Car dent repair removal tool set, hammer, slide, 18+ suction cup, car body, no paint, puller, extractor, garage tool

Car dent repair removal tool garage hammer reverse 18 + suction cup body car without removing dent puller repair tool slide hammer why do we recommend it to you? New design, suitable for various scratch sizes. Updated high-quality tools. Car body repair tools. Latest packaging design, more convenient and easy to operate. Each tool has high quality and good reputation from professional users. Faster shipping and safe packaging. How to use: 1. Clean the dent with a clean damp cloth. 2. Mount the glue stick in the glue gun, pull the trigger to allow the glue stick to enter the glue gun, connect the power source and heat for 5 minutes. 3. Use a suitable drawing gasket. Large dents require a large drawing gasket. (Note: the larger the drawing gasket, the greater the drawing force); 4. Pull the trigger and apply the drawing gasket with the extruded glue (4 holes of the gasket should be applied with hot glue); 5. Quickly place the drawing gasket with the hot melted glue in the center of the dent, press gently until the glue cures and adheres (let the glue cool for 8 minutes. Cooling time should be less than 10 minutes and slightly shorter in winter); 6. Align the T-shaped repair tool and press the drawing gasket with hot glue, pull the sliding rod backward to lift the dent; 7. Check with the line board. If the dent still exists, tap lightly with a flattening hammer or a pen. 8. Clean the repaired area with a clean damp cloth. We provide alcohol bottles, and alcohol needs to be obtained by the customers themselves. Alcohol can wash away the glue from the car body. Contents of the package: 1 * car dent puller tool several as shown in the picture usage method 1. Clean the dent with a clean damp cloth. 2. Install the glue stick in the glue gun, pull the trigger to allow the glue stick to enter the glue gun, connect the power source and heat for 5 minutes; 3. Use a suitable drawing gasket. Large dents require a large drawing gasket. (Note: the larger the drawing gasket, the greater the drawing force); 4. Pull the trigger and apply the drawing gasket with the extruded glue (4 holes of the gasket should be applied with hot glue); 5. Quickly place the drawing gasket with the hot melted glue in the center of the dent, press gently until the glue cures and adheres (let the glue cool for 8 minutes. Cooling time should be less than 10 minutes and slightly shorter in winter); 6. Align the T-shaped repair tool and press the drawing gasket with hot glue, pull the sliding rod backward to lift the dent; 7. Check with the line board. If the dent still exists, tap lightly with a flattening hammer or a pen; 8. Clean the repaired area with a clean damp cloth.