Cyber Max 100 EC insecticide for controlling aphids, worms, stem borer, and thrips 1 liter

Cyper Max 100 EC Insecticide for controlling aphids, worms, stem borer, and thrips 1 liter Cyper Max 100 EC broad-spectrum insecticide containing the active ingredient Cypermethrin 10% from the Pyrethroids group, and used to assist in controlling a number of biting and sucking insects in cereal and forage crops, such as aphids, worms, stem borer, and thrips, when used according to the label instructions and agricultural specialist recommendations. The product works by contact and ingestion, making it suitable for active insects on the plant or feeding on parts of the crop. The 1-liter package comes in a concentrated emulsifiable formulation, facilitating preparation and spraying within pest control programs. Description of Cyper Max 100 EC will be developed to be a practical insecticide for farmers who need to control a range of pests affecting field crops, especially pests that cause direct damage to leaves, stems, and new growth. The presence of insects like aphids and thrips may weaken plant growth due to sap absorption, while worms and stem borers can cause more severe damage if control is delayed or neglected. The product relies on Cypermethrin at 10%, an active ingredient from the Pyrethroids group, which acts on insects upon contact or ingestion during feeding. Therefore, good coverage during spraying is a key factor in increasing the product's efficiency, especially since it is not systemic and does not move inside the plant. Basic specifications Product name: Cyper Max 100 EC Type of product: Broad-spectrum insecticide Active ingredient: Cypermethrin Concentration: 10% Chemical group: Pyrethroids Formulation: Emulsifiable concentrate (EC) Capacity: 1 liter Mode of action: Contact and ingestion Target pests: Aphids, worms, stem borer, thrips, and biting and sucking insects Suitable crops: Wheat, barley, corn, and clover according to label instructions Country of origin: Saudi Arabia Pre-harvest interval: 14 days before harvest according to available data Advantages of Cyper Max 100 EC Helps control a wide range of biting and sucking insects. Contains Cypermethrin 10% from the Pyrethroids group. Works by contact and ingestion, supporting rapid effect upon reaching the insect. Suitable for cereal and forage crops such as wheat, barley, corn, and clover. Assists in controlling aphids, thrips, worms, and stem borer according to label instructions. Emulsifiable formulation facilitates mixing with water and preparation for spraying. 1-liter packaging is suitable for agricultural use depending on the treated area. Can be integrated into integrated pest management programs with rotation of pesticides to reduce insect resistance. Suitable uses Cyper Max 100 EC is used in field crops and forage crops when biting or sucking insect infestations appear. It is especially suitable in cases where pests like aphids and thrips are present on the foliage, or when worms and stem borer cause direct damage to plant parts. Crops listed in the product data include: wheat, barley, corn, and clover. Always ensure that the crop and pest are included in the label recommendations before use, as pest control chemicals must be applied according to registrations and recommended doses only. Method of use Cyper Max 100 EC is used after dilution with water according to the dose specified on the label. The spray solution is prepared in a clean sprayer, then the required amount of insecticide is added to part of the water, followed by filling the tank with water while stirring well to ensure uniformity. Spraying is preferred at the onset of infestation or when pests reach a level requiring control. The spray should be directed toward pest locations, with good coverage of leaves, stems, and affected growths. Avoid spraying during strong wind or high temperatures to prevent reduced effectiveness or drift. Usage rate and pre-harvest interval Based on available data for the product: Use at a rate of 0.5 to 0.7 liters per hectare. Or at a rate of 50 to 70 ml per 100 liters of water depending on the spraying method and pest type. Pre-harvest interval: 14 days before harvest. Always confirm the final dose from the label before use, as it may vary depending on the crop, pest type, severity of infestation, and vegetative growth size. Safety precautions Read the entire label before use. Use under the supervision of a qualified technician, especially for commercial crops. Do not use the product on crops not listed on the label. Do not spray randomly without assessing the infestation level. Use gloves, mask, goggles, and protective clothing during preparation and spraying. Avoid contact with skin or eyes or inhaling spray mist. Do not spray during strong wind or high temperatures. Avoid spraying during bee activity or near water sources. Do not mix with other pesticides or fertilizers unless permitted by the label. Store the container in a cool, dry place, away from children, animals, food, and forage. Do not reuse the empty container for other purposes. Why is Cyper Max used in pest control programs? Insect pests in cereal and forage crops require continuous monitoring, as some insects like aphids and thrips can spread quickly on new growth, while worms and stem borer cause direct damage that can affect plant density and crop quality. Using an insecticide like Cyper Max 100 EC helps reduce infestation pressure when applied at the right time and dose. However, it is not recommended to rely solely on the same chemical group; rotation of active ingredients and field monitoring are essential for precise intervention timing. Related sections You can browse nearby and complementary products through the following Saudi Sites sections: Agricultural insecticides, Pest control, Agricultural pesticides, and Agricultural sprayers, fertilizers, and pesticides. Frequently Asked Questions What is Cyper Max 100 EC used for? It is used to help control aphids, thrips, worms, stem borer, and biting and sucking insects in some cereal and forage crops. What is the active ingredient in Cyper Max? It contains Cypermethrin at 10%. Is Cyper Max systemic? No, it works by contact and ingestion, so good coverage during spraying is necessary. What is the usage rate of Cyper Max 100 EC? The rate is 0.5 to 0.7 liters per hectare, or 50 to 70 ml per 100 liters of water depending on the method and pest. What is the pre-harvest interval? The pre-harvest interval for the product is 14 days before harvest, but it must be confirmed from the label before use. Conclusion Cyper Max 100 EC is an insecticide suitable for farmers needing to control biting and sucking insects in cereal and forage crops. With adherence to the correct dose, timing, coverage quality, and pre-harvest interval, it can be an effective part of a pest management program that helps reduce pest impact and protect the crop. Uniforum 446 SE systemic fungicide for soil 250 ml