100 pieces engraved aluminum alloy business cards metal plate blanks for testing materials for laser marking machine customizable for do it yourself

50.65

84.42-40%
Pink
Red
Green
Matter Black
Shiny Black
Silver
Dark Blue
Light Blue
Yellow
Purple
100PCS

Product description

Aluminum alloy blank cards for laser engraving testing with multi-color marking are available in size: 86 × 54 mm, thickness: 0.2 mm. Attention: Power setting: Gradually adjust the laser engraving machine's power according to the thickness of the aluminum sheets and engraving requirements. In general, for thin aluminum sheets, low power is sufficient; for thick aluminum sheets, it is necessary to appropriately increase the power. Initially, you can set a lower power value, such as 20%-30% of the maximum power, then gradually adjust according to the engraving effect. Speed setting: The engraving speed of the laser engraving machine can also affect the engraving effect. Very fast speed may result in insufficient engraving depth or unclear lines, while very slow speed can affect work efficiency. Usually, for engraving metal aluminum sheets, the speed can be set between 100-500 mm/min, and the specific value should be adjusted according to the actual situation. You can first choose a moderate speed, such as 300 mm/min, then improve based on test results. Focus adjustment: By adjusting the height of the focusing mirror, the laser beam is focused on the surface of the aluminum sheets to achieve the best possible condition. When the focus is good, the laser beam energy can be concentrated in a smaller area, thus achieving higher engraving precision and depth. Whether the focus is appropriate can be determined by observing the clarity and depth of the edges of the engraved lines or patterns. If the edges are blurry or the depth is uneven, further focus adjustment is needed.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌