AUTOOL SDT60 EVAP system for the car smoke tester leak detector pipe leak detection car diagnosis smoke fog leak gas detector

Description: Car Smoke Leak Detector AUTOOL SDT60 - Professional distinguished car pipe leak smoke testing device. This will help us to locate motorcycle leaks in cars on pipe systems in minutes, quickly and accurately, for example, intake system testing, exhaust system testing, car sealing testing, fuel tank system testing, testing different pipe assemblies. How to perform the leak test? 1. Fill 10 ml of baby oil with the detector for the first time. Open the hood, hang the detector on the cover. 2. Disconnect the pipe that should be connected to the detector. 3. Connect the detector to a 12V DC battery, turn on the power switch, and the detector will start working. 4. In about 30 seconds, the pipe will be filled with smoke. Check for leak points. Please use a headlamp if necessary. Why do you need the AUTOOL SDT60 smoke machine? 1. Unmeasured air entering the engine will cause all kinds of lean conditions. You cannot see leaks without smoke assistance. The vacuum line can become porous over time but looks good. Circular rings can become hard and no longer sealed. Plastic parts can detach or crack. 2. Exhaust leaks can be harmful to your health and can cause backfire in carbureted cars. You can use the AUTOOL SDT60 smoke machine to help find exhaust leaks without running the engine and running gas yourself. 3. You can smoke EVAP systems, vacuum leaks, low-pressure turbo leaks, intake manifolds, cooling/EGR/exhaust systems, old rubber, gaskets, seals, connectors, and more. 4. In modern cars, many engine fault codes are turned off by air/vacuum leaks. Quick problem connection saves time and money in the shop and helps the home mechanic find the problem instead of just replacing parts. [DPF frame fault diagnosis]: Recognize deficiency before it leads to highly restricted DPF recovery or engine activity canceled. Look for open upper current slots (exhaust reptiles, V-shaped clamps, ventilation ribs, broken pipes, compressed air spills) to avoid stopping DPF at the wrong time. [Reduce analytical time]: In addition to faster detection of versions and more skilled, the smoke machine can significantly reduce analytical time and help eliminate rebound. It can quickly find spills in super support, air cooler charging, exhaust frame, wind and water, housing, consumption frame, seals, gaskets, hoses, fittings, and the sky is the limit. [Quick hole cycle]: With protection using AUTOOL SDT60 smoke machines, finding holes can be a quick cycle instead of a big repair problem in the shop or breakdown, etc. Using a hole analyzer during routine maintenance can lead to problems and consider repairs before spills become a major issue causing waste of time and money. Full system diagnosis: 1. Auxiliary box system test: Overpressure or wear of the auxiliary box is the main cause of auxiliary seal damage and oil leaks. 2. Intake system test: Leaks in the intake system will cause insufficient engine intake, leading to reduced engine power. 3. Car sealing test: Weak air tightness in the car can cause many inconveniences such as inability to retain warmth, dust, sound insulation, water resistance, etc. 4. Fuel tank system test: Gaps in the fuel tank and pipes due to improper installation or not closing the fuel cap may cause leaks in the fuel tank system. 5. Turbo test: Coolant leaks can inform the engine of high water temperature. Testing various pipe assemblies: Smoke testing for brake hoses, electric steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc. 6. EVAP system test: Fuel vapor leaks in the evaporative system will release fuel vapor into the atmosphere, causing waste and pollution or unstable engine slowdown. 7. Exhaust system test: Discharging unrefined harmful gases into the atmosphere or increasing vehicle noise is the main defect when exhaust leaks occur. Features of AUTOOL SDT60 Car Smoke Leak Detector: 1. [Why required]: A must-have tool for vehicle techniques. AUTOOL SDT60 has its own air pump without relying on other machines and a precise pressure gauge. By observing the pressure gauge, the leak condition is clear at a glance. 2. [How it works]: First, fill the test oil with 20 ml capacity, then simply connect to a 12V DC battery, and it starts working. Soon, thick smoke will come out into the sealed pipe system. You can easily find the leak point. 3. [What’s included]: The SDT60 smoke testing device is detachable, compact, easy to store, time-saving, labor-free, and widely used in various auto repair shops. Comes with EVAP adapters, helping you apply to all vehicle EVAP systems to quickly identify leak parts. 4. [Where used]: Rapid smoke testing for EVAP systems, turbo leaks, intake systems, exhaust systems, cooling systems, car sealing, fuel tank systems, various pipe assemblies, and more. Fits all vehicle models, for example, motorcycles, snowmobiles, off-road vehicles, ATV vehicles, light trucks, speedboats. 5. [3-year warranty]: For damages caused by non-human factors, we promise to resend parts free of charge within 3 years. For any needs, we warmly welcome you to contact us, and we will reply as soon as possible within 24 hours. Main unit structure: Hook: for hanging the detector during detection. Work indicator: lights when the detector is working. Power switch: turn it on, the detector works. Smoke outlet tube: smoke outlet connected to the detection port. Power symbol clip: connects to the vehicle battery. Voltage is DC12V. Package list: 1 piece * main unit for car smoke leak detection from AUTOOL SDT60. One set * rigid rubber hose connector (with serial specifications). 1 piece * power cable clip. 1 piece * refill bottle for test oil (oil not included). 1 piece * EVAP special connector. 1 piece * smoke hose. 1 piece * user manual.