12 color laser engraver for paper occasion for CO2 fiber ultraviolet laser engraving tools machine cutting for tile stone glass ceramic

12 colors of laser engraving paper for carbon dioxide fibers and ultraviolet tools for cutting and engraving laser for ceramic and stone tile glass Please note that it cannot be used on any metal surface, such as aluminum, stainless steel, iron, etc. About the coloring effect depends on the laser engraving machine and system parameter settings. Since different laser engraving machines, different materials, and different colors of engraving paper require different parameter settings, we cannot provide specific parameter values, users need to adjust the parameters through testing to achieve good engraving results. If you are not very professional, we suggest you buy the black color to try first, because black color is easy to color. About paper colors some colors may change after laser engraving, so the paper color appears different from the real color, and the real color will be seen on the back, please consider the specific color. About quality all engraved colored papers will be well packed, but due to long international shipping, some slight creases or air lines may appear, please do not worry, they are not quality issues and will not affect the engraving. Custom size with large size, you can cut the size according to your need. Support paper: 39 cm × 27 cm (15.35 inches × 10.63 inches) colored paper: 36 cm × 24 cm (14.17 inches × 9.84 inches) small size available to meet some small size requirements, there are 3 types of pre-cut small size papers to choose from. 24 mm × 24 mm * 150 pieces 35 mm × 15 mm * 100 pieces 40 mm × 12 mm * 100 pieces please note that due to manual cutting, there may be some bumps on the edges of the backing paper, but it does not affect its use. How to use step 1: exclude the front side color facing up, when sticking it needs to keep the front side facing up. step 2: cut colored paper cut the appropriate size according to the engraving content. step 3: soak the colored paper place the cut colored paper in water and moisten for 1-2 minutes. remove the colored paper from the back after soaking. step 4: stick to the object keep the front side facing up and use a scraper to remove air bubbles and wrinkles. it is essential to buy a scraper together. please dry the colored paper with a hairdryer before engraving. step 5: prepare for engraving place the item on the engraving machine and set the engraving pattern. pay attention to the pattern direction, you may need to flip the pattern if engraved horizontally. step 6: start engraving wait for the engraving process to complete. step 7: soak the colored paper soak it in water for 5 minutes after engraving. full soaking helps peel off the excess colored paper easily. step 8: remove excess colored paper carefully take out the soaked object and patiently remove the excess colored paper. step 9: display the product DIY as you like. soft rubber scraper this rubber scraper is made of silicone, so it can be used on flat and curved surfaces. a good partner for laser engraving work. use this rubber scraper to remove bubbles and wrinkles.