Tiller 480 SL herbicide general 5 liters

Tiller 480 SL broad-spectrum non-selective herbicide 5 liters Tiller 480 SL broad-spectrum non-selective herbicide device used to control annual and perennial narrow and broad weeds in agricultural lands, farms, uncultivated areas, around irrigation channels and drains when used according to label instructions. The product contains the active ingredient glyphosate IPA at 48% weight/volume, in a concentrated liquid form soluble in water SL. Tiller 480 SL works by absorption through the leaves of growing weeds then transfer inside the plant to the growth areas and roots, helping to gradually stop weed growth. It is considered one of the herbicide products suitable when there is a need for general weed control before planting or in places where plant growth is not desired. A broad-spectrum systemic herbicide to control weeds Weeds are among the most problems affecting field management efficiency because they compete with crops for water, nutrients, and light, and may hinder agricultural operations or be a refuge for some pests. Therefore, using a systemic herbicide like Tiller 480 SL helps control growing weeds when sprayed at the right time and on active growth. Since Tiller is a non-selective herbicide, it does not distinguish between weeds and desired plants, so it must be used very carefully, avoiding spray solution contact with crops, trees, or plants to be preserved. It can be integrated into agricultural pesticide programs for weed management in farms and uncultivated areas. Tiller 480 SL specifications Product name: Tiller 480 SL Type of product: broad-spectrum non-selective herbicide Active substance: glyphosate IPA Active concentration: 48% weight/volume Formulation: concentrated liquid soluble in water SL Mode of action: systemic, absorbed through leaves and transferred inside the plant Target weeds: annual and perennial narrow and broad weeds Uses: before planting, uncultivated lands, around drains and irrigation channels, and between trees, avoiding contact with green parts. Country of origin: Saudi Arabia Capacity: 5 liters Features of Tiller 480 SL for weed control Helps combat annual and perennial narrow and broad weeds. Systemic herbicide that moves from leaves to growth areas and roots. Non-selective and affects most types of growing weeds. Does not leave a persistent residue in the soil that prevents subsequent planting when used correctly. Suitable for use before crop planting or in uncultivated areas. Water-soluble and easy to prepare with spraying equipment. Can be used in weed management programs around irrigation channels, drains, and agricultural pathways. Helps reduce weed density and improve land readiness for agricultural operations. Tiller broad-spectrum herbicide uses Tiller 480 SL is used to control weeds before planting, sprayed on growing weeds then left enough time for it to transfer inside the weed and show its effect. It can also be used in uncultivated lands, pathways, field edges, and around irrigation channels and drains when weed growth needs to be limited. In orchards or between trees, caution should be taken to prevent spray contact with green leaves, branches, or young trunks, as the product is non-selective and may harm desired plants. Therefore, directed spraying is preferred, avoiding drift, especially with wind. To achieve proper coverage and reduce wastage, tools from the spray equipment section and agricultural spraying equipment can be used, adjusting nozzles to produce a suitable spray that reaches weed leaves without touching non-target plants. How to use Tiller 480 SL Always adhere to label instructions and specified doses according to weed type, infestation severity, and site conditions. According to product data, the general usage method is as follows: used at a rate of 2 to 4.3 liters per hectare depending on weed severity and type. Added to 200 to 300 liters of water per hectare depending on the spraying system used. It is recommended to spray when weeds are at full growth stage for better effectiveness. Avoid watering or rainfall for at least 6 hours after spraying. Spray only on weeds, avoiding contact with crops or desired plants. The success of application depends on weed activity at the time of spraying, so it is not recommended to use on stressed weeds due to drought, extreme heat, or cold, as absorption and transfer inside the plant may be less efficient. Harvest interval According to product data, the following pre-harvest intervals must be observed: Vegetables and cotton: 7 days. Grapes: 21 days. Non-edible plants: no specific interval. Always refer to the product label before use, especially when applied near food crops or in fruit orchards. Precautions for using non-selective herbicide Tiller Read the entire product label before preparation and use. Do not use on growing crops or desired plants. Avoid spray contact with green leaves, branches, or young trunks. Do not spray during windy conditions to prevent drift. Do not use contaminated spraying equipment on sensitive crops before thorough cleaning. Do not mix with herbicides containing heavy metals or oils unless compatibility is confirmed. Wear gloves, mask, and protective clothing during preparation and spraying. Store in a dry, shaded place away from heat and out of children's reach. Clean spraying equipment thoroughly after use. Avoid spraying if rain is expected within a few hours after application. Why use Tiller 480 SL in weed management? Tiller 480 SL is suitable when the problem is the presence of growing weeds requiring general control before land preparation or in uncultivated areas. Due to its systemic effect, it not only burns the visible parts but also moves inside the weed when absorption conditions are suitable, helping to limit regrowth from some plant parts. However, it must be used precisely because it is a non-selective herbicide. The best results are achieved by carefully selecting the spraying area, timing, using calibrated equipment, and avoiding drift toward crops. It is also recommended to integrate it into an integrated weed management program that includes hoeing, reducing weed seeds, cleaning field edges, and periodic follow-up before weeds spread densely. Frequently Asked Questions about Tiller 480 SL Is Tiller 480 SL a broad-spectrum herbicide? Yes, Tiller 480 SL is a broad-spectrum non-selective herbicide for controlling annual and perennial narrow and broad weeds. What is the active ingredient in Tiller 480 SL? It contains glyphosate IPA at 48% weight/volume in a water-soluble concentrated liquid. Can Tiller be used before planting? Yes, it can be used before planting to control emerging weeds, with an appropriate interval before agricultural operations according to the label's recommendation. Does Tiller affect crops? Yes, because it is non-selective and may harm crops and desired plants if it contacts their leaves or green parts. When do results from Tiller appear? Symptoms gradually appear depending on weed type and weather conditions, and the product needs time for absorption and transfer inside the plant. Related sections To manage weeds before planting and in uncultivated areas, you can browse the herbicide section, and you can also view the agricultural pesticides section to choose suitable weed control products based on the problem's nature. To execute spraying accurately and reduce drift, suitable products are available in the spray equipment and agricultural spraying tools section. The Saudi Seeds store also offers various agricultural supplies for farm care, weed, and pest control. Telstar 100 EC acaricide and mite control 1 liter