6KW 10KW MPPT inverter for solar energy 220 volts 230 volts 240 volts 10000 watts 6000 watts off/grid/on-grid pure sine wave inverter home solar charge controller

PVI-6000 watt PVI-10000 watt model rated power 6 kilovolt-amperes/6 kilowatts 10 kilovolt/10 kilowatts single phase inside / single phase outside maximum photovoltaic input power 4500 watts * 2 (9000 watts) 4500 watts * 3 (13500 watts) grid operation Bevinpot (DC) maximum DC voltage 500 V DC start-up voltage / initial feed voltage 90 volts DC / 120 volts DC MPPT voltage range 60-450 volts DC MPPT trackers / maximum input current 2/18 A 3/18 A grid output (AC) rated output voltage 220/230/240 volts AC output voltage range 184-264.5VAC or 195.5-253VAC or 184-264.4VAC (selectable) rated output current 26 A 43 A power factor >0.99 maximum conversion efficiency (DC/AC) 97% off-grid AC input start-up voltage / auto-restart voltage 120-140 volts AC / 180 volts AC acceptable input voltage range 90-280 volts AC or 170-280 volts AC frequency range 50Hz/60Hz (auto sensing) maximum AC input current 40 A 50 A general dimensions, width × height (mm) 360x278x106 360x310x107 net weight (kg) 4.9 6.5 environmental humidity relative humidity from 5% to 95% (non-condensing) IP degree IP21 operating temperature -10℃～50℃ storage temperature -15℃～60℃ features: pure sine wave inverter configurable input voltage range for household appliances and PCs via LCD display network connection based on applications via LCD display compatible with electrical voltage auto-restart during AC power recovery overload / over-temperature / short circuit protection cold start function dual slope at 4KW and 6KW, triple slope at 10KW and 15KW can operate a 1.5P motor with a 4KW motor, 3P with a 6KW motor, 1.5P+3P with a 10KW motor, 3P+3P with 15KW full load solar-powered only the PVI model inverter does not require a battery connection and cannot be used with batteries. Note: Purchasing a model equipped with a WiFi unit will include a CT unit. Models without a WiFi unit do not include a CT unit. Series converters AN-PVI can also be directly connected to the grid, assuming that the application country has no grid connection certification requirements.