Light trap sticker for flying insects control Model 6025

A cling light trap Aseel 6025-AS for fighting flying insects | ASEEL 6025-AS Glue Light Trap The Aseel adhesive light trap model 6025-AS is an practical and professional choice for fighting flies, mosquitoes, and flying insects inside enclosed places, especially in locations that require a high level of cleanliness such as restaurants, kitchens, food factories, supermarkets, stores, warehouses, and homes. The trap relies on attracting flying insects using UV-A LED lighting, then fixing them on an internal sticky board without electric shock and without scattering insect remains. Therefore, it is suitable for sensitive environments where the use of traditional electric shocks or chemical pesticides is not preferred, especially near food preparation areas or places that require a clean appearance and quiet operation. Description of the Aseel 6025-AS adhesive light trap The Aseel 6025-AS electric insect trap is designed to provide a clean indoor solution to help reduce the spread of flies, mosquitoes, and flying insects inside facilities. The device works with a light attraction system, where insects are attracted to the light source and then stick to the internal trap board. The most important feature of this type of trap is that it does not rely on electric shock, thus it does not produce popping sounds or scattering remains of insects inside the place. This makes it more suitable for restaurants, cafes, bakeries, commercial kitchens, and food establishments compared to some traditional shock devices. The device also comes with a stainless steel 201 metal frame, giving it a professional appearance and durability suitable for daily use. It is wall-mounted to save space and not obstruct movement inside the place. Specifications of ASEEL 6025-AS insect trap Specification | Details --- | --- Type | Electric sticky insect trap Brand | ASEEL Model | 6025-AS Operation system | UV-A LED light attraction + internal sticky board Light source | UV-A LED Number of lamps | 2 × 7 watts Electrical capacity | 14 watts Voltage | 220 - 240 volts Frequency | 50/60 Hz Approximate coverage | Up to 100 square meters per device depending on site conditions Material | External structure made of stainless steel 201 Installation method | Wall mounting Usage area | Indoor only Country of manufacture | China Dimensions | Width 48 cm × Height 28 cm × Depth 9 cm Features of the Aseel 6025-AS adhesive light trap The Aseel 6025-AS trap is characterized by being designed for indoor use in sensitive and food-related places, helping to combat flies, mosquitoes, and flying insects in a clean way without using pesticides or chemicals. Its main features include working with a light attraction system combined with an internal sticky board, which reduces the scattering problem of insects that may occur in traditional shock devices. It also operates quietly and does not produce unpleasant odors, making it suitable for places that receive customers or operate for long hours. The metal structure made of stainless steel gives the device a suitable appearance for restaurants and commercial establishments, and the wall-mounted design helps fix the trap in a high place without occupying floor space or hindering workers and customers. Places where the adhesive insect trap can be used The Aseel adhesive light trap can be used in a wide range of locations, including: - Restaurants and commercial kitchens, helping to monitor and reduce the number of flies and flying insects without using chemicals inside the food environment. - Supermarkets and stores, especially in sections that may be affected by flying insects such as vegetables, fruits, bakeries, and storage areas. - Food factories and warehouses, where it can be used as part of pest control and periodic monitoring programs. - Homes, villas, and lounges, especially in kitchens, internal entrances, and places where flies or mosquitoes frequently appear. - It can also be used in indoor areas connected to gardens or entrances, provided the device is protected from direct rain and humidity, as it is meant for indoor use only. How to install the Aseel 6025-AS trap For better performance, it is preferred to install the device on the wall at a height between 2 to 2.5 meters from ground level, choosing a suitable location away from direct strong light sources that may reduce the effectiveness of attracting insects to the trap. It is recommended not to install the trap directly above food preparation areas or open production lines, even though it is a sticky trap without shock; better to place it along the insect movement path or near internal entrances, windows, and fly gathering areas. After installing the device, connect it to electricity and turn it on. The UV-A LED light will attract flying insects, which will stick to the internal sticky board. The board should be checked periodically and replaced when full or when its adhesion efficiency decreases. Coverage and recommended number of devices The trap covers approximately 80 - 100 square meters per device, but actual coverage may vary depending on site distribution, ceiling height, number of entrances, insect density, ambient light strength, and overall cleanliness. For example, if a restaurant or food facility area is about 600 square meters, it may often require 6 or 7 devices distributed strategically to achieve better coverage, instead of relying on a single device in a distant corner. For the best results, consider not only the area but also points of insect entry and gathering areas such as doors, windows, internal waste areas, warehouses, and loading entrances. Sticky board replacement rate Under normal usage conditions, the sticky board can be replaced about once a month. However, in places with high fly, mosquito, or insect density, the board may need to be replaced sooner. It is advised to replace the board immediately when it is full of insects or when its adhesion ability decreases. Dust, humidity, and temperature can also affect the efficiency of the sticky board, so it is recommended to check it regularly as part of maintenance. Why is the adhesive trap suitable for food places? Food environments require pest control solutions that do not cause visual contamination or scattering of insect remains. Here, the benefit of the adhesive light traps appears, as they attract insects and fix them inside the device on the sticky board instead of electrocuting them in the air. This makes them suitable for restaurants, bakeries, central kitchens, and food factories, especially when part of an integrated pest control program that includes cleanliness, closing entrances, installing air curtains or suitable screens, and proper waste management. Important warnings before use The Aseel 6025-AS trap is intended for indoor use only and should not be exposed to rain, direct washing, or high humidity. The device should be unplugged before cleaning or replacing the sticky board. Use appropriate sticky boards for the device size to ensure good performance. Avoid installing the device in places exposed to direct sunlight or very strong lighting, as this may reduce the attraction of insects to the UV-A light. Follow the installation and maintenance instructions provided with the product. Frequently asked questions about the Aseel adhesive light trap Does the trap use pesticides? No, the trap works with a light attraction system and an internal sticky board, and does not rely on pesticides or chemicals. Does it electrocute insects? No, this model is sticky and not a shock device; insects stick to the internal board without being electrocuted or scattering. Is it suitable for restaurants? Yes, it is suitable for restaurants, kitchens, and food establishments because it works in a clean and quiet manner, with proper placement away from direct food preparation areas. What is the coverage area? It approximately covers up to 80 - 100 square meters per device, depending on site conditions, insect density, and distribution method. When should the sticky board be changed? Usually once a month under normal use, or immediately when full of insects or when its adhesion decreases. Related sections For similar or complementary solutions, visit the Light Insect Traps section, Electric Light Traps section, Sticky Light Trap Boards section, as well as the Pest Control Equipment section. You can also browse broader solutions within the Pest and Rodent Control section and the Flying Insect Pesticides section when an integrated pest control program is needed. Summary The Aseel 6025-AS adhesive light trap is suitable for those seeking a clean, quiet indoor device to fight flies, mosquitoes, and flying insects, especially in places that require a high level of cleanliness such as restaurants and food facilities. Thanks to its wall-mounted design, metal structure, and non-shock adhesive system, the trap provides a practical solution for daily use within indoor pest control programs.