Marking marking paper for TwoTree TTS-55 Pro DAJA DJ6 small portable laser engraving machine you can make yourself used on ceramic glass tile

Engraving Marking Paper for TwoTrees TTS-55 Pro DAJA DJ6 Mini Portable Laser Engraver Diy Machine Used on Glass Ceramic Tiles Attation please, it cannot be used on any metal surface, like aluminum, stainless steel, iron etc. Coloring Principle The laser penetrates the color on the engraving marking paper into the object through the thermal effect, thus making it successfully colored. And the laser color marking paper is made of premium material, that is insoluble in water, anti-corrosion, non-fading, and anti-scratch, so the patterns can firmly bond to the surface of the objects. About Settings Because different lasers, different power, diffferent speed,different materials even different color paper require different parameter settings, we can't give users specific parameter values. Users need to adjust the parameters through testing to get good engraving results. About Colors Some colors may be changed after laser engraving, so the paper color looks like different from the true color, we will remark ture color on the back, please subject to marked color. About Quality All colored carved papers will be well packed, but due to long time international shipment, some slight creases or air lines may cuased, please do not worry, it is not quality issue, and won't affect the engraving. Custom Size With big size, you can cut size as you need. Backing paper : 39cm x 27cm(15.35" x 10.63") Colored paper: 36cm x 24cm (14.17" x 9.84") How to Use Step 1:Dstinguish the Front Side The color upward for the front, when sticked need to keep the front upward. Step 2:Cutting Color Paper Cut the right size according to the content of the engraving. Step 3: Soaking Color Paper Put the cut color paper into water and wet it for 1-2 minutes. Peel the colored paper from the backing after soaking. Step 4: Stick on the Object Please keep the front upward and use a scraper to remove air bubbles and creases. It is necessory to buy a scraper together. Please dry the colored paper with hair dryer before engraving. Step 5: Prepare to Engrave Place the object on the engraving machine and select the engraving pattern. Pay attention to the direction of the pattern, you may need to flip the pattern if engrave it horizonltally. Step 6: Start Engraving Waiting for the engraving process to be completed. Step 7: Soaking Color Paper Soak in water for 5 minutes after the engraving is completed. Full soaking helps to peel off excess colored paper easily. Step 8: Remove Excess Color Paper Take out the soaked object and remove the excess color paper patiently. Step 9 : Product Display DIY as you like. Compatibility Compatible with almost of laser engravers, like CO2 Laser Engraver Machine Fiber Laser Engraver Machine UV Laser Marking Machine Product Display Could be used on ceramics glass crystal stone tiles only, not suitable for other materials like leather, aluminum, stainless steel, iron etc.