12 Volt Led control unit for dimming feature 11 key DC 5 Volt 12 Volt 24 Volt wireless remote control for wireless frequencies for single color LED strip smart memory

29.29

39.58-26%

Product description

11-key LED small control segment dimming RF remote 5-24 volts for 5630 2835 5050 single color LED strip battery not included. Note: 1. The battery is not included for security reasons and custom issues during transportation. 2. The battery model is CR2025, please purchase it yourself from your local market. Instructions for RF wireless remote control: 1. Power on / standby press this button to turn on the unit or switch to standby mode. The unit will turn on and restore to its previous state when powered on. 2. Lighting mode switch to lighting mode from dynamic mode. 3/8/9. Dimming shortcut adjustment switch to lighting brightness mode at 100% or 50% or 25%. 4/6. Dynamic mode adjustment switch to dynamic mode from lighting mode, or switch between different dynamic modes. 5/7. Speed adjustment adjust the speed of dynamic modes. Press SPEED+ to increase speed and press SPEED- to decrease. 10/11. Brightness (dimming) adjustment adjust the brightness of lighting mode. Press BRIGHT+ to increase brightness and press BRIGHT- to decrease. Wireless RF remote control functions: dimming and dynamic, 8 dynamic effects, 10 levels of dimming, 256 PWM degrees, adjustable speed, slim design, smooth dimming effect, 1-to-1 remote pairing, automatic save function. RF wireless remote control installation: 1. Power supply this unit accepts a DC power source of 5V to 24V. The red cable must be connected to the positive terminal and the black to the negative. Please choose the appropriate power source according to your LED application. 2. LED output connect the red cable to the positive LED cable and the black to the negative. The peak output current is 12A, please reduce the load if the main unit becomes very hot. Warning: Do not short-circuit the LED output circuit, as this may cause permanent damage! 3. Remote control please remove the insulating part before use. The RF wireless remote signal can pass through barriers, so it is not necessary to aim at the main unit when operating. To receive the remote signal properly, do not install the main unit inside enclosed metal parts. The remote battery is 3V CR2025, please replace it only with the same type of battery. Specifications: Dynamic mode: 8 modes Dynamic speed levels: 10 levels Lighting brightness levels: 10 levels PWM degrees: 256 degrees Smooth dimming effect: yes Operating voltage: DC 5 ~ 24V Output current: peak 12A Remote control mode: RF wireless Remote frequency: 433.92 MHz Remote distance: >15 meters in open area Package includes: 1 × control unit/dimming small LED light strip in line 1 × RF wireless remote control unit R106

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌