline double-stroke. - Blade length: 16 inches, about 40 cm. - Cutting system: chain for firewood and wood. - Safety system: chain brake. - Lubrication system: dedicated oil tank for chain lubrication. - Fuel type: gasoline mixed with 2T oil. - Operation method: manual start with cord. - Country of origin: China. Uses of gasoline chainsaw in farms and gardens GRANADA chainsaw is used for cutting firewood, chopping wood, pruning thick branches, and preparing wood in farms, lounges, and large gardens. It is also useful for outdoor maintenance within lawn equipment and garden landscaping when dealing with woody branches or pruning debris. For lighter pruning or small branches, suitable cutting tools can be chosen from the agricultural tools section, while the gasoline chainsaw is more appropriate when the wood thickness is greater or when higher cutting power is required. How to prepare the fuel mixture for a 2T firewood chainsaw The chainsaw uses a gasoline mixture with oil designated for 2T engines. The ratio mentioned in the product data is 25:1. Practically: every 1 liter of gasoline is mixed with about 40 ml of 2T oil. Mix the fuel and oil well before filling the chainsaw tank. Fill the chain oil tank with suitable lubricating oil before operation. Do not run the chainsaw without chain oil to avoid damaging the chain and bar. How to safely use the GRANADA firewood chainsaw - Check the chain, bar, and chain oil level before starting. - Ensure the chain is properly tightened without excess. - Operate the chainsaw in an open, well-ventilated area. - Hold the chainsaw with both hands during work and do not use with one hand. - Start cutting gradually and avoid excessive pressure on the chain. - Use protective glasses, gloves, and suitable work shoes. - Turn off the engine before cleaning the chain or removing wood residues. Maintenance of gasoline chainsaw and chain after use To maintain the chainsaw’s performance, it is recommended to clean the chain and bar after use, check chain tension, and ensure sufficient lubrication oil each time. It is also advised to store the chainsaw in a dry place away from moisture, and review consumable parts when needed from the spare parts and maintenance section. Important warnings before using the firewood chainsaw This product is intended for outdoor cutting works and requires careful use. It should not be used indoors due to gasoline engine exhaust, nor on metallic or stone materials. Avoid cutting above shoulder level, stay away from people and animals during operation, and follow the instructions in the user manual. Frequently asked questions about the GRANADA 40 cm firewood chainsaw Is the GRANADA chainsaw suitable for cutting firewood? Yes, the chainsaw is suitable for cutting firewood, wood, and outdoor pruning works, provided it is used within its capacity and safety guidelines. Does it operate on electricity or gasoline? It runs on gasoline via a 2T double-stroke engine, making it suitable for outdoor areas without an electrical outlet. Does it need special oil? Yes, it requires 2T oil mixed with gasoline, in addition to oil designated for chain lubrication inside the chain oil tank. A practical gasoline chainsaw for cutting firewood and wood If you are looking for a gasoline firewood chainsaw with a 40 cm blade for use on the farm, lounge, or garden, the GRANADA model 180 provides a practical option for outdoor cutting works. You can order it from the Saudi Seeds store within the agricultural tools and garden care section.