12 colors of carved paper compatible with carbon dioxide fibers, semi-conductor for ultraviolet rays, laser engraving machine, stone, glass, ceramic material

12-color engraving paper compatible with carbon dioxide semi-conductor UV laser and engraving machine with stone glass ceramic materials Please note that it cannot be used on any metallic surface, such as aluminum, stainless steel, iron, etc. Why do you need it? Direct engraving on glass, ceramics, etc. may fail and cannot be colored, while laser engraving of colored paper is the best solution for these problems. About the engraving effect Colored engraving paper has high requirements for laser parameter settings and system. For fiber laser engraving machines, diode laser, UV laser, and CO2 laser, the CO2 laser engraving machine works best. Since different laser devices, materials, and colors of engraving paper require different parameter settings, we cannot provide users with specific parameter values. Users need to adjust the parameters through testing to achieve good engraving results. If you are not very professional, we suggest you buy black color first to try, because black is easy to color. Compatibility Compatible with almost all laser engraving machines, such as CO2 laser engraving machine fiber laser engraving machine UV laser marking machine Diode / semiconductor laser color change Some colors may change after laser engraving, so the color of the paper appears different from the actual color, and the real color can be seen on the back. Please consider the specific color. About quality All engraved colored papers will be well packed, but due to long international shipping, some slight creases or air lines may appear. Please do not worry, they are not quality issues and will not affect engraving. Custom size With the large size, you can cut the size according to your needs. Support paper: 39 cm × 27 cm (15.35 inches × 10.63 inches) Colored paper: 36 cm × 24 cm (14.17 inches × 9.84 inches) How to use? Please check the videos or follow the pictures. Step 1: distinguish the front side The color side facing up, when pasting, keep the front side facing up. Step 2: cut the colored paper Cut the appropriate size according to the content of the engraving. Step 3: soak the colored paper Soak the cut colored paper in water and dampen for 1-2 minutes. Remove the colored paper from the back after soaking. Step 4: stick to the object Keep the front side facing up and use a scraper to remove air bubbles and wrinkles. It is essential to buy a scraper together. Please dry the colored paper with a hairdryer before engraving. Step 5: prepare for engraving Place the item on the engraving machine and set the engraving pattern. Pay attention to the pattern direction; you may need to flip the pattern if engraved horizontally. Step 6: start engraving Wait for the engraving process to complete. Step 7: soak the colored paper Soak it in water for 5 minutes after engraving. Full soaking helps peel off excess colored paper easily. Step 8: remove excess colored paper Carefully remove the soaked object and patiently peel off the excess colored paper. Step 9: display the product DIY as you like. Compatibility Compatible with almost all laser engraving machines, such as CO2 laser engraving machine fiber laser engraving machine UV laser marking machine diode / semiconductor laser