Gasoline firewood saw two-stroke brand Tanaka TANAKA Chinese 40 cm model CN-45E

Gasoline Wood Chopper Saw TANAKA CN-45E for outdoor work Gasoline two-stroke wood saw from TANAKA brand model CN-45E is a practical chainsaw designed for cutting wood, pruning trees, and preparing timber in farms, gardens, and rest houses. It comes with a 16-inch / 40 cm cutting bar, making it suitable for medium tasks that require higher cutting power than manual saws. The saw operates with a 2T gasoline engine, relying on a gasoline and oil mixture in an appropriate ratio for operation, with a portable design that facilitates use in open areas without the need for an electrical source. It is a suitable option within the agricultural tools set dedicated to maintenance, pruning, and woodcutting at outdoor sites. Features of TANAKA Gasoline Chainsaw - Two-stroke gasoline engine suitable for outdoor cutting tasks. - 16-inch / 40 cm cutting bar for chopping firewood and medium branches. - Chain Brake system for increased safety during operation. - Separate oil tank for chain lubrication during work and reducing friction. - Portable design helps with use in farms, gardens, and remote locations. - Suitable for pruning trees, cutting wood, and preparing firewood when used correctly. - Front and rear handles for better control during operation. Technical specifications of TANAKA CN-45E saw - Product type: Gasoline wood saw / chainsaw. - Brand: TANAKA. - Model: CN-45E. - Engine type: 2T gasoline two-stroke. - Bar length: 16 inches / 40 cm. - Safety system: Chain Brake. - Lubrication system: separate oil tank for chain. - Fuel type: gasoline mixture with two-stroke oil. - Fuel mixing ratio: 25:1 gasoline to 2T oil. - Operation method: manual pull start. - Usage: chopping firewood, pruning trees, and cutting wood. - Country of origin: China. Uses of gasoline wood saw in farm and garden The TANAKA saw is suitable for chopping firewood, removing dry branches, pruning trees, and preparing timber in gardens, rest houses, and farms. It can also be used in landscaping and lawn care when a stronger cutting tool than manual saws or pruning shears is needed. This product is suitable for medium tasks and outdoor agricultural use, not intended for heavy industrial operation or continuous cutting for long periods without breaks. For better performance, use the correct mixed fuel, install the appropriate chain, and check the oil before each use. How to operate the two-stroke gasoline saw Prepare the fuel mixture at a ratio of 25:1 of gasoline and 2T oil according to instructions. Fill the fuel tank with the proper mixture, and fill the chain oil tank with designated lubricating oil. Check the chain tension and ensure it is properly fixed on the bar. Place the saw on a stable ground before starting, and do not operate it while held in the air. Gradually pull the start cord until the engine begins. Let the engine run for a few seconds before starting to cut. Use the saw with both hands while maintaining a steady stance during work. Safety instructions when using a gasoline chainsaw Wear safety glasses, gloves, and suitable ear protection during operation. Do not use the saw indoors due to gasoline engine exhaust fumes. Avoid cutting near wires, metals, or stones. Do not operate the saw with an un-tensioned or damaged chain. Turn off the engine before cleaning, adjusting, or refueling the chain. Avoid continuous operation for long periods without engine rest breaks. Keep the saw away from children and store it in a dry, safe place after use. Care and maintenance of TANAKA saw and chain To maintain efficiency, clean the bar and chain after each use, regularly check the chain oil level, and tighten the chain when needed. Use designated two-stroke oil for small engines, and avoid running the saw with an improper fuel mixture to prolong engine life. Refer to the spare parts and maintenance section when needing support supplies for tools and agricultural equipment. Frequently Asked Questions about TANAKA CN-45E chainsaw Is TANAKA suitable for chopping firewood? Yes, the saw is suitable for chopping firewood, medium-sized timber, and pruning trees, provided it is used correctly and not overloaded. What type of fuel is suitable for this saw? It requires a 25:1 gasoline to 2T oil mixture, following instructions to avoid engine damage. Can it be used indoors? No, because it runs on a gasoline engine and produces exhaust fumes. It should only be used outdoors in well-ventilated areas. If you are looking for a practical gasoline wood saw for pruning and cutting wood on the farm or garden, the TANAKA CN-45E with a 40 cm bar provides a suitable option for medium outdoor tasks. You can browse more agricultural tools and farm care equipment via Bithoor Saudi store.