IGEBA fog machine device with 6-liter capacity model TF35 E

IGEBA TF35 E Hot Fogging Machine Device with 6-liter capacity IGEBA TF35 E is a professional hot fogging device dedicated to fighting flying insects and pests in open and closed spaces, used in public health work, gardens, farms, warehouses, residential areas, and pest control sites that require wide and rapid coverage. The device features high manufacturing quality and operational standards suitable for professional use, with a strong ability to produce dense fog that helps distribute the pest control solution efficiently within the work area. Suitable for users seeking a portable fogging machine within the fogging machine category, especially in combating mosquitoes, flies, and flying insects when using the appropriate pesticide and following operating and safety instructions. It can also be relied upon in pest control programs in facilities, farms, and open areas that require a practical, high-performance, and easily portable device. What is the IGEBA TF35 E device? The IGEBA TF35 E is a portable thermal fogging machine that converts the used solution into fine, dense fog, helping the pest control solution reach targeted spaces, corners, and insect gathering areas. The device works with oil-based and water-based solutions depending on the nature of the use and the type of pesticide or disinfectant used. This type of device is a suitable option among pest control equipment because it combines combustion power, relatively lightweight, and ease of operation, making it suitable for field teams, pest control companies, and agencies implementing periodic spraying programs. Features of the IGEBA TF35 E thermal fogging machine The IGEBA TF35 E fogging machine has several practical features that make it suitable for professional use, including: - Strong combustion capacity up to 18.7 kW / 25.4 HP - Effective horizontal range up to 40 meters for oil-based solutions and 8 meters for water-based solutions - Practical solution tank with 6.5-liter capacity - Fuel tank with 1.2-liter capacity - Durable stainless steel body with relatively low weight for easy field handling - Average flow rate up to 20 liters/hour for oil-based solutions - Maximum flow rate up to 42 liters/hour depending on the type of solution and nozzle operation - Reliable ignition system that does not require a spark plug - Easy to operate and use compared to large mounted devices - Optional accessories such as a 10-liter stainless steel tank or a curved fog pipe can be added as needed Suitable uses The IGEBA TF35 E can be used in several professional applications, including: - Mosquito control in gardens, farms, and open areas - Fly and flying insect control in warehouses and public facilities - Used within mosquito control pesticide programs when selecting the appropriate pesticide - Supporting fly control work within fly pesticide categories - Use in sites requiring quick-dispersing thermal fog - Flying insect control within flying insect pesticide programs - Professional use in public health pesticide work - Supporting pest control programs in farms and agricultural areas when used with suitable solutions Technical specifications Item | Specification ---|--- Product Name | IGEBA TF35 E hot fogging machine Device Type | Portable thermal fogging machine Use | Mosquito, fly, and flying insect control Dimensions | 136 × 27 × 34 cm Empty weight | 7.9 kg Solution tank capacity | 6.5 liters Fuel tank capacity | 1.2 liters Flow rate for oil-based solutions | Average 20 liters/hour, up to 42 liters/hour maximum Flow rate for water-based solutions | Up to 10 liters/hour Horizontal spraying range | 40 meters for oil-based solutions, 8 meters for water-based solutions Fuel consumption | Approximately 1.2 liters/hour Power source | 4 batteries 1.5V LR20 or LR6 optional Internal pressure in solution tank | Approximately 0.25 bar Operation method | Manual ignition thermal fogging How to use the IGEBA TF35 E device The thermal fogging machine is operated after filling the fuel tank with pure gasoline and filling the solution tank with the pesticide or disinfectant required, whether oil-based or water-based, fully adhering to the manufacturer's instructions and the pesticide label instructions. Before operation, ensure the tanks are tightly closed, the nozzle is intact, batteries are ready, and there are no leaks in fuel or solution. Then, operate the device in a well-ventilated area, gradually direct the fog towards the target area, considering wind direction and avoiding directing fog towards people, animals, or open food and water sources. For better results in flying insect control, it is often recommended to use the device early in the morning or before sunset, as some insects like mosquitoes are more active during these times, and wind conditions are usually more stable. Safety instructions and warnings When using a hot fogging device like the IGEBA TF35 E, it should be handled as a professional device requiring proper care and correct operation. Therefore, the following is recommended: - Read the operation manual before use - Use only suitable pesticides or disinfectants for thermal fogging devices - Do not mix pesticides or solutions randomly - Follow the dilution ratios written on the pesticide label - Wear protective gear such as gloves, appropriate mask, and safety glasses - Do not operate near flames or flammable materials - Do not use in enclosed spaces without adequate ventilation - Keep children and animals away from the spraying area - Do not direct fog towards people, food, or water tanks - Clean the device after use according to the company's instructions to maintain efficiency - Drain and clean the tank after work, especially when using different solutions Why choose the IGEBA TF35 E fogging machine? Choosing a professional thermal fogging machine depends on several factors: device power, fog spread range, manufacturing quality, ease of operation, and usability in multiple sites. The IGEBA TF35 E offers a good balance of these elements, providing strong combustion capacity, wide spray range for oil-based solutions, and a manageable weight for field handling. Its use is not limited to one site; it can operate in gardens, farms, warehouses, open areas, and facilities that require periodic flying insect control. Therefore, it is suitable for those seeking a professional device within pest control equipment solutions, spare parts, or advanced pest control programs relying on thermal devices instead of traditional spraying. Frequently Asked Questions Is the IGEBA TF35 E suitable for mosquito control? Yes, the device is suitable for mosquito control when using a dedicated pesticide and following the label and correct operation instructions. Does the device work with water-based and oil-based solutions? Yes, it can be used with both types depending on the solution and operating instructions, with differences in spread range and flow rate between them. What is the horizontal spray range of the device? It reaches approximately 40 meters with oil-based solutions and about 8 meters with water-based solutions, depending on operating conditions and solution type. Is the device suitable for use inside warehouses? Yes, it can be used in warehouses with proper ventilation and safety instructions, ensuring the area is cleared of people and exposed food during operation. Does the device require experience to operate? The device is relatively easy to use but is a professional device, so reading the manual and following safety instructions before use is necessary, especially when handling fuel and pesticides. Related sections You can browse related sections within the Saudi Sidz store such as: fogging machines, pest control devices and equipment, ULV fogging and spraying devices, public health pesticides, mosquito pesticides, fly pesticides, and flying insect pesticides. Conclusion If you are looking for a professional thermal fogging machine for controlling mosquitoes, flies, and flying insects, the 6-liter capacity IGEBA TF35 E provides strong performance and wide solution dispersion, with a practical design suitable for professional use in gardens, farms, warehouses, and open areas. It is a suitable option for entities needing a portable fogging device that combines efficiency, ease of operation, and reliability in field pest control work.