AUTOOL SDT50 car smoke leak detector for cars EVAP leak gas leak testing machine pipe leak oil generator diagnostic tools

AUTOOL SDT50 Car Smoke Leak Detector is a professional tool for detecting automatic pipe leaks. It will help us quickly and accurately locate motorcycle leaks in cars on the piping system, such as: vacuum leak testing, intake system testing, exhaust system testing, fuel tank system testing, turbo testing, cooling system, EGR system, and utility box system. How to perform the leak test? 1. Fill 10 ml of baby oil with the detector for the first time. Open the hood, hang the detector on the cover. 2. Disconnect the pipe that should be connected to the detector. 3. Connect the detector to a 12V DC battery, turn on the power switch, and the detector will start working. 4. In about 30 seconds, the pipe will be filled with smoke. Check for leak points. Please use a headlamp if necessary. Features of AUTOOL SDT50 Car Smoke Leak Detector: 1. [Wide range of applications] for detecting pipe system leaks on cars, motorcycles, snowmobiles, off-road vehicles, ATV vehicles, light trucks, and speedboats. Works on all brands and models of cars. 2. [Built-in air pump] The AUTO SDT50 does not require connecting other gas supply equipment, suitable for completing testing work during curing. Convenient for locating leaks. Connect the detector to a 12V DC battery, and it can produce a lot of smoke within 30 seconds after startup. Equipped with the latest AUTOOL smoke generator and a 1/2 psi high-pressure unit, ensuring continuous output of large amounts of smoke. Detects even the smallest leaks of dense smoke and helps diagnose faults quickly and accurately. Significantly improves diagnostic efficiency. 3. [Advanced technology] works on EVAP system (we also have a specially designed version for EVAP system). 4. [Overheat and frost protection] The detector has a smart protector; if the operating limit exceeds, for example, over 75℃, it will automatically shut down. 5. [3-year warranty] For damages caused by non-human factors, we promise to resend parts free of charge within 3 years. Warning: 1. When using the AUTOOL SDT50 car smoke leak detector for the first time, fill it with 10 ml of oil. Please be careful not to exceed this amount. 2. Test liquid: both paraffin liquid and baby oil are fine. 3. Fresh oil can only be added when the smoke becomes thin, and no more than 20 ml can be added each time. 4. Before adding fresh oil, pour the remaining oil into the detector and replace the detector oil regularly. During leak detection, keep it away from sensitive smoke parts. 5. Do not operate the detector for more than 8 minutes continuously; it needs intermittent rest. 6. The detector has a smart protector; if the operating limit exceeds, such as over 75℃, it will automatically shut down. In this case, please turn it on again later. 7. The circular part of this detector has a temperature; please be careful to avoid burns. 8. If the test tube needs to be disconnected in the middle, secure the other side with a rubber stopper. Packing list: 1 piece * main unit for car smoke leak detection AUTOOL SDT50 1 piece * special EVAP connector 1 piece * standard conical adapter 1 piece * power cord clip 1 piece * bottom part filled with oil for testing (oil not included) 1 piece * hook 1 piece * Josie smoke 1 piece * user manual