PD60 fuel injection ignition simulator ECU maintenance platform testing equipment for vehicle computer board diesel gasoline

Product functions: 1. Simulation of 12-24 volt electromagnetic diesel fuel injector. 2. Simulation of 12-volt gasoline injector. 3. Simulation of positive trigger ignition coil. 4. Simulation of negative trigger ignition coil. 5. With voltmeter and ammeter. 6. Real-time display computer unit. 7. Operating voltage and current. 8. With overcurrent protection circuit. 9. Diagnostic socket with obd. 10. With CAN data port. 11. Terminal resistance with 120Ω. 12. With high-power resistor (used to simulate fuel measurement valve). Note: This product does not contain a signal generator and cannot simulate sensor signals. Usage tips: 1. The device needs an external power source of 12-24 volts to operate normally. 2. The coil resistance for the diesel injector is very small, generally ranging from 0.3 to 0.5. 3. PD60 can simulate 12-volt - 24-volt electromagnetic diesel fuel injectors, but cannot simulate crystal piezoelectric fuel injectors. 4. The device is equipped with internal overcurrent protection. If the output power is short-circuited or the current is very high, the device will automatically turn off. 6. PD60 is a special device for automotive repair technicians. For non-professional users, please use it under the supervision of automotive repair technicians.