POWLSOJX MPPT solar power charger 60A/80A/100A optional, dual USB and 3-phase protection for street lighting/home energy systems

Description: It is possible to track the solar-powered charging control unit with the most advanced MPPT control algorithm and maximum power point of the photovoltaic array quickly in any environment so you can get the maximum energy from the solar panel and significantly improve energy use in the solar system. It can be used in the communication base station, home power supply system, traffic lighting, solar street lamp, yard lamp systems, etc. Feature: 1. Advanced MPPT maximum power point tracking technology, tracking efficiency not less than 99.5%. 2. Designed LCD screen to display operating data and device operating status dynamically. 3. Compatible with Seal, GEL, Infloded, and LifePO4 battery charging. 4. Dual USB charging ports 5 volts. 5. Automatic detection of 12V/24V/36V/48V. 6. Overvoltage protection. 7. Overcurrent protection. 8. Overtemperature protection. 9. 7 types of operation mode selection. 10. Display of control unit parameters (operation mode, battery voltage, photovoltaic charging current, battery discharge current, product operating temperature, delay time); 11. Users can modify some control unit parameters to set and save them. 12. With backlight display. 7 types of operation mode selection: 1. Charging mode: in any case, it is never discharged. 2. Light control mode: when the control unit detects night, it will delay ten minutes then start discharging; when it detects day, it will delay ten minutes then stop discharging. 3. Delay light and time control mode: when the control unit detects night, it will delay ten minutes then start discharging and countdown, if the timer stops at zero, discharging will stop. The maximum delay duration is 23:59. 4. Universal control mode: in trouble-free condition, it always continues discharging. 5. Manual control mode: uses "▼" to discharge or not. 6. Timing control mode: opens or closes discharging periodically. 7. Test mode: same as delay light and time control mode but only loses ten minutes of delay time. 8. The control unit is still discharged under low voltage protection. Hold the "▼" touch for 5 seconds, discharging continues to output. But discharging only stops manually. Note that this performance may damage the battery, be cautious with it! Specification sheet Model SA4860A SA4880A SA48100A Automatic detection voltage 12V24V36V48V cars Note: Battery must be connected first Maximum charging current 60A 80A 100A Maximum input photovoltaic solar panels 720 watts; Voc: 15-24 volts (12V battery) Maximum photovoltaic solar panels 720 watts; Voc: 15-24 volts (12V battery) Maximum photovoltaic solar panels 720 watts; Voc: 15-24 volts (12V battery) Maximum photovoltaic solar panels 1440 watts; Voc: 30-48 volts (24V battery) Maximum photovoltaic solar panels 1920 watts; Voc: 30-48 volts (24V battery) Maximum photovoltaic solar panels 2400 watts; Voc: 30-48 volts (24V battery) Maximum photovoltaic solar panels 2160 watts; Voc: 45-72 volts (36V battery) Maximum photovoltaic solar panels 2880 watts; Voc: 45-72 volts (36V battery) Maximum photovoltaic solar panels 3600 watts; Voc: 45-72 volts (36V battery) Maximum photovoltaic solar panels 2880 watts; Amplifier: 60-100 volts (48V battery) Maximum photovoltaic solar panels 3840 watts; Amplifier: 60-100 volts (48V battery) Maximum photovoltaic solar panels 4800 watts; Amplifier: 60-100 volts (48V battery) Low voltage cutoff system (solar) 12V system: 9.5 volts (adjustable) 24V system: 19 volts (adjustable) 36V system: 28.5 volts (adjustable) 48V system: 38 volts (adjustable) Battery float charge voltage 12V system: default 14.2 volts (adjustable) 24V system: default 28.4 volts (adjustable) 36V system: default 42.6 volts (adjustable) 48V system: default 56.8 volts (adjustable) Light control mode Load during daytime, load at night Timing load/start/stop operation control Light + timing mode Load during daytime, load at night + timing mode Manual control mode Manual load switch Output voltage USB 5A USB output current 2A Overcurrent discharge protection Delay protection if exceeds 5% of maximum discharge current Overcurrent charge protection Delay protection if exceeds 5% of maximum charge current Overtemperature protection MOS temperature protection at 85°C Package size 20.4*20.7.3 centimeters Weight 0.81 kg 0.87 kg 0.94 kg