Water cooling for incubators

Water-cooled incubator cooler system, innovative cooling system reduces the incubator's need for the air conditioner and does not replace the use of the air conditioner. This system is used to reduce the heat generated by the use of the humidity heater. It works with a siphon system to lift water to the cooling cell. Assembly method: The siphon wire is installed with the humidity heater wire, and the fan wire with the cooling fan system used inside the incubator, so that if the temperature rises, the fans operate to draw air and enter the carton to cool them. System dimensions: Overall width 40 cm, overall depth 5 cm, height 30 cm. Suitable for a humidity tank measuring 20*40 cm. Cooling cell size 13*30. Siphon power 50 watts. Note: If the water pressure is strong and exits outside the incubator, a flexible pipe has been installed to bend and reduce water flow. Dear customer, note that this system is still in the trial and development phase. It has been observed in some places that it causes an increase in humidity beyond the desired level. Therefore, we want to point out that we do not guarantee the success of this cooler on all incubators. We guarantee that this system works by lifting water to the carton and the fan operates to produce cool air, but we do not guarantee that it will lower the temperature or prevent humidity from rising.